Kompania Arma-Stroy ofron për të porositur materialin termoizolues LOGICPIR Bathhouse. Ne garantojmë respektim të rreptë të kontratës dhe afateve të dorëzimit të produkteve, të cilat mund t'i blini me çmimin më të ulët në rajon.
LOGICPIR Bath është një material i projektuar posaçërisht për izolimin termik të dhomave me avull të banjove dhe saunave. Pllakat përdoren për izolimin e mureve dhe tavaneve.
Në linjën LOGICPIR, seria Bath përfaqësohet si një linjë e veçantë. Ky është një material miqësor me mjedisin, ultra i hollë, i qëndrueshëm dhe i besueshëm i bërë nga lëndë të para polimer me koeficientin më të ulët të përçueshmërisë termike. Struktura celulare dhe mbushja e "xhepave" me gaz inert bëri të mundur arritjen e një rritje të karakteristikave teknike të pllakave LOGICPIR Banya në krahasim me parametrat e ngjashëm të materialeve tradicionale me më shumë se dy herë.
Për shkak të vetive të larta të izolimit termik dhe teknologjisë së shtrimit të izolimit, dhoma e avullit nxehet shpejt. Izolimi, si një pallto leshi, mban nxehtësinë brenda. Gama e temperaturës për përdorimin e materialit është -65+110 C. Një dhomë me avull me cilësi të lartë kërkon një izolim kaq të besueshëm dhe të qëndrueshëm.
Avantazhet e izolimit të banjës LOGICPIR
- Pllakat ultra të holla nuk kërkojnë shumë hapësirë për izolim me cilësi të lartë, kështu që hapësira e brendshme nuk humbet hapësirën e dobishme.
- Materiali nuk digjet. Nën ndikimin zjarr i hapur shtresat e sipërme të pllakave shkrihen, duke bllokuar hyrjen e flakës në shtresat e brendshme.
- Izolimi ruan nxehtësinë sa më shumë që të jetë e mundur, efikasiteti i përdorimit të tij është 2-2,5 herë më i lartë se kur izoloni një dhomë me avull me materiale tradicionale.
- ME jashtë materiali është i mbuluar me fletë metalike, prandaj ka higroskopikitet të lartë.
- Polimeret moderne nga të cilat është bërë izolimi janë të sigurt për njerëzit dhe mjedisin në çdo temperaturë funksionimi. Materiali është kimikisht inert, rezistent ndaj kërpudhave, mykut dhe kalbjes.
- Qelizat e mbushura me gaz nuk thithin lagështi, kështu që materiali mund të konsiderohet i papërshkueshëm nga uji.
- Prodhuesi garanton ruajtjen e karakteristikave cilësore të izolimit për një periudhë mbi 25 vjet.
Karakteristikat e instalimit
LOGICPIR Pllakat izoluese të banjës furnizohen në opsione të ndryshme Trashësia: 2-5 cm, me rritje prej një cm Ato ngjiten në mbështjellësin prej druri të mureve dhe tavaneve me kunj dhe vida. Për të siguruar izolim me cilësi të lartë, nyjet ngjiten me shirit të metalizuar. Kur mbuloni më tej sipërfaqen, rekomandohet të lini një hendek ajri prej 2 cm ose më shumë midis mbështjellësit dhe izolimit termik.
Sa më e ngrohtë të jetë sauna, aq më pak dru zjarri
Përshkrim i produktit:
LOGICPIR Bathhouse është një izolim i teknologjisë së lartë me efikasitet energjetik PU me një strukturë të ngurtë celulare, e cila, falë karakteristikave të saj teknike, është 2/3 më e lartë se ato të ngjashme. materialet termoizoluese. Falë vetive të kursimit të nxehtësisë së LOGICPIR Bathhouse (koeficienti i përçueshmërisë termike 0,022 W/m*K) dhe veçorive të veshjes së izolimit, banja nxehet shpejt dhe shtresa izoluese është një pengesë e besueshme midis temperaturave të larta dhe të ulëta, si p.sh. një pallto leshi, që ruan nxehtësinë në dhomë. Një banjë moderne ka nevojë për një izolim kaq të besueshëm dhe të qëndrueshëm.
Përparësitë:
1. Kursen hapësirë për shkak të trashësisë minimale
2. Nuk mbështet djegien dhe nuk përhap flakë
3. Reflekton dhe ruan nxehtësinë sa më shumë që të jetë e mundur (0,022 W/m C)
4. Izolimi me fletë metalike nuk kërkon pengesë avulli
5. I sigurt për mjedisin në të gjitha temperaturat
6. Nuk ka frikë nga lagështia
7. Ruan karakteristikat gjatë gjithë jetës së tij të shërbimit (25 vjet)
Zona e aplikimit:
Pllakat termoizoluese LOGICPIR Bath janë të destinuara për t'u përdorur si izolim i mureve dhe tavaneve në dhomat e avullit gjatë ndërtimit të banjove dhe saunave.
Metoda e montimit:
Pllakat termoizoluese LOGICPIR Bath janë ngjitur me qepje të ndara përmes një shkopi druri duke përdorur kunja dhe vida vetëpërgjimi me hapje jo më shumë se 400 mm. Pas kësaj, nyjet e pllakave ngjiten me shirit të aluminuar me gjerësi 50 mm për të marrë një shtresë të mbyllur të papërshkueshme nga avulli që mbron në mënyrë të besueshme të gjithë strukturën nga lagështia. Duke përdorur lidhëse metalike (gozhda përfundimi ose kapëse), rreshtimi prej druri është ngjitur në mbështjellës. Kur vendosni shtresën përfundimtare, krijohet një hendek ajri prej të paktën 20 mm midis izolimit dhe mbështjellësit.
Magazinimi:
Pllakat termoizoluese LOGIC PIR Bath duhet të ruhen në një vend të thatë në ambiente të mbyllura në një pozicion horizontal në pirgje në një distancë prej të paktën 1 m nga pajisjet e ngrohjes.
Lejohet ruajtja nën një tendë, duke i mbrojtur ato nga reshjet dhe rrezet e diellit. Është gjithashtu e mundur të ruhet jashtë në paketim special që mbron nga ndikimet e jashtme atmosferike për jo më shumë se 3 muaj.
Afati i garantuar i ruajtjes së pllakave të banjës LOGIC PIR është 2 vjet nga data e prodhimit, në varësi të respektimit të rregullave të transportit dhe ruajtjes. Pas skadimit të periudhës së garancisë, pllakat e banjës LOGIC PIR duhet të kontrollohen për pajtueshmërinë me kërkesat e këtij standardi organizativ dhe, nëse ato përputhen, mund të përdoren për qëllimin e synuar.
Karakteristikat fizike dhe mekanike:
Emri i treguesit |
Njësia |
LOGICPIR Banjë |
Grupi i ndezshmërisë |
||
Rezistenca në shtypje në deformim 10%. |
||
Përçueshmëri termike në 25 ˚С |
||
Thithja e ujit sipas vëllimit për 28 ditë |
Jo më shumë se 1 |
|
Temperatura e funksionimit |
||
Dendësia |
Parametrat e logjistikës
LOGICPIR Banjë
Trashësia, mm |
||||
Gjatësia, mm |
||||
Gjerësia, mm |
||||
Numri i pllakave në një paketë, copë |
||||
Sipërfaqja e një pllake, m² |
||||
Zona e produktit në një paketë, m² |
||||
Vëllimi i produktit në një paketë, m³ |
||||
Pesha e një pako, kg |
*Në varësi të dizajnit, mund të përdorni edhe pllaka banjoje LOGICPIR L në trashësi 30, 40 dhe 50 mm.
TN-WALL SISTEMI Banjo PIR
Emri i shtresës |
|
Muri prej druri (tulla, blloqe, etj.) |
|
Korniza e tavanit |
|
Pllaka termoizoluese LOGIC PIR Bath F/F, STO 72746455-3.8.1-2014 |
|
Shirit vetëngjitës alumini |
|
Torno 20x30 mm |
|
Veshja e brendshme (eurolining) |
Përparësitë
Nuk kërkon pengesë avulli për shkak të izolimit të fletës
Nuk mbështet djegien dhe nuk përhap flakë
Mbajtja e një qarku të vazhdueshëm termik nga izolimi
Kursen hapësirë për shkak të trashësisë minimale të izolimit
LOGICPIR Bathhouse është një izolim PU i teknologjisë së lartë, me efikasitet energjetik me një strukturë qelizore të ngurtë, i cili, për shkak të karakteristikave të tij teknike, është 2/3 më i lartë se materialet e ngjashme termoizoluese. Falë vetive të kursimit të nxehtësisë së LOGICPIR Bathhouse (koeficienti i përçueshmërisë termike 0,022 W/m*K) dhe veçorive të veshjes së izolimit, banja nxehet shpejt dhe shtresa izoluese është një pengesë e besueshme midis temperaturave të larta dhe të ulëta, si p.sh. një pallto leshi, që ruan nxehtësinë në dhomë. Një banjë moderne ka nevojë për një izolim kaq të besueshëm dhe të qëndrueshëm.
Përparësitë
Kursen hapësirë për shkak të trashësisë minimale;
Reflekton dhe ruan nxehtësinë sa më shumë që të jetë e mundur (0,022 W/m C);
Izolimi me fletë metalike nuk kërkon pengesë avulli;
I sigurt për mjedisin në çdo temperaturë;
Ruan karakteristikat gjatë gjithë jetës së tij të shërbimit (25 vjet).
Zona e aplikimit
Pllakat termoizoluese LOGICPIR Bath janë të destinuara për t'u përdorur si izolim i mureve dhe tavaneve në dhomat e avullit gjatë ndërtimit të banjove dhe saunave.
Karakteristikat themelore fizike dhe mekanike
Parametrat e logjistikës
* Në varësi të dizajnit, mund të përdorni edhe pllaka banjoje LOGICPIR L në trashësi 30, 40 dhe 50 mm.
Metoda e montimit
Pllakat termoizoluese LOGICPIR Bath janë ngjitur me qepje të ndara përmes një shkopi druri duke përdorur kunja dhe vida vetëpërgjimi me hapje jo më shumë se 400 mm. Pas kësaj, nyjet e pllakave ngjiten me shirit të aluminuar me gjerësi 50 mm për të marrë një shtresë të mbyllur të papërshkueshme nga avulli që mbron në mënyrë të besueshme të gjithë strukturën nga lagështia. Duke përdorur lidhëse metalike (gozhda përfundimi ose kapëse), rreshtimi prej druri është ngjitur në mbështjellës. Kur vendosni shtresën përfundimtare, krijohet një hendek ajri prej të paktën 20 mm midis izolimit dhe mbështjellësit.
Magazinimi
LOGICPIR Pllakat termoizoluese të banjës duhet të ruhen në një dhomë të thatë dhe të mbyllur në një pozicion horizontal në pirgje në një distancë prej të paktën 1 m nga pajisjet ngrohëse.
Lejohet ruajtja nën një tendë, duke i mbrojtur ato nga reshjet dhe rrezet e diellit. Lejohet gjithashtu të ruhet jashtë në ambalazh të veçantë që mbron nga ndikimet e jashtme atmosferike për jo më shumë se 3 muaj.
Afati i garantuar i ruajtjes së pllakave të banjës LOGICPIR është 2 vjet nga data e prodhimit, në varësi të respektimit të rregullave të transportit dhe ruajtjes. Pas skadimit të periudhës së garancisë, pllakat LOGICPIR Banya duhet të kontrollohen për pajtueshmërinë me kërkesat e këtij standardi organizativ dhe, nëse ato përputhen, mund të përdoren për qëllimin e synuar.
Përparësitë e sistemit
- Nuk kërkon pengesë avulli për shkak të izolimit të fletës;
- Nuk mbështet djegien dhe nuk përhap flakë;
- Mbajtja e një qarku të vazhdueshëm termik nga izolimi;
- Kursen hapësirë për shkak të trashësisë minimale të izolimit;
Një banjë e paizoluar kërkon një kohë të gjatë për t'u ngrohur, dhe një sasi e madhe energjie harxhohet për të mbajtur një temperaturë konstante në të. Sa më e lartë të jetë temperatura brenda dhomës, aq më shumë nxehtësi do të dalë nga zarfi i ndërtesës. Izolimi i banjës ju lejon të siguroni ngrohjen e tij të shpejtë, temperaturë të qëndrueshme brenda dhomës dhe të ulni koston e ngrohjes disa herë. Por çfarë ndodh me banjat që ndodhen brenda, sepse ato janë të izoluara mjedisi i jashtëm dhe tashmë keni izolim në formën e mureve të tjera?
Sauna, e cila ndodhet brenda shtëpisë, gjithashtu duhet të izolohet. Në dhomat ngjitur me të, temperatura është shumë më e ulët, kështu që nxehtësia do të priret atje. Si rezultat, termike ose Energjia Elektrike do të shpenzohet për ngrohjen e panevojshme të dhomave fqinje. Për më tepër, për shkak të ndryshimit të temperaturës midis dhomës së avullit dhe dhomave fqinje, në mënyrë të pashmangshme do të formohet kondensimi, i cili çon në akumulimin e lagështirës brenda strukturave. Dhe kjo mund të kërcënojë më tej shfaqjen e mykut në muret ngjitur me banjën dhe shkatërrimin e strukturës së ndarjeve midis dhomës së avullit dhe dhomave të tjera. Si rezultat, kjo do të sjellë jo vetëm shkatërrimin e banjës, por edhe muret mbështetëse dhe ndarjet pranë ndërtesës. Prandaj, është e nevojshme të izoloni tavanin e banjës, muret e tij dhe, nëse është e nevojshme, dyshemenë.
5 arsye për të izoluar saunën/banjën tuaj
Izolimi i një banjë nga brenda do t'ju lejojë të:
- Ulni ndjeshëm koston e energjisë elektrike ose karburantit të ngurtë për ngrohjen e saunave dhe banjave.
- Parandaloni kalbjen e të gjitha pjesëve prej druri të strukturës në kushte lagështia e lartë, që nënkupton rritjen e jetës së shërbimit të të gjithë strukturës.
- Zgjatni jetëgjatësinë e furrave duke punuar në një mënyrë të butë pa ngarkesa shtesë.
- Zvogëloni kohën e nevojshme për të ngrohur plotësisht dhomën e avullit, duke siguruar një temperaturë të qëndrueshme brenda për kohën e kërkuar.
- Rritni sigurinë nga zjarri të dhomës duke përdorur izolim rezistent ndaj zjarrit, për shembull, izolim me fletë metalike.
Por gjatë ndërtimit apo rindërtimit të banjove, termoizolimi shpesh neglizhohet dhe vendoset vetëm letër alumini, duke besuar se efekti i saj reflektues do të sigurojë izolim të mjaftueshëm të dhomës. Gabimi i këtij këndvështrimi konfirmohet nga të dhënat në tabelën e mëposhtme.
Krahasimi i humbjes së nxehtësisë nga muret e jashtme të një banjë për 1 sq. m.
Materiali i murit - druri me trashësi 150 mm
Rreshtim i brendshëm - rreshtim
Temperatura brenda dhomës së avullit +70°C
Kërkesat kryesore për izolimin termik për një sauna/banjo me avull
Përveç kësaj Rregulla të përgjithshme, të cilat duhet të plotësojnë të gjitha materialet izoluese me cilësi të lartë, izolimi termik për një banjë me avull ose sauna duhet të plotësojë kërkesat e mëposhtme:
- Prania e një shtrese mbrojtëse (folie)
- Rezistencë ndaj lagështirës dhe avullimit
- Rezistenca ndaj zjarrit
- Miqësia ndaj mjedisit
Prania e një shtrese mbrojtëse (folie).Meqenëse banjat dhe saunat janë dhoma në të cilat ndodhet një burim i fuqishëm nxehtësie - një sobë, izolimi i thjeshtë për dhoma të tilla nuk mjafton. Efiçencë shumë më e madhe mund të arrihet duke përdorur izolimin me fletë metalike, e cila ka vetitë e reflektimit të energjisë termike. Izolimi konvencional, i cili ka përçueshmëri të ulët termike, thjesht parandalon transferimin e nxehtësisë, por nxehtësia është ende shumë më e ngadaltë, por shkon në mjedisi, ose në dhomën ngjitur. Përdorimi i izolimit termik reflektues në dizajnet e banjove dhe saunave lejon ruajtjen maksimale të spektrit të plotë të rrezatimit termik në ambiente të mbyllura. Është termoizolim reflektues që siguron ngrohje të shpejtë dhe mbajtje afatgjatë të nxehtësisë me kosto më të ulëta (“efekt termos”) dhe jep një efekt termik të dukshëm.
Rezistencë ndaj lagështirës dhe avullimit. Rezistenca ndaj lagështirës është e nevojshme në mënyrë që izolimi të mos fillojë të humbasë vetitë e tij. karakteristikat e izolimit termik dhe përkeqësohen nën ekspozimin e vazhdueshëm ndaj ajrit të lagësht. Ju duhet të bëni izolimin e dhomës së avullit me duart tuaja bazuar në këtë fakt. Në rastin e përdorimit të izolimit të papërshkueshëm nga avulli - PIR-borde PIRRO - nuk ka nevojë për barrierë shtesë avulli.
Rezistenca ndaj zjarrit. Kur bëhet fjalë për rezistencën ndaj zjarrit, jo vetëm klasa e djegies së materialit është e rëndësishme, por edhe regjimi i temperaturës për funksionimin e tij. Ndryshe nga dhomat e zakonshme, izolimi në një sauna përdoret në kushte ekstreme, sepse temperatura brenda saunës mund të arrijë 100 °C ose më shumë, dhe lagështia - 100%. Për shembull, temperatura kufitare kur përdorni shkumë polistireni të ekstruduar është 80 °C, mbi të cilën materiali fillon të deformohet.
Miqësia ndaj mjedisit. Ndryshe nga testi standard për termoizolimin e ndërtesave në një temperaturë prej 20°C, testet u kryen në dy kushte temperaturash: 40°C dhe 100°C. Sipas rezultateve të testit, edhe në 100°C, vëllimi i migrimit të substancave të dëmshme në model mjedisi ajrorështë dukshëm nën vlerat e pranueshme. Pllakat PirroUniversal PIR janë të përshtatshme për izolimin e dhomave me kushte ekstreme të funksionimit - temperaturë dhe lagështi të lartë - sauna, banja, pishina.
Cila është mënyra më e mirë për të izoluar banjat?
Kur krijoni një shtresë të mirë izoluese termike në një banjë, është e nevojshme të merren parasysh kushtet specifike të funksionimit të saj në të ardhmen. Jo çdo material mund të përballojë ndryshimet ekstreme dhe të shpeshta të temperaturës, lagështinë e lartë dhe ekspozimin ndaj avullit. Izolimi nuk duhet të përmbajë substanca që i nënshtrohen dekompozimit termik, fibra të ndezshme ose higroskopike. Izolimi termik PIR - materiali ka të gjitha cilësitë e nevojshme të një materiali termoizolues efektiv dhe të besueshëm.
Pllakat PIR PIRRO janë pllaka termoizoluese të bazuara në poliizocianurate (PIR) me sistem qelizash të mbyllura, të veshura me alumin shumështresor. Alumini me shumë shtresa luan rolin e një shtrese të ngushtë ndaj difuzionit, duke siguruar izolim të avullit dhe ajrit.
Termoizolimi PIR dërrasat PIRRO Ideale për izolimin e dhomave me lagështirë me ndryshime të larta të temperaturës. Pllakat rekomandohen për izolimin e mureve dhe tavaneve të banjove dhe saunave, si dhe të sipërfaqeve të mureve dhe tavaneve. Izolimi PIR është i aplikueshëm për ndërtime dhe rikonstruksione të reja, i pajtueshëm me çdo material të strukturave mbajtëse.
- Kursimi i hapësirës. Aftësia e lartë e izolimit termik ju lejon të përgjysmoni shumën e kërkuar izolim, dhe kur instalohet direkt në gur ose mur druri rrisni hapësirën e dhomës së avullit me 10 cm.
- Reflektimi i nxehtësisë. Laminat alumini u përdor si veshje për izolimin PIR për banjot dhe saunat, gjë që lejon që një pjesë e nxehtësisë të reflektohet përsëri në dhomë, duke rritur shkallën e izolimit termik të strukturës.
- Siguri nga zjarri. Kur ekspozohet ndaj flakës, ajo formon një kore karboni në sipërfaqe, duke parandaluar përhapjen e zjarrit thellë dhe përgjatë sipërfaqes. Materiali nuk mbështet djegien dhe nuk formon pika të nxehta të shkrirjes gjatë një zjarri.
- Rezistent ndaj lagështirës dhe jo higroskopik. Një izolim i tillë termik për banjot dhe saunat nuk thith kondensimin nga ajri dhe nuk ndikohet nga uji. Pllakat izoluese nuk do të lagen dhe nuk do të tkurren; ato nuk janë të ndjeshme ndaj kalbjes. I reziston ndryshimeve të temperaturës dhe lagështisë së lartë në dhomat e banjës.
- Mbrojtja e strukturave mbyllëse. Izolimi PIR për banjot dhe saunat parandalon depërtimin e lagështirës në strukturat e mureve dhe tavanit, duke i mbrojtur ato nga myku dhe myku. Nuk kërkohet një pengesë shtesë e avullit; ngushtësia e plotë e dhomës së avullit arrihet duke ngjitur nyjet e pllakave me shirit alumini.
- Instalim i lehtë. Izolimi termik për një banjë është i lehtë për t'u përpunuar dhe instaluar. Profilizimi i skajeve të çerekëve dhe pllakave me gjuhë-dhe-gropë në të gjitha anët rrit besueshmërinë dhe ngushtësinë e shtresës së izolimit termik. Ndryshe nga izolimi pambuku i veshur me fletë metalike, ngjitja e nyjeve me shirit alumini është e shpejtë, pasi pllaka PIR nuk ulet kur ushtrohet presion në shirit. Pllaka përfshin një rreshtim të petëzuar prej alumini të ngushtë ndaj difuzionit. Nuk kërkohet një shtresë e veçantë e barrierës së avullit. Izolimi termik PIR në pllaka është i lehtë, kështu që është i përshtatshëm për t'u punuar në hapësira të ngushta.
- Besueshmëria dhe qëndrueshmëria. Rezistent ndaj temperaturave, nuk lëshon substanca të dëmshme. Stabiliteti i dimensioneve.
- Miqësia ndaj mjedisit. Materiali nuk është i ndjeshëm ndaj insekteve dhe brejtësve. Eliminon shfaqjen e mykut, kërpudhave dhe marimangave. Nuk lëshon substanca të dëmshme edhe në temperatura mbi 100 gradë.
Pllaka PIR PirroUniversal, PirroThermo
është një zgjedhje unike për izolimin e mureve dhe tavaneve të banjove dhe saunave, si dhe për izolimin e sipërfaqeve të tavanit në zona të lagështa. Trashësia e përdorur është 30 mm dhe 50 mm. Pllakat PIR termoizoluese janë të përshtatshme si për strukturat prej guri ashtu edhe për ato prej druri.Karakteristikat teknike të pllakave PIR PirroThermo
Karakteristikat teknike të pllakave PIR PirroUniversal
Pllakat PIRRO PIR janë të lehta për t'u instaluar, janë të përshtatshme për çdo ambient, pavarësisht nga materiali ndërtimor dhe mosha e ndërtesës. Pllakat janë ngjitur drejtpërdrejt në bazën e gurit ose kornizë druri. Një sistem izolimi ku pllakat bashkohen duke përdorur një sistem çerek dhe forcohen më tej shkumë poliuretani dhe shirit alumini, është ideal për kushte të vështira operimi të shoqëruara me ndryshime të forta të temperaturës dhe lagështisë.
Lidhni pllakat duke i shtypur fort së bashku. Nëse pllakat nuk takohen fort në qoshet e mureve, nyjet e tyre gjithashtu duhet të mbushen me shkumë. Pas tharjes, hiqni shkumën e tepërt me thikë. Të gjitha nyjet e pllakave duhet të ngjiten me shirit alumini.
Hapi 4
Instalimi i shufrave mbështetëse për fiksimin e rafteve. Prisni një copë bordi izolues pak më të madh se bordi mbështetës. Fusni dërrasën mbështetëse të raftit përmes pllakave PIR Pirro-Universal në mur dhe aplikoni ngjitës me shkumë në shtresat. Pasi shkuma të jetë tharë, priteni tepricën me thikë dhe gjithashtu mbyllni zonat e mbetura me shirit alumini.
Hapi 5
Përgatitja e bazës për ngjitjen e pllakave. Bëni një prerje përgjatë pllakës përballë lartësisë së bazës së pllakave të ardhshme. Hiqni laminatin e aluminit nga zona ku do të vendosen pllakat. Nëse është e nevojshme, aplikoni abetare në sipërfaqe (sipas udhëzimeve të hidroizolimit) dhe aplikoni hidroizolim sipër. Pllaka bazën.
Hapi 6
Sigurojeni dërrasën e kapëseve në udhëzuesit e mbështjellësit.
- Rekomandohet përdorimi i pllakave PirroUniversal PIR jo vetëm për izolimin e mureve dhe tavanit në dhomën e avullit, por edhe në dhomën e larjes.
- Për të izoluar saunën përdorni pllaka PirroUniversal me trashësi 30 mm dhe dimensione 1200x600 mm me profile çerek.
- Është gjithashtu e mundur të lidhni pllakat duke përdorur ngjitës poliuretani, sipas rekomandimeve të prodhuesit.
- Pllakat PIR PirroUniversal kanë shenja grafike të aplikuara në sipërfaqen e përparme të pllakës në formën e një rrjeti 100x100 mm. Kjo do t'ju lejojë të prisni dhe fiksoni pllakat shumë më mirë dhe më shpejt kur i instaloni vetë.
- Rekomandohet instalimi i izolimit për një banjë nga poshtë lart, në rreshta horizontale, por me një lartësi tavani prej 2400 mm do të jetë i përshtatshëm instalimi i tyre vertikalisht.
- Për të ngjitur nyjet e pllakave, mjafton të përdorni shirit fletësh 40-50 mm të gjerë.
- Nëse është e nevojshme të zgjidhni një vrimë në pllakën e tavanit PIR për tubin e daljes, atëherë ajo duhet të bëhet 100 mm më e madhe se diametri i saj. Hendeku që rezulton duhet të plotësohet material fijor, Për shembull, lesh guri, dhe mbylleni me fletë ngjitëse.
- Vendndodhjet e publikimit telat elektrik nën llambat përmes izolimit PIR duhet të shkumohet dhe të mbulohet me shirit alumini.
LOGICPIR Bath - izolim me folie poliuretani për sauna, dhoma me avull, banja. Materiali është 2/3 më efikas se analogët, siguron ngrohje të shpejtë të dhomave dhe mbron me siguri nga humbja e nxehtësisë. E fortë, ka një strukturë qelizore. Lehtë për t'u instaluar, trashësia e vogël kursen hapësirë në sauna dhe dhoma me avull.
Përparësitë
Trashësia- 30-50 mm. Kjo kursen hapësirë gjatë izolimit të brendshëm.
I papërshkueshëm nga zjarri. Pas kontaktit me zjarrin, shtresa e jashtme shkrihet, duke formuar një matricë karboni. Parandalon përhapjen e flakës.
Përçueshmëri termike- 0,22 W/m°K. Treguesi minimal midis materialeve të kësaj klase. Vetitë e izolimit termik përmirësohen më tej nga një shtresë folie, e cila reflekton dhe nuk transmeton nxehtësi.
Ekonomik. Kostoja e përgjithshme e punës zvogëlohet - nuk kërkohet një pengesë avulli për shkak të shtresës së fletës.
Bërë nga poliuretani i ngurtë- miqësore me mjedisin material i sigurt. Nuk lëshon erë të huaj, nuk lëshon substanca të dëmshme në asnjë temperaturë.
Nuk laget, nuk thith lagështi, nuk kalbet. Në shtresën termoizoluese dhe në sipërfaqen e saj nuk krijohen myku, myku etj.
Jeta e shërbimit - 50 vjet, gjatë së cilës materiali ruan vetitë e tij.
Instalim i lehtë për shkak të rezistencës së lartë në shtypje të materialit. Rreziku i dëmtimit aksidental është minimal.
Qëllimi
Kompania Westmet rekomandon blerjen e një banjoje LOGICPIR për izolimin e dhomave me avull, saunave, etj. Materiali është i përshtatshëm për izolimin termik të mureve, dyshemeve dhe tavaneve. Mund të përdoret për izolimin e nxehtësisë dhe zërit të dyshemeve me ngrohje, të përshtatshme për rregullimin e dyshemeve në ambiente banimi, komerciale dhe publike.
Procedura e instalimit
Përgatitja e bazës. Sipërfaqja e murit, dyshemesë ose tavanit pastrohet nga mbeturinat dhe nivelohet. Të çarat janë vulosur. Sipërfaqja e bazës nuk duhet të ketë asnjë defekt. Duhet të nivelohet sa më shumë që të jetë e mundur. Mungesa e parregullsive kontrollohet me një raft 2 m të gjatë; depresionet më të mëdha se 5 mm hiqen.
Mbërthimi i izolimit termik. Përdorni mbërthyes të përkohshëm për të instaluar pllakat. Vendosini ato me nyje fundore të kompensuar (të shkallëzuara). Pas heqjes së lidhësve të përkohshëm, vrimat e mbetura mbushen me shkumë ndërtimi dhe mbyllen me shirit. Tjetra, pllakat ngjiten në mur përmes pllakave prej druri duke përdorur vida vetë-përgjimi ose dowels. Hapi midis lidhësve nuk është më shumë se 40 cm.
Shtresë kundër avullit. Izolimi ka një strukturë shumështresore, shtresa e sipërme i formuar me petë, i papërshkueshëm nga avulli. Për të krijuar një hermetike shtresa e barrierës së avullit Lidhjet e pllakave të formuara gjatë instalimit janë ngjitur shtesë me shirit alumini. Kjo siguron mbrojtje nga lagja, lagështia nga avulli dhe kondensimi.
Përfundimi. Shiritat e fiksuar më parë përdoren si mbështjellës. Rreshtimi është i lidhur me të me gozhdë ose kapëse metalike të mbarimit (rekomandohet përdorimi i drurit të fortë).
Magazinimi
Paketimet me izolim të banjës TECHNONICOL LOGICPIR ruhen horizontalisht. Ato mund të grumbullohen. Materiali vendoset në një dhomë të thatë në një distancë prej të paktën 1 m nga burimet e nxehtësisë.
Materiali mund të ruhet jashtë në paketimin e tij origjinal për 3 muaj. Paketimet mund të vendosen nën një tendë në mënyrë që të mos ekspozohet ndaj rrezeve të diellit ose reshjeve.
Në varësi të këtyre kërkesave periudha e garancisë ruajtje për termoizolim TECHNONICOL LOGICPIR Banjë - 2 vjet (nga data e prodhimit). Nëse kjo periudhë ka skaduar, siguria e vetive të tij themelore monitorohet përpara instalimit të materialit.
Trashësia e materialit zgjidhet sipas dizajnit të mureve (trashësia maksimale e pllakave është 50 mm).
Karakteristikat fizike dhe mekanike
Parametrat e logjistikës
Në varësi të dizajnit, mund të përdorni pllaka banjoje LOGICPIR në trashësi 50 mm.