Sipërfaqja metalike e një makine fillimisht është e lëmuar, por me kalimin e kohës mund të bëhet e gërvishtur dhe e shurdhër. Pamja është e rëndësishme, pasi një makinë e bukur është krenaria e pronarit, dhe një makinë me shumë defekte në formën e gërvishtjeve nuk bën përshtypje. Në mënyrë që sipërfaqja metalike të jetë me shkëlqim, e cila duket shumë e bukur, dhe në të njëjtën kohë e mbrojtur, është e nevojshme që rregullisht të lustrohet. Kjo procedurë kryhet afërsisht një herë në gjashtë muaj dhe kjo mjafton që automjeti të duket si i ri. Një makinë lustruese dhe përdorimi i pastës për lustrim metalik do të ndihmojnë për t'i dhënë një shkëlqim mat edhe çelikut inox, i cili, siç e dini, nuk mund të kthehet në një shkëlqim pasqyre.
Lustrimet
Ekzistojnë dy lloje lustrimi: pa kontakt dhe mekanik. Metoda e dytë konsiderohet më e lehta, pasi nuk kërkon krijimin kushte të veçanta ndryshe nga i pari. Metoda pa kontakt do të jetë shumë më e shtrenjtë, kështu që rekomandohet përdorimi i saj nëse ajo mekanike nuk ka pasur efektin e dëshiruar ose makina nuk i nënshtrohet opsionit të dytë të lustrimit.
Më shpesh, pasta GOI përdoret për bluarje, e cila është një substancë e gjelbër që shitet në shufra të forta. Është e lehtë për t'u përdorur - thjesht aplikojeni në rrathë lustrim ose në pëlhurë pambuku të përgatitur për procedurën. Kjo lloj paste vjen në numrat 1, 2, 3 dhe 4 dhe përdoret për lustrim të imët, mesatar dhe të trashë. Që procedura të jetë e suksesshme, ju duhet një makinë lustruese me një rrotë të ndjerë. Kini kujdes kur lëmoni pasi mund të lëndoheni nëse pajisja është e ndezur.
Për pjesë të vogla nuk rekomandohet përdorimi i një makine lustrimi - është më mirë të bëni gjithçka me dorë duke përdorur një furçë dhëmbësh. Ju duhet të aplikoni një sasi të vogël paste në këtë artikull dhe të filloni të lyeni shpejt shtresën. Nëse pasta GOI nuk është e mjaftueshme, atëherë metali mund të lëmohet edhe me gëlqere, krom, krokus dhe paste zmerile.
Makina lustruese mund të zëvendësohet me një motor konvencional nga një makinë qepëse elektrike e vjetëruar. Për ta bërë këtë, duhet të lidhni mirë rrotat lustruese në bosht.
Lustrim elektrokimik konsiderohet një opsion intensiv i punës për lustrimin e metaleve. Nuk rekomandohet për përdorim në shtëpi, pasi nuk është vetëm i ndërlikuar, por edhe potencialisht i rrezikshëm. Parimi i tij është që produkti të vendoset në një banjë të veçantë dhe për shkak të elektrolitit dhe ndikimit të rrymës korrigjohen të gjitha parregullsitë.
Nga rruga, pastat për lustrimin e sipërfaqeve të çelikut përmbajnë materiale gërryese artificiale dhe natyrore. Produktet e destinuara për bluarjen e metaleve të çmuara dhe me ngjyra përbëhen nga oksidet e kromit dhe hekurit. Në disa raste përdoren oksid magnezi, oksid kalciumi, shkumës teknik dhe talk. Nëse nuk dini cilat të zgjidhni për përpunimin e metaleve, ju sugjerojmë të njiheni me disa marka të njohura.
Pasta lustruese për metal
3M Fast Cut Plus 50417 është një gërryes me veprim të shpejtë që heq në mënyrë efektive gërvishtjet nga çdo bojë dhe siguron vetëm shkëlqim të lartë. Falë kësaj paste, lustrimi mund të kryhet disa herë më shpejt dhe cilësia nuk do të përkeqësohet fare. Është i lehtë për t'u përdorur, gjë që i jep një avantazh të pamohueshëm ndaj produkteve të tjera bluarëse.
Pasta për lustrim metalik me cilësi të lartë aplikohet duke përdorur një jastëk lustrimi. ngjyrë portokalli, një makinë lustruese pneumatike ose elektrike (1500-2500 rpm) është gjithashtu e dobishme.
Mbetjet e produktit hiqen shumë lehtë nga sipërfaqja dhe pasta nuk spërkat. Mund të përdoret si në të vjetra ashtu edhe në të reja veshje me bojë, largon mirë gërvishtjet nga llaqet me qëndrueshmëri të lartë. Për ta bërë rezultatin sa më të dukshëm dhe të qëndrueshëm, në fund të lëmimit duhet të përdorni pastën lustruese Extra Fine dhe një jastëk lustrimi të gishtave të zi 09378. Mund ta pastroni shtresën nga mbetjet e pastës duke përdorur një pecetë speciale.
Përparësitë:
- niveli i lartë i shkëlqimit;
- heqja e lehtë e gërvishtjeve;
- Mbetjet e pastës hiqen lehtësisht edhe nga sipërfaqet e sapolyera;
Pasta metalike polake është menduar për pastrimin dhe lustrimin e sipërfaqeve të bëra nga metale të ndryshme: çeliku, bakri, çelik inox, nikel dhe të tjerë. Gjithashtu siguron mbrojtje të besueshme të sipërfaqes dhe ndihmon në eliminimin e gjurmëve të korrozionit dhe ndryshkut. Efekti i tij është se gjatë lustrimit të një sipërfaqeje metalike, krijon një shtresë mbrojtëse që mbron nga korrozioni. Pasta mund të përdoret për të pastruar takëm dhe pajisje ushqimore në zonat ku përgatitet ushqimi. Plotëson të gjitha kërkesat e NSF. Mund të përdoret gjithashtu për përpunimin e rulave dhe kallëpeve industriale dhe printuese. Mund të përballojë temperaturat deri në 260°C.
Mënyra e aplikimit: së pari duhet të aplikoni pak pastë në shtresë, më pas përdorni një pecetë të veçantë, një makinë lustruese është gjithashtu e përshtatshme për të shpërndarë produktin në një lëvizje rrethore për pastrim. Pas përfundimit të lustrimit, hiqni pastën e tepërt dhe lustroni me një leckë të re derisa të shkëlqejë.
Pasta metalike Doctor Wax është ideale për lëmimin e sipërfaqeve të aluminit dhe aliazhit të magnezit. Produkti gjithashtu lustron mirë arin, çelikun, argjendin, bronzin dhe kromin. Lufton në mënyrë efektive ndryshkun dhe oksidimin, dhe gjithashtu heq gërvishtjet. Nuk përmban agresiv elementet kimike dhe gërryes të trashë. Pasta mund të përdoret për të lustruar treguesit e kthesës dhe fenerët. Për këtë do t'ju duhet një makinë lustruese.
Për të pastruar dhe për t'u kujdesur për pjesët metalike, përdorni lustrim Dursol, i cili është efektiv në veshjet e bëra nga: bakri, alumini, çeliku inox dhe kromi. Mund të përdoret për qëllime industriale dhe shtëpiake.
Mënyra e aplikimit: lustrim në një sasi të vogël aplikohet në shtresë dhe më pas fërkohet me lëvizje rrethore me peceta speciale ose përdoret një makinë lustruese. Pas kësaj, produkti i mbetur hiqet dhe lëmohet në një shkëlqim me një leckë të re.
Një nga pastat më të mira për lustrim efektiv të metaleve janë produktet Dursol, të cilat përdoren edhe për sipërfaqet plastike të kromuara dhe të llakuara. Pasta heq në mënyrë të përkryer oksidimin, njollat e bojës dhe ndryshkun, dhe gjithashtu heq gërvishtjet dhe i jep shtresës një shkëlqim.
Udhëzime për përdorim: Aplikojeni produktin në sipërfaqen e kërkuar. Për lustrim do t'ju duhet një makinë lustruese. Për të arritur shkëlqim, duhet të lustroni gjithashtu me një leckë.
Mund të jetë ndryshe. Në fund të fundit, ai përfshin disa metale të ndryshme. Baza e çelikut inox është hekuri, titani, nikeli, molibden, mangani, dhe kjo nuk është e gjithë lista. Kromi, i cili është gjithashtu i pranishëm në përbërjen e tij, e ndihmon këtë çelik t'i rezistojë korrozionit.
Çfarë e pengon çelikun të ndryshket
Kur kromi ndërvepron me oksigjenin, në sipërfaqen e çelikut inox formohet një film mbrojtës; është ky film që mbron lidhjen nga ekspozimi ndaj mjediseve agresive.
Sasia e kromit do të përcaktojë shkallën e rezistencës ndaj korrozionit të çelikut.
Për shembull, në prodhimin e frigoriferëve, përdoret një aliazh me një përmbajtje mesatare të kromit (10-17%). Por nëse pajisja është vazhdimisht në kontakt me ujin ose i nënshtrohet ngarkesave të temperaturës, atëherë përdoret një aliazh me një përmbajtje të lartë kromi, deri në 26%. Pajisjet e tilla përfshijnë larjen dhe pjatalarëse, lavamanë, kapuç, pianurat dhe çajnikët.
Ku mund të lustroj?
Në mënyrë që sipërfaqja e aliazhit të jetë e bukur dhe e lëmuar, duhet të lustroni çelikun inox. Në ditët e sotme, ka shumë kompani specializimi i të cilave është kjo procedurë e veçantë, ato vendosin në rregull produkte të ndryshme të prodhuara nga kjo aliazh. Por rezulton se ju mund të lustroni çelik inox në shtëpi.
Sigurisht, nëse keni nevojë për më shumë punë cilësore, atëherë është më mirë të kërkoni ndihmë nga specialistët. Për shembull, i lëmuar tub katrorçelik inox do të duket shumë më mbresëlënës pas përpunimit në fabrikë sesa pas përpunimit në shtëpi.
Çdo kompani që është e specializuar në lustrim do të kryejë lehtësisht këtë procedurë.
Si të përpunohet çeliku
Si të lustroni çelik inox për të shndritur një pasqyrë? Këtu është një listë e gjithçkaje që ju nevojitet:
- paste lustruese;
- rrathë të ndjerë ose të ndjerë;
- ngjitës druri;
- rrota bluarëse me madhësi të ndryshme kokrrizash;
- letër zmerile ose gur;
- bullgare.
Fazat kryesore të procesit
Procesi zhvillohet në disa faza. Së pari ju duhet të bëni një pastrim të përafërt. Më pas në progresi është duke u zhvilluar një rrotë me një bazë fibrash dhe një mulli këndor. Por kjo procedurë mund të anashkalohet me kusht që sipërfaqja e produktit të jetë tashmë mjaft e lëmuar.
Rrotat bluarëse vijnë më pas. Sipërfaqja duhet të përpunohet disa herë, dhe çdo herë madhësia e gërryesit duhet të ulet.
Nëse qarqe të tilla nuk janë të disponueshme, atëherë lehtë mund t'i bëni vetë. Për ta bërë këtë, mund të përdorni një rreth të ndjerë ose ndjerë. Duhet të aplikoni ngjitësin e drurit në të me një shpatull dhe më pas ta fërkoni mbi patate të skuqura gërryese.
Ky operacion do ta bëjë sipërfaqen e çelikut krejtësisht të lëmuar. Në asnjë rrethanë nuk duhet të mbetet ndonjë vrazhdësi. Në fund të fundit, pas lustrimit do të jetë shumë më e vështirë t'i mbyllni ato.
Hapi tjetër është të aplikoni pastën lustruese dhe një rrotë të ndjerë. Këtu është më mirë të konsultoheni me një specialist, pasi një markë specifike aliazhi kërkon një paste specifike. Natyrisht, është mirë të përdoret diamanti, zhavorri i të cilit është i përshtatshëm për metalin e destinuar për përpunim. Lustrimi përfundimtar kryhet derisa të mos ketë të meta të dukshme. Një tub i lëmuar prej çeliku inox duhet të duket thjesht i përsosur.
Çelik inox në jetën e përditshme
Asnjë kuzhinë nuk është e plotë pa pajisje inox dhe pjesë të brendshme. Kjo nuk është për t'u habitur, pasi kjo aliazh i veçantë është mjaft i fortë dhe i qëndrueshëm, veçanërisht pasi nuk kërkon kujdes të veçantë. Çelik inox përdoret shpesh për të bërë enët, takëm dhe soba, pasi ky metal ka një përçueshmëri termike mjaft të lartë.
Por ka edhe disa disavantazhe për çelikun inox: me përdorim të rregullt, ai njollos dukshëm. Kuzhina po humbet shkëlqimin e saj. Për të parandaluar që kjo të ndodhë, është e nevojshme që periodikisht të lustrohet çeliku inox. Ka shume në mënyra të ndryshme zgjidhje për këtë problem. Një pikë e rëndësishme në këtë procedurë është përzgjedhja e saktë agjent lustrim për çelik inox.
Kur pastroni produktet e çelikut, nuk duhet të përdorni kurrë agjentë zbardhues ose të përdorni sfungjerë metalikë ose furça me qime të forta.
Ka disa mënyra alternative lustrim
Vaj ulliri
Kjo metodë është vetëm për ata që po mendojnë se si të lustrojnë çelik inox në shtëpi. Enët e njollosura do të fillojnë të shkëlqejnë përsëri, si të reja. Gjithçka që ju nevojitet është vaj dhe lecka, mundësisht të bëra prej pëlhure të butë.
- Para së gjithash, ju duhet të njomni një leckë me vaj.
- Duke përdorur këtë leckë, është e nevojshme të aplikoni vaj në produkt në mënyrë që të mbulohet plotësisht me një film vaji.
- Më pas, mund të filloni lustrimin duke shtypur fort leckën e lyer me vaj në metal.
- Për të parandaluar që çeliku të bëhet përsëri i shurdhër, vaji i tepërt hiqet duke përdorur peshqirë të thatë ose peceta. Ata duhet të fërkojnë sipërfaqen derisa produkti të thahet plotësisht.
Lustrim me miell
Ju gjithashtu mund të përdorni miell për të lustruar produktet metalike. Është i mirë për pastrimin e sipërfaqeve të sheshta, të tilla si lavaman ose tigan.
- Produkti spërkatet me miell në mënyrë që të mos mbeten fare boshllëqe.
- Mielli duhet të shpërndahet në mënyrë të barabartë.
- Duke përdorur një leckë të thatë, lustroni sipërfaqen në një lëvizje rrethore.
- Më pas mielli hiqet shumë lehtë nga sipërfaqja.
Metoda mekanike
Disa pajisje dhe pajisje kanë zona të vështira për t'u arritur. Këtu lind pyetja, si të lustrohet çelik inox në një shkëlqim. Ka një mënyrë, por do t'ju duhet të shpenzoni shumë kohë dhe të bëni çdo përpjekje.
Ju duhet të blini një copë paste të ndjerë dhe gërryes. Aplikoni pastën në pëlhurë dhe lustroni sipërfaqen derisa metali të bëhet i ndritshëm dhe me shkëlqim.
Lustrim me kimikate
Kjo metodë përdoret më shpesh kur keni nevojë të pastroni sende të vogla. Gjëja kryesore është se lustrimi kërkon pak kohë dhe është shumë i thjeshtë për t'u bërë. Më poshtë janë disa receta për zgjidhje.
Receta 1
Është e rëndësishme të ruani përmasat këtu. Përmban: 230 ml acid sulfurik, 70 ml acid klorhidrik dhe 40 ml acid nitrik. Pjesa tjetër është ujë.
Për një litër tretësirë ju nevojiten edhe 5 g klorur natriumi, 5 g ngjyrë të zezë acidike dhe 10 gramë ngjitës druri.
Lëngu që rezulton duhet të nxehet në 70 gradë Celsius dhe pjesa duhet të ulet atje. Produkti mund të lihet në tretësirë për një maksimum gjysmë ore.
Receta 2
Do t'ju duhet acid ortofosforik, ai duhet të përbëjë 20-30 përqind të vëllimit të përgjithshëm. Acidi klorhidrik (3-4%), acidi nitrik (4-5%), portokalli metil (1%). Pjesa tjetër është ujë. Zgjidhja duhet të jetë temperatura e dhomës, mbajeni produktin në të jo më shumë se 10 minuta.
Receta 3
Rregullat e lustrimit janë dhënë më poshtë:
- Metali duhet të pastrohet mirë para lustrimit. Më pas, vendosni produktin në tretësirë. Duhet mbajtur mend se këtu mund të përdoret vetëm ujë i distiluar.
- Gjatë procedurës, tretësira duhet të përzihet vazhdimisht, vetëm në këtë rast reaksion kimik do të kalojë 100%.
- Pasi të ketë kaluar koha e nevojshme, pjesa hiqet dhe lahet mirë me ujë të rrjedhshëm. Pas kësaj, produkti duhet të fërkohet mirë me një pecetë të njomur me llak.
Pas këtij trajtimi, të gjitha vrazhdësitë eliminohen.
Nuk mjafton lustrimi i saktë i çelikut të pandryshkshëm; ai gjithashtu duhet të pastrohet rregullisht.
Pastrimi i lavamanit
Shpesh njollat mbeten në lavamanë - kjo është gëlqere. Është shumë e lehtë për t'u hequr me tretësirë uthull. Duhet të holloni acidin një deri në pesë dhe të fshini sipërfaqen me të dhe më pas ta shpëlani me ujë të rrjedhshëm. Për t'i dhënë metalit një shkëlqim të ndritshëm, sipërfaqja duhet të fërkohet në një lëvizje rrethore.
Pastrimi i sobës
Njollat nga salcat, yndyrat dhe ushqimet e djegura mbeten këtu. Ata do të duhet të hiqen me një agjent të posaçëm lustrim çeliku. Sigurohuni që të hiqni elementët e ngrohjes përpara pastrimit. Është mirë të përdorni llak ndërsa mbani doreza. Përndryshe, ekziston rreziku i djegies në lëkurën e duarve. Pas procedurës, këshillohet që të fërkoni mirë sipërfaqen me një leckë të thatë.
Pastrimi i kapuçit
Kjo nuk është një detyrë e lehtë. Por mjaft e realizueshme. Për të parandaluar që papastërtia dhe sapuni të njollosin sobën, është më mirë ta mbuloni me gazeta ose peshqir të vjetër.
Për të pastruar kapuçin, mund të përdorni një produkt të specializuar ose të përgatisni vetë një zgjidhje. Ju do të keni nevojë për bikarbonat sode, lëng limoni dhe uji. Produkti duhet të fërkohet me kujdes në mënyrë që të mos dëmtohet sipërfaqja. Mjafton që zgjidhja të qëndrojë në kapuç për disa minuta, pas së cilës duhet të lahet me ujë të pastër të rrjedhshëm. Më pas, duhet të lustroni mirë sipërfaqen me një leckë të thatë. Pas kësaj procedure, kapuçi do të shkëlqejë si i ri.
Lustrim inox është një përgatitje e veçantë për kujdesin e sipërfaqet metalike, i cili pastron, dezinfekton, nuk lë njolla dhe jep shkëlqim origjinal.
Fushat e aplikimit
Lustri është perfekt për kapuç, sipërfaqe pune, të jashtme pjesë metalike trupi i makinës, pjesët pajisje teknologjike, pianurat, lavamanë, djegës, frigoriferë çeliku, muret e pasme soba, miksera dhe enë kuzhine (kazan, tenxhere dhe tigan).
Për çfarë sipërfaqesh është i përshtatshëm lustrim? Përdoret në çelik inox, krom, lidhje bakri, zink, metale me ngjyra dhe sipërfaqe metalike të anodizuara.
Ky produkt lustron çelik inox deri në një përfundim pasqyre dhe jep një shkëlqim afatgjatë.
Një lustrim i veçantë për çelik inox është duke u zhvilluar për industrinë ushqimore në mënyrë që të mos shkaktojë dëm në kontakt të drejtpërdrejtë me produktin.
Karakteristikat kryesore
Karakteristikat e lustrimit për çelik inox:
- pastrim nga papastërtitë, gjurmët e pikave dhe gishtërinjve;
- duke i dhënë një shkëlqim vizual metalik sipërfaqeve të zbehura;
- zbutja e parregullsive të vogla;
- mbrojtjen nga mjedisi.
Llak i pandryshkshëm lë një shtresë mbrojtëse pas përdorimit, e cila lehtëson pastrimin e ardhshëm të sipërfaqeve.
Një lustrim cilësor shpesh nuk përmban gërryes për të qenë i sigurt për pastrimin e përditshëm. Prodhuesit me reputacion ofrojnë produkte lustruese që kanë një erë dhe ngjyrë neutrale. Në prodhim, polish përdoret shpesh si një lubrifikant.
Procesi i lustrimit mbron gjithashtu nga korrozioni që ndodh në metal për arsyet e mëposhtme:
- kontakt me pluhurin ose ashkël prej metali të zakonshëm me aliazh të ulët;
- mbrojtje e dobët gjatë transportit të produkteve të mbështjellë;
- pastrim gërryes, për shembull, defekt lokal termik i sipërfaqes;
- efektet termike; Prandaj, para se të gatuani çelik inox, mbani mend se në disa raste kjo mund të çojë në djegie të kromit.
Lustrim gjithashtu mbron nga dëmtimi. Përdoret për të hequr skorjet e saldimit, gërvishtjet, njollat nga efektet termike dhe mbrojtjen e zonave me krom të varfëruar. Në këtë rast, bluarja fillon me një gërryes me kokërr të trashë, duke kaluar në një të imët. Sa më i vogël të jetë kokrriza, aq më i mirë është rezultati dhe rezultati do të jetë një shkëlqim i barabartë në sipërfaqen e lëmuar.
Metodat e aplikimit
Llak mund të aplikohet ose me dorë ose duke përdorur një rrotë lustrimi profesional, baza e së cilës është një pëlhurë speciale shami, kaliko ose shami me densitet të ndryshme, që varet nga sipërfaqja. Për çdo rreth, kërkohet një paste përkatëse, e cila ka një numër që korrespondon me madhësinë e kokrrës. Opsioni më i mirë Për lustrim të tillë, pasta e diamantit është e përshtatshme, e cila, nga ana tjetër, ka gjithashtu madhësi të ndryshme kokrrizash.
Agjenti lustrues duhet të aplikohet në faza në 4-5 aplikime. Varet nga marka e vetë metalit, të cilat janë të lëmuara ndryshe.
Lustrim çeliku inox me dorë:
- është e nevojshme të aplikohet paste ose spërkatje në sipërfaqen që do të lustrohet;
- përgatitni një pecetë pëlhure;
- Pastroni dhe lustroni duke përdorur lëvizje rrethore;
- teprica duhet të hiqet;
- Lyejeni me një leckë të pastër derisa të shkëlqejë;
- fshijeni ose shpëlajeni me ujë (ndiqni udhëzimet në paketim).
Sipërfaqja e pasqyrës prej çeliku inox kërkon mirëmbajtje të vazhdueshme. Lustrim inox do të përmirësojë shkëlqimin natyral të sipërfaqes dhe do të rivendosë origjinalin pamjen, do të mbrojë nga lagështia dhe ndryshimet e temperaturës me ndihmën e një filmi të veçantë.
Video: Dursol paste për metal
Sipërfaqja e lëmuar e metalit dëmtohet kur trajtohet pa kujdes për shkak të veprimeve të qëllimshme njerëzore. Jo çdo gjurmë mund të hiqet polish inox dhe lecka të buta. Në një punishte shtëpiake (garazh), ekzistojnë shumë metoda për përpunimin e sipërfaqeve vëllimore, të sheshta dhe të lakuara të produkteve të aliazhit. Është e nevojshme të keni pajisjet dhe reagentët e duhur.
Bluarje me lustrim mekanik
Pas dëmtimit të përpunimit të metaleve (prerje, saldim, shpim, pastrim me furça të forta rrotulluese, goditje), formohen defekte të madhësive të ndryshme:
- gërvishtje, gërvishtje;
- seams, sagging, predha;
- patate të skuqura;
- çarje;
- burrs.
Këto përkeqësime të sipërfaqes reduktojnë rezistencën ndaj konsumit, reflektueshmërinë dhe rezistencën ndaj ngarkesave komplekse. Për të eliminuar vrazhdësinë dhe për t'i shtuar shkëlqim të tilla material i fortë, i cili është çelik inox, do t'ju duhet të kryeni 4–5 operacione. Bluarja kryhet duke përdorur një mulli elektrik dhe rrota gërryese të zëvendësueshme. Me një rreth të ndjerë/të ndjerë, pas pastrimit të ashpër, ata fillojnë të lustrojnë produktin. Rripi i pafund e bën të lehtë përpunimin e pjesëve komplekse prej çeliku inox.
Kur bluajeni përafërt çelikun inox, zhavorri gërryes është 30-40, duke përfunduar 16 – 25, lustrim me mikropluhura me kokrriza M7 – M14, sjellja në gjendje pasqyre – komponimet e gatshme industriale (lustrimet).
Veprimi mekanik i një rrethi të butë me paste të aplikuar heq një sasi shumë të vogël metali. Nivelimi me shkëlqim ndodh për shkak të rishpërndarjes së strukturës së shtresës së sipërme të çelikut inox, në vend që ta prerë atë. Nën ndikimin e ajrit, përbërësve aktivë të pastës dhe ngrohjes nga fërkimi, filmat e vjetër të oksidit shkatërrohen dhe, menjëherë, pas ftohjes, krijohen të reja.
Pas lustrimit mekanik, nuk krijohet butësi ideale dhe, në përputhje me rrethanat, shkëlqim në vende të papërshtatshme. Në këtë rast, përfundoni lustrimin me dorë. Sjellja e një përfundimi pasqyre në çelik inox me dorë është një operacion intensiv i punës, që kërkon kohë, por i realizueshëm. Krijimi i një pasqyre fillon me pastat lustruese dhe përfundon me lustrimet e lëngshme.
Është e nevojshme t'i nënshtrohet procesit i gjithë rrafshi i dukshëm - përpunimi i pjesshëm lokal do të jetë i dukshëm. Eliminoni dallime të dukshme Përdorimi i lustrimit nuk do të funksionojë.
Metoda kimike
Pjesët e vogla inox përpunohen duke përdorur një metodë që nuk kërkon shumë përpjekje fizike dhe disa orë punë. Përdorimi i rrathëve mund të jetë thjesht i vështirë. Zhyteni pjesën e pastruar të punës në një banjë me reagentë me dozë strikte, të holluar në përqendrimin e kërkuar me ujë të distiluar. Gjatë një periudhe të mjaftueshme kohore, nën ndikimin e reagentëve kaustikë, eliminohet e gjithë vrazhdësia e çelikut në kontakt me mjedisin aktiv të lëngshëm. Gërvishtjet e thella dhe shenjat e saldimit fillimisht rrafshohen me rrota zmerile, më pas lëmohen me rrathë të butë me paste të madhësisë së kërkuar të kokrrizave (GOI). Përndryshe, të gjitha të metat e mëdha gjithashtu do të lustrohen duke ruajtur formën e tyre.
Për zgjedhja e duhur përbërësit, përqendrimi i tyre në masën ujore, këshillohet të dini shkallën e çelikut inox:
- Marka X18N9T është zhytur në përbërjen e mëposhtme: acide: 230 ml sulfurik, 40 ml nitrik, 70 ml klorhidrik. Në 1 litër tretësirë shtoni ngjyrë të zezë acide - 6 g, ngjitës druri - 10 g, klorur natriumi - 6 g. Temperatura e lëngut mbahet në 65-70 ° C, koha 5÷30 minuta.
Opsione të tjera:
- Acidet në përpjesëtim me vëllimin e përgjithshëm: nitrik 4÷5%, ortofosforik 20÷30%, klorhidrik 3÷4%, metil portokalli - 1÷1,5%, në një tretësirë ujore me temperaturë 18÷25°C, Mbajtja e përafërt koha 5÷ 10 min .
- Për litër përbërje sasia e acideve: sulfurik 230 g, klorhidrik 660 g, bojë acid portokalli - 25 g Ruajtja e temperaturës 70÷75 ° C, koha 2÷3 minuta.
Për të përfunduar reagimin në të gjitha pikat dhe për të hequr produktet që rezultojnë, lëngu në enë përzihet vazhdimisht. Ju mund të lëvizni pjesën e çelikut.
Komponentët janë agresivë. Siguroni mbrojtje për lëkurën e duarve, fytyrës, syve dhe organeve të frymëmarrjes.
Rreshtimi kimik i vijës së kufirit të jashtëm të inoksit (lustrimi) ndodh sepse reagimi është më intensiv në zgjatimet e profilit. Për të parandaluar akumulimin e produkteve të ndërveprimit në depresione, gropa dhe qoshe, lëvizja e lëngut detyrohet. Pasi të keni larë reagentët kimikë, fërkojeni me një pecetë me një sasi të vogël lustrim.
Metoda e anodës
Trajtimi elektrokimik zvogëlon kohën e shpenzuar në lidhje me procedurën mekanike me 4-5 herë, duke rritur klasën e pastërtisë së pasqyrës me 1 ose 2 pozicione. Për të lustruar në këtë mënyrë, kompleksiteti i nyjeve dhe lakimi i avionëve bëhen të parëndësishëm. Kur lidhet energjia elektrike, tretësira bëhet një elektrolit aktiv, duke ndërvepruar më intensivisht. Mostra që përpunohet duhet të lidhet me anodën e instalimit. Per secilin përbërje kimikeçelik inox zgjidhni reagentët dhe parametrat e modalitetit.
Metoda kërkon elektrolit të sapopërgatitur, konsumin e energjisë elektrike dhe përdorimin e pajisjeve mbrojtëse nga punonjësi. Përgatitja paraprake e shtresës së jashtme (veçanërisht pas saldimit) është e detyrueshme. Por reflektimi i çelikut inox pas të gjitha operacioneve është i njëjtë me atë të argjendit ose nikelit të sapo lëmuar.
Metoda e prodhimit të një elementi çelik inox ndikon në kohën e kaluar në banjë:
- stampim 4÷6 min;
- saldim, trajtim termik 10÷12 min;
- derdhja pas spërkatjes me rërë deri në gjysmë ore.
Lustrim me plazmë
Teknologjia ndryshon nga procedura elektrokimike në parametrat e mëposhtëm:
- zgjidhja nuk është agresive, asgjësimi nuk kërkon pastrim të veçantë;
- voltazhi është më i lartë (220 V);
- temperatura është rreth 100 ° C.
Reagenti i përdorur është kripa e amonit me përqendrim në tretësirë 3,1 ÷ 6,0% Dendësia e rrymës elektrike është vendosur në 0,35 ± 0,15 A/cm², në zonën e kontaktit të elektrolitit me çelik inox formohen intensivisht flluska gazi. Shkarkimet ndodhin në avullin brenda shtratit të lëngshëm, duke jonizuar mediumin. Shfaqen gjuhë plazmatike që veprojnë në mënyrë specifike mbi çelikun, duke e lustruar atë. Koha e nevojshme për një zhytje është brenda 6 minutave, bazuar në konsumin e energjisë prej 5 Wh/cm².
Për një proces të qëndrueshëm të lustrimit të elektroplazmës sipërfaqësore zonë të caktuar, kërkohet fuqia e duhur e instalimit. Ju nuk mund ta zvogëloni vlerën e tij me shpresën për të rritur kohëzgjatjen e trajtimit në banjë. Kushtet për formimin e një shtrese të jonizuar plazmatike nuk do të plotësohen.
Përgatitja e paskrupullt mekanike do të jetë e dukshme. Gjurmët e mbetura të saldimeve, gërvishtjeve dhe gërvishtjeve nuk mund të fshihen me lustrim.
Frekuenca e kujdesit për pamjen
Përveç lustrimit periodik të elementeve të përparme strukturore në gjendjen e një pasqyre me shkëlqim, pronari i zellshëm kujdeset vazhdimisht për to. Rivendosja e gjendjes së veshjes së pjesëve të makinave kryhet nga qendra e shërbimit 2 herë në vit. Për të mbrojtur shkëlqimin e induktuar, përdoren lustrimet. Produktet prodhohen në formën e emulsioneve të lëngëta dhe formulimeve dhe koncentrateve më të trasha. Paketimi i lustrimeve për çelik inox është shumë i ndryshëm - nga tubat (75 ml), shishet, kavanozët në fuçi (20-100 l). Kjo është një mbrojtje e përditshme kundër efekteve gërryese të pluhurit dhe papastërtive, dhe efekteve gërryese të faktorëve natyrorë. Teknika është e thjeshtë: leckë e butë, lëvizje rrethore, pa boshllëqe. Aplikoni lustrim në mënyrë të barabartë dhe hiqni tepricën. Nëse dëshironi, mund të përdorni një vegël elektrike me shpejtësi deri në 1500 rpm. Rrotullimi paralel me rrafshin që përpunohet në mënyrë që të mos dëmtohet fundi i timonit.
Produkti do të shkëlqejë si i ri, edhe nëse është restauruar me saldim pjesë-pjesë.
Lustrim inox na ndihmon të rinovojmë sipërfaqen dhe ta bëjmë atë të shkëlqejë shumë shpejt në një mënyrë të thjeshtë. mekanikisht. Por kjo nuk është gjithmonë efektive. Cilat metoda janë më efektive dhe sa të aksesueshme janë ato për përdorim shtëpiak?
1 Në çfarë ndryshimesh çon lustrimi?
Lustrim është faza e fundit në prodhimin e produkteve të ndryshme. Ky proces konsiston në shkrirjen e një shtrese sipërfaqësore me trashësi 0,01–0,03 mm. Si rezultat, të gjitha defekte të vogla(mikroçarje, gërvishtje, zgavra, etj.). Sipërfaqja është krejtësisht e lëmuar dhe reflekton dritën. Ky efekt arrihet për faktin se thellësia e parregullsive është më e vogël se gjatësia e valës së dritës së dukshme.
Ju mund të arrini një sipërfaqe metalike të ngjashme me pasqyrën në mënyra të tjera, për shembull, duke e honuar. Por zakonisht kërkojnë pajisje speciale, materialet dhe njohuritë. Prandaj, përdorimi i tyre justifikohet vetëm kur është e nevojshme të sigurohet një saktësi e caktuar. Me lustrim gjithçka është shumë më e thjeshtë. Shumë prej tyre përdoren për këtë operacion. makina të thjeshta, dhe një mjet lustrimi mund të bëhet edhe në shtëpi. Felt, lëkura dhe pëlhura e butë performuan mirë. Pasta speciale të bëra nga oksidi i kromit, tripoli ose krokus shiten në treg dhe në dyqane. Këto materiale përdoren për metodën mekanike, por ka edhe metodat kimike trajtim sipërfaqësor në solucione speciale.
Përgatitja e duhur e produktit është shumë e rëndësishme. Prania e defekteve të ndryshme në sipërfaqe nuk lejohet, kështu që para lustrimit ekziston një fazë bluarjeje (heqja e një shtrese më të trashë). Për të gjetur të metat e fshehura, lustrimi fillon nga zonat më të dobëta. Për shembull, këto janë shtresat ku gjenden më shpesh mikroçarjet ose zgavrat. Lustrimi i çelikut të pandryshkshëm, si dhe i materialeve të tjera, bëhet në disa mënyra, duke zgjedhur çdo herë një material pune me madhësi më të vogël kokrrizash. Për më tepër, është e dëshirueshme të zvogëlohet numri i operacioneve në minimum.
2 Metoda mekanike - klasike të arritshme për të gjithë
Kjo është mënyra më e lehtë për të arritur një sipërfaqe të lëmuar si pasqyra. Ai konsiston në sa vijon. Shpejtësia e lartë e rrotullimit të materialit lustrues dhe fërkimi që rezulton çon në një rritje të temperaturës, si rezultat i së cilës shtresa më e hollë sipërfaqësore shkrihet dhe bëhet krejtësisht e lëmuar.
Ekzistojnë dy lloje lustrimi - i ashpër dhe i imët. E para është bërë me materiale me kokrriza më të trashë dhe është e nevojshme për të eliminuar vrazhdësinë e sipërfaqes. Mjetet e punës janë pasta ose shirita të posaçëm mbi të cilat aplikohen grimcat gërryese. Lustrim i fundit është faza përfundimtare. Në këtë rast, pluhurat speciale dhe pastat e holla lustruese, të cilat gjithashtu përmbajnë surfaktantë, kanë gjetur përdorimin e tyre. Ato aplikohen vetëm në rrathë të butë të bërë nga materiali elastik, të cilat përdoren për të fërkuar produktin që përpunohet.
Ju mund ta bëni lustrimin me dorë, por do t'ju duhet shumë kohë. Prandaj, do t'ju duhet të merrni një të veçantë. Përpunimi fillon me materialin me kokërr më të trashë, dhe më pas çdo herë pasuese është e nevojshme të zvogëlohet përgjysmimi i masës së gërryesit. Në këtë rast, është më mirë të mos vendosni shpejtësinë mbi 4500 rpm. Lustrim përfundimtar fillon me zonat ku dallohen gërvishtjet e vogla.
Sidoqoftë, nëse po flasim për elementë të vegjël të një forme të thjeshtë, atëherë është e mundur të shmangni elektropolirimin e çelikut inox dhe të përdorni metodën manuale. Në këtë rast, një pastë e veçantë aplikohet në një copë ndjesi ose pëlhurë tjetër të butë dhe sipërfaqja fërkohet në një lëvizje rrethore. Gjithashtu metodë manuale nuk mund të shmanget gjatë përpunimit vende të vështira për t'u arritur, Ku Sander nuk do të mund ta marrë atë.
3 Lustrim kimik - veçori dhe receta
Me këtë metodë, produkti zhytet në tretësirë kimike dhe mbajeni për një kohë të caktuar. Është gjithashtu shumë e rëndësishme të pajtoheni regjimi i temperaturës. Si rezultat i proceseve kimike, mikro-parregullsitë në sipërfaqe shkrihen, dhe rezulton krejtësisht e lëmuar. Avantazhi kryesor i kësaj metode është shpejtësia e lustrimit; procesi zakonisht zgjat disa minuta. Ju gjithashtu nuk keni nevojë për një mjet të posaçëm energjetik ose burim energjie. Ju bëni përpjekje minimale, ndryshe nga metoda manuale. Përveç kësaj, sipërfaqja është e lëmuar në mënyrë të barabartë pavarësisht nga konfigurimi. Zgjidhje e lëngshme depërton edhe në vendet më të izoluara të pjesës.
Me gjithë bollëkun e avantazheve, ka edhe disa disavantazhe. Së pari, është më pak me shkëlqim, kështu që ky lustrim zbatohet vetëm kur pjesa nuk ka nevojë për sipërfaqe pasqyre. Së dyti, zgjidhja është jetëshkurtër, ndaj do t'ju duhet të punoni intensivisht pas përgatitjes së saj. Së treti, përzierja është shumë agresive, kështu që Vëmendje e veçantë duhet të merren parasysh masat paraprake të sigurisë. Puna kryhet vetëm me veshje speciale dhe me ajrim të mirë të dhomës. Zgjidhjet me bazë acidi përdoren për lustrimin kimik të çelikut inox.
Përbërja nr. 1
Përzieni 660 g/l acid klorhidrik, 230 g/l acid sulfurik dhe 25 g/l ngjyrë acid portokalli. E ngrohim tretësirën në 70–75 °C dhe e zhysim pjesën në të. Mjafton ta mbani për rreth 3 minuta. Në këtë rast, këshillohet të përzieni periodikisht përzierjen ose të tundni produktin, përndryshe në disa zona të sipërfaqes mund të grumbullohen flluska gazi, të cilat do të ndikojnë negativisht në cilësinë e lustrimit.
Të gjitha recetat supozojnë përdorimin e acideve të përqendruara.
Përbërja nr. 2
Ju gjithashtu mund të shtoni surfaktantë (surfaktantë), glicerinë dhe alkool benzil në tretësirë. Përzierja përfshin 25-35 pjesë të acidit fosforik, 5 pjesë të acidit nitrik dhe klorhidrik, 0,5 pjesë të acidit sulfosalicilik dhe 0,5 pjesë të kripës dinatriumi të acidit etilendiaminetraacetik (EDTA). Ju duhet gjithashtu 1 pjesë glicerinë, dhe përmbajtja e alkoolit benzil nuk kalon 0,1 pjesë.Si surfaktantë përdoren trietanolamina, etilen glikol dhe oksifos, përmbajtja e këtyre substancave nuk është më shumë se 0,015; 0.017 dhe 0.01 pjesë përkatësisht. Produkti prej çeliku inox fillimisht degresohet me një zgjidhje alkaline, më pas lahet në ujë të rrjedhshëm dhe thahet. Ndërkohë nxeheni masën në 80°C dhe zhytni pjesën në të për maksimum 3 minuta.
Përbërja nr. 3
Në këtë rast merren 20–30% ortofosforik, 4–5% nitrik dhe rreth 4% acid klorhidrik, si dhe përfshihet edhe 1,5% portokalli metil. Çdo gjë tjetër është ujë i distiluar. Tretësira nxehet në një maksimum prej 25 °C dhe koha e përpunimit varion nga 5 deri në 10 minuta. Për të përmirësuar cilësinë e lustrimit, produkti duhet të përzihet periodikisht.
4 Lustrim elektrokimik - çfarë do të ndryshojë prania e rrymës?
Gjatë lustrimit elektrokimik të çelikut inox, produkti gjithashtu zhytet në një zgjidhje, por vetëm në këtë rast një rrymë elektrike kalon nëpër të. Ka një film të hollë oksidi në metal; trashësia e tij nuk është e njëjtë në të gjithë sipërfaqen për shkak të pranisë së mikrodepresioneve dhe mikroprotrusioneve. Është më i trashë në gropa. Tretësira e acidit reagon më intensivisht në vendet ku kjo shtresë mbrojtëse hollohet. Për shkak të këtij ndryshimi në shpejtësinë e reagimit, sipërfaqja është krejtësisht e lëmuar dhe dukshëm cilesia me e mire sesa pas përpunimit. Veshjet kanë një strukturë të grimcuar dhe nuk kanë pore, gjë që redukton ndjeshëm koeficientin e fërkimit.
Përparësitë e kësaj metode përfshijnë cilesi e larte sipërfaqe, performancë e shkëlqyer. Lustrim elektrokimik nuk kërkon përpjekje fizike si me përpunimit Për më tepër, faza e degreasimit mund të eliminohet. Sipërfaqja lustrohet shumë shpejt. Plus gjithçka veshje galvanike kanë forcë të shkëlqyeshme ngjitjeje në sipërfaqet e lëmuara mekanikisht.
Por disavantazhet përfshijnë varësinë nga energjia elektrike dhe konsumi i saj. Për më tepër, produkti duhet së pari të lëmohet mekanikisht. Lustrim elektrokimik është i ndjeshëm ndaj cilësisë së përbërjes, temperaturës së elektrolitit, kohës së mbajtjes dhe densitetit të rrymës. Si në metodë kimike, do t'ju duhet të punoni me komponime që janë të dëmshme për trupin, kështu që ne jemi të sigurt që t'i kushtojmë vëmendjen e duhur masave paraprake të sigurisë. Për lustrimin elektrokimik të çeliqeve inox përdoren kryesisht elektrolite të bazuara në acide sulfurik, kromi dhe fosforik.
Përbërja nr. 1
Merrni 730 g/l acid fosforik dhe jo më shumë se 700 g/l acid sulfurik. Shtohen trietanolaminë 4–6 g/l dhe shumë pak katapinë (0,5–1,0). Tretësira nxehet në një temperaturë prej të paktën 60 °C dhe jo më shumë se 80 °C. Një rrymë me një densitet prej 20 deri në 50 A/dm 2 bartet përmes produktit. Lustrimi elektrokimik zgjat rreth pesë minuta.
Përbërja nr. 2
Pjesët e bëra nga çelik inox krom-nikel-molibden ose krom-nikel vendosen në përbërjen e acideve ortofosforike dhe sulfurike, të marra në një raport përkatësisht 65% dhe 15%. Shtohen gjithashtu 12% glicerinë, 5% anhidrid kromi dhe ujë i pastruar (3%). Procesi zhvillohet në temperatura nga 45 në 70 °C dhe një densitet të rrymës prej rreth 7 A/dm 2. Koha e mbajtjes varet nga një sërë faktorësh. Mjafton të lustrohen produktet e salduara vetëm për 10-12 minuta dhe më pas spërkatje me rërë duhet të mbahet në tretësirë për rreth gjysmë ore.
5 Lustrim me plazmë - i vështirë por efektiv
Ekziston një metodë tjetër e trajtimit të sipërfaqes bazuar në proceset në metal kur zhytet në një zgjidhje dhe njëkohësisht ekspozohet ndaj tensionit të lartë. Ndryshe nga metoda e mëparshme, përdoren vetëm komponime miqësore me mjedisin bazuar në kripërat e amonit.
Thelbi i lustrimit plazmatik të çeliqeve inox është si më poshtë. Produkti duhet të jetë një anodë pozitive. Kur ekspozohet tension të lartë mbi 200 V, elektroliti fillon të vlojë pikërisht në sipërfaqen e pjesës, gjë që çon në formimin e një guaskë të hollë avulli-gaz (50-100 mikronë). Elektricitet, kur kalon nëpër këtë film, kontribuon në shfaqjen e proceseve plazmatike. Në vendet e mikroprotrusioneve, tensioni rritet ndjeshëm fushe elektrike, e cila çon në shfaqjen e shkarkimeve të pulsit.
Lustrimi i plazmës heq nga produkti një shtresë shumë të hollë me një përmbajtje të lartë të përfshirjeve të huaja. Si rezultat, sipërfaqja ka një shkëlqim pasqyre dhe ka veti të larta ngjitëse. Për më tepër, kjo metodë kombinon tre operacione në të njëjtën kohë: heqjen e yndyrës, gdhendjen dhe aktivizimin e sipërfaqes. Megjithatë, për të arritur rezultatin e dëshiruar, sipërfaqja e produktit duhet të përgatitet me kujdes. Çdo defekt, rrezik, gërvishtje etj. pas një trajtimi të tillë nuk do të eliminohet, por, përkundrazi, do të bëhet edhe më i dukshëm. Prandaj, lustrimi paraprak i përafërt manual nuk mund të shmanget.