Llojet e tullave
Tregu modern i ndërtimit sot na pret me një bollëk të materialeve të ndryshme të murit. Por, pavarësisht kësaj, tullat tradicionale të ndërtimit nuk e humbasin popullaritetin e tyre të madh, megjithëse janë mjaft "të vjetra" në moshë. Sigurisht, llojet e sotme të tullave ndryshojnë nga paraardhësit e tyre - tullat e baltës - si dita nga nata. Ata ruajnë nxehtësinë në mënyrë të përsosur, tolerojnë lagështinë e lartë dhe çdo ndryshim të temperaturës, dhe, për këtë arsye, janë optimale për ndërtimin e ndërtesave në Rusi. Shumica e njerëzve bëjnë dallimin midis tullave ndërtimi të kuqe dhe të bardha. Megjithatë, në realitet ka shumë më tepër lloje tullash. Shumëllojshmëria e llojeve të tullave shpjegohet nga fusha të ndryshme të aplikimit. Tulla mund të ndryshojë jo vetëm në formë dhe madhësi, por edhe në përbërjen e saj, si dhe në teknologjitë e përdorura për prodhimin e saj. Tulla është një nga materialet më të njohura të ndërtimit, megjithatë, nuk është aq e lehtë të kuptosh shumëllojshmërinë e pasur të llojeve të tullave.
Llojet dhe karakteristikat e tullave bazuar në materialin e prodhimit:
- Tulla qeramike.
Kjo lloj tulle është bërë nga balta, ndonjëherë një përzierje e llojeve të ndryshme të balta, dhe pas derdhjes dhe tharjes kalon në pjekje në temperaturë të lartë (rreth 1000 gradë Celsius). Tullat qeramike që nuk kanë qenë në furrë për një kohë të mjaftueshme mund të identifikohen nga ngjyra e tyre (më e lehtë se zakonisht) dhe tingulli (i shurdhër). Tulla e bukur Ajo ka një sipërfaqe mat dhe, kur goditet, prodhon një tingull karakteristik kumbues. Kërkohet që në thyerje të jetë poroz, homogjen dhe i lehtë. Nëse tulla ka çarje të thella jashtë dhe zbrazëtia brenda, konsiderohet e dëmtuar. Kërkesat kryesore për produktet e gatshme janë paraqitur në një GOST të veçantë për tulla (ky është GOST 530-2007 "Tulla dhe gurë qeramike").
- Tulla silikate.
Ky lloj tullash është bërë nga një përzierje e rërës dhe gëlqeres. Përparësitë e tij kryesore janë izolimi i mirë i zërit dhe përçueshmëria e reduktuar termike. Muret e hollë të ndërtuara nga tulla rërë-gëlqere do të kenë të njëjtat karakteristika izolimi të zërit dhe ruajtjes së nxehtësisë si muret shumë më të trasha të bëra me tulla qeramike. Disavantazhi i tij në krahasim me tulla qeramike është rezistenca e ulët ndaj lagështirës. Kjo është arsyeja pse tulla e bardhë përdoret vetëm në ndërtimin e mureve dhe ndarjeve, por nuk përdoret në ndërtimin e vatrave, themeleve, sobave, etj.
- Tulla me hiperpresivë.
Ky lloj tullash është bërë nga një përzierje e veçantë e përbërë nga 90% gur gëlqeror, 8% të tjera nga çimento dhe dy nga një bojë speciale. Përzierja shtypet në forma të veçanta, duke rezultuar në një shufër ideale në formë dhe ngjyrë, e cila përdoret për lloje të ndryshme të punimeve të mbarimit dhe përballimit. Me strukturë heterogjene prodhohen edhe tulla me hiperpresion, të cilat përdoren për veshjen nën të ashtuquajturin “gur i grisur”.
Llojet e tullave sipas qëllimit të përdorimit:
- Tulla e zakonshme.
Tulla e zakonshme (tulla ndërtimi ose e quajtur edhe tulla standarde, tulla e kuqe, tulla muri, tulla mbushëse, tulla balte, tulla e ashpër, tulla pune) përdoret gjerësisht për themelet e ndërtimit, si dhe për ndërtimin e besueshëm strukturat mbajtëse. Më pas mund të lyhet ose suvatohet. Falë kësaj, tullave nuk ka nevojë t'i jepen cilësi të larta estetike të jashtme. Për shkak të kësaj, një bllok i kësaj tulle ka një strukturë dhe ngjyrë heterogjene, mund të ketë defekte të ndryshme, etj., Por kjo nuk ka një rëndësi të veçantë, pasi në asnjë mënyrë nuk ndikon në treguesit e forcës së një tulle të këtij lloji dhe të kësaj. treguesi është plotësisht konsistent i standardit shtetëror.
- Tulla përballë.
Ky lloj tullash (tulla me fytyrë, tullë me fytyrë, tullë përfunduese, tullë fasade) mund të karakterizohet si një material ndërtimi me ballafaqim të mirë, pa defekte të huaja, me ngjyrë uniforme. Këto cilësi vlerësohen veçanërisht në mesin e materialeve të përballimit. Gjatë prodhimit të tij, është e rëndësishme të respektoni të gjitha standardet e recetës dhe teknologjinë e prodhimit, përndryshe mund të shfaqen përfshirje të huaja të panevojshme ose mund të gjenden shqetësime në strukturën e shtresës gëlqerore. Për tullat me përfshirje gëlqerore, lagështia është shumë e rrezikshme, pasi mund të fillojë reaksion kimik, e cila cenon integritetin e materialit ndërtimor. Sipas kërkesave GOST për të gjitha cilësitë e tullave dhe të saj pamjen, devijimet në madhësi për këtë lloj tullash nuk duhet të jenë më shumë se 4 milimetra në gjatësi, 3 milimetra në gjerësi dhe dy deri në tre milimetra në trashësi. Megjithatë, ndryshe nga tullat e përafërt, tulla e përballuar i plotëson standardet shumë më mirë dhe vërehet me saktësi të lartë. Ekspertët dallojnë dy lloje tullash ballore: tulla me teksturë, e cila ka një sipërfaqe reliev, dhe tulla në formë, e cila përdoret për përfundimin e hapjeve të dritareve, qosheve dhe pjesëve të tjera dekorative të fasadave të ndërtesës. Forma dhe struktura jo standarde ndihmon për të krijuar një dizajn vërtet unik të çdo ndërtese, duke i dhënë rrumbullakësi skajeve dhe duke ngritur struktura të harkuara.
Oriz. 1. Ngjyrat bazë të tullave ballore.
Fildishi, kashtë, e kuqe, terrakote, kafe
- Tulla prej zjarri.
Ky lloj tullash është menduar për të bërë si të brendshme ashtu edhe përfundimi i jashtëm një shumëllojshmëri të oxhaqeve dhe sobave. Meqenëse duhet të plotësojë kërkesat më të larta të funksionimit, tulla e zjarrit ka densitet të mirë, peshë të lartë, është rezistente ndaj nxehtësisë së fortë dhe është në gjendje të përballojë ndryshimet e temperaturës të rendit 1000 gradë. Zakonisht, tulla zjarri ka ngjyrë të verdhë (rërë).
- Tullë klinker.
Emri i këtij lloji të tullave vjen nga emri i teknologjisë së përdorur në prodhimin e saj. Gjatë kësaj procedure, shtresat individuale të argjilës sinterohen derisa të formohet një masë e fortë. Si rezultat, mund të shmanget formimi i shumë defekteve që shfaqen në formën e shqetësimeve strukturore dhe përfshirjeve të huaja. Meqenëse tulla e klinkerit është homogjene, është një material ndërtimi vërtet i fortë me rezistencë të shtuar ndaj konsumit. Dhe fakti që nuk ka kufizime në teksturë dhe ngjyra e lejon atë të mbulojë nevojat e shumta të tregut të ndërtimit, sepse mund të përdoret për të kryer një gamë të gjerë punimesh, si shtrimi, veshja etj.
Llojet e tullave qeramike sipas metodës së prodhimit:
Tulla të derdhura plastike
Ky lloj tullash është më i popullarizuari sepse... nuk ka kufizime në përdorim. Përftohet duke shtypur nën shtypje e lartë. Shiriti i formuar kalon një procedurë tharjeje dhe pjekjeje. NË furrë speciale nxehet në një temperaturë prej 800-1000 gradë. Ndonjëherë temperatura mund të jetë më shumë se 1000 gradë, nëse kërkohet nga rregulloret e ndërtimit.
Tulla të derdhura gjysmë të thata
Tullat e presuara gjysmë të thata bëhen nga balta duke shtypur dhe pastaj pjekjen e tullave. Për këto qëllime, nuk ka as nevojë të thahet tulla. Vërtetë, fusha e aplikimit të tullave të derdhura gjysmë të thata është e kufizuar, sepse ... ky lloj tulla ka një strukturë më poroze, prandaj, lagështia bëhet e rrezikshme për të. Si rezultat, nuk mund të përdoret për ndërtimin e mureve mbajtëse, gardheve dhe strukturave të ndryshme, pasi ato nuk do të jenë të qëndrueshme. Tulla e presuar gjysmë e thatë mund të përdoret me sukses për ndërtimin e dyshemeve dhe mureve të brendshme, sepse ka përparësi të tilla si një sipërfaqe e lëmuar dhe e barabartë dhe gjeometria ideale. Muret e bëra prej tij nuk kanë nevojë fare për nivelim, dhe kjo kursen ndjeshëm para dhe kohë.
Karakteristikat e tullave.
Cila është zgavra e një tulle
Tulla qeramike (shpesh quhen tulla murature, tulla mbushëse, tulla balte, tulla e kuqe) mund të jetë i ngurtë ose i zbrazët (tullë e çarë, tullë efektive).
Tulla të ngurta
Tulla që nuk ka zbrazëti (përmes vrimave) ose me zbrazëti jo më shumë se 13% (sipas GOST 530-2012 klauzola 3.4) mund të jetë e lëmuar, e valëzuar ose e rrudhur për lehtësinë e aplikimit të suvasë.
Tulla e zbrazët (tulla e çarë, tulla e shpuar)
Tulla me vrima (zbrazëti) forma të ndryshme dhe madhësive, për shkak të të cilave një tullë e tillë ka a) më pak peshë, e cila zvogëlon ngarkesën në themel (pesha e një tulle të çarë është më e vogël se pesha e një tulle standarde të ngurtë), dhe b) kapacitet më të madh termoizolues, i cili lejon zvogëlimin e trashësisë së mureve me tulla. Çmimi i tullave e fortë më e lartë se një tullë me vrima .
Oriz. 2. Boshllëku i tullave.
Tullë e ngurtë, tullë me vrima (të zbrazëta).
Madhësia dhe pesha e tullave.
Kur zgjidhni një tullë, duhet të dini dimensionet e saj. Ekzistojnë tre madhësi standarde kryesore të tullave të përdorura në ndërtim:
Madhësia dhe pesha e tullave të vetme
Quhet gjithashtu tulla standarde ose tulla me një rresht, ka një madhësi standarde 250x120x65 mm, ku lartësia e tullës është 65 mm, dhe pesha është 2-2,3 kg. ;
Madhësia dhe pesha e një tulla e gjysmë
Kjo tullë e trashur ka një madhësi prej 250x120x88 mm, një lartësi prej 88 mm dhe një peshë prej 3-3,2 kg. ;
Madhësia dhe pesha e tullave të dyfishta (Guri)
Quhet gjithashtu gur i dyfishtë, tulla 2NF me përmasa 250x120x138 mm, lartësi 138 mm dhe peshë 4.8-5 kg.
Më shumë informacion rreth lloje të ndryshme tulla:
Të lira dhe në kërkesë material murature, e nevojshme në ndërtimin e vilave, fasadave, muret e brendshme. Ata ndërtojnë prej saj tipe te ndryshme gardhe, ndërtesa shtepiake, harqe, ndarjet e brendshme. Asnjë projekt i vetëm me ngritje të ulët sot nuk mund të bëjë pa M50, i cili ruan të gjitha vetitë e tullave të markës dhe është në të njëjtën kohë i përballueshëm.
Llojet e tullave M50
- fytyrës/fytyrës;
- beqar/një e gjysmë;
- e plotë dhe e zbrazët.
Forca M50, pavarësisht nga lloji, struktura, dendësia - 50 kg/1 centimetër katror.
Më e këndshme nga pikëpamja estetike është ballafaqimi i tullave të përftuara nga pjekja e argjilës. premium. Materiali i zbrazët ka zgavra funksionale në strukturën e tij. Për shkak të reduktimit të përçueshmërisë termike, zvogëlon nevojën për izolim. Druri i ngurtë përmban jo më shumë se 13% zbrazëti; ai ruan nxehtësinë më keq, por është më rezistent ndaj ngricave.
Kontrolli i cilësisë
Shenjat e teknologjisë së saktë të prodhimit:
- ngjyra është më e ndritshme në thelb sesa në skajet;
- skajet e qarta pa patate të skuqura.
Kur preket, tulla me cilësi të lartë prodhon një tingull kumbues karakteristik. Një goditje me çekiç ose një rënie nga 1,5-2 m çon në dërrmim në gur të grimcuar të imët.
Në faqen tonë të internetit do të gjeni tulla M-50 me çmime të ulëta me shumicë.
Konsulentët tanë do të jenë gjithmonë të lumtur t'ju ofrojnë çdo informacion shtesë. Thirrni!
Tregu i ndërtimit na përshëndet me një bollëk të tillë materialesh muri sa ndonjëherë nuk dini kujt t'i drejtoheni me pyetje dhe si të studioni gjithçka që ofrohet. Rishikimin e sotëm ia kushtuam tullave tradicionale të ndërtimit, të cilat, megjithë moshën e tyre "të avancuar" prej disa mijëra vjetësh, nuk e humbasin popullaritetin e tyre si të besueshme, të qëndrueshme dhe rezistente ndaj Kushtet e motit material.
R?ben tulla klinker Chelsea
Çfarë di për të një person i patrajnuar? Shumica e njerëzve bëjnë dallimin midis të kuqes dhe tulla e bardhë, megjithatë, ka shumë lloje të tjera të këtij guri, dhe ato ndryshojnë jo vetëm në ngjyrë, por edhe në formë, madhësi, përbërje të lëndëve të para dhe teknologjive të prodhimit. Pra, çfarë duhet të dini për tullat.
Tulla është një material ndërtimi në formë gur artificial formën e duhur.
Llojet e tullave sipas materialit
Tulla qeramike
E bërë nga balta (nganjëherë një përzierje e argjilave të ndryshme), pas derdhjes dhe tharjes kaloi në pjekje në temperaturë të lartë (rreth 1000 ° C). Kjo është tulla e kuqe më e njohur. Një gur i cilësisë së lartë ka një sipërfaqe mat, të ashpër; kur goditet, prodhon një tingull karakteristik kumbues; kur thyhet, është poroz, homogjen dhe i lehtë. Kërkesat për tulla balte janë paraqitur në GOST 530-2007 "Tulla qeramike dhe gurë".
Tullat qeramike vijnë në dy lloje: tulla ndërtimi aktuale - quhet edhe mur, mbushje, bazament, murature, balte ose tulla e zakonshme; dhe tulla ballore.
Bërë nga një përzierje rëre dhe gëlqereje (90% rërë kuarci dhe 10% gëlqere ajrore), zakonisht dallohet nga ngjyra e bardhë, por sipas kërkesës mund të bëhet me shtimin e çdo pigmenti me ngjyrë.
Përparësitë kryesore janë izolimi i mirë i zërit dhe përçueshmëria e reduktuar termike; Disavantazhi është se është më pak rezistent ndaj lagështirës se tulla e kuqe dhe është mjaft e rëndë.
Tulla rërë-gëlqere dallohet lehtësisht nga nuanca e saj e bardhë e çimentos
Kërkesat për cilësinë, madhësinë dhe pamjen e tullave rërë-gëlqere janë të ngjashme me kërkesat për tulla qeramike dhe përcaktohen në GOST 379-95 "Tulla dhe gurë silikate. Specifikimet».
Tulla rërë-gëlqere nuk është aq e gjithanshme sa tulla qeramike; ajo nuk mund të përdoret në themele, bazamente, vatra zjarri, soba dhe struktura të tjera kritike.
Bërë nga një përzierje e veçantë e gurit gëlqeror, çimentos dhe ngjyrave të veçanta; është një shufër me formë korrekte dhe me ngjyrë ideale, e cila përdoret për përfundimin dhe përballimin e punimeve. Veçanërisht e njohur është tulla me një strukturë heterogjene, e cila bën të mundur stilizimin e veshjes së fasadave për t'i ngjasuar gurit "të rreckosur".
Llojet e tullave sipas qëllimit të përdorimit
Tulla e zakonshme
Ky është një material ndërtimi standard (quhet tulla standarde, ose mur, e kuqe, mbushje, balte, tulla pune), e cila përdoret për ndërtimin e themeleve dhe strukturave mbajtëse. Mund të lyhet dhe suvatohet lehtësisht, ndaj nuk kërkohet të ketë cilësi të larta estetike, ndaj plasaritjet dhe gërvishtjet nuk janë shenjë e gurit me cilësi të dobët.
Tulla përballë
Tulla e ballafaqimit (veshja, përfundimi, fasada) përdoret vetëm për përfundimin e sipërfaqes. Kërkesat për cilësitë e tij estetike janë të larta: devijimet në madhësi lejohen jo më shumë se 4 mm në gjatësi, 3 mm në gjerësi dhe trashësi; Ngjyrosja duhet të jetë uniforme dhe të mos ketë defekte të jashtme.
Ka dy lloje përballë tullave: me teksturë, me sipërfaqe relievi dhe me formë, që përdoret për mbarimin e pjesëve dekorative të një ndërtese, dritareve dhe hapjeve të harkuara, kornizave.
Balta e zjarrit ose tulla rezistente ndaj zjarrit është e destinuar për përfundimin e sobave dhe vatrave të zjarrit dhe është lehtësisht e dallueshme nga ngjyra e saj karakteristike e rërës (e verdhë). Është i lëmuar, i barabartë, ka densitet të mirë, është rezistent ndaj nxehtësisë së fortë dhe mund të përballojë temperaturat deri në 1600 ° C. Kombinohet në mënyrë perfekte me çdo stil të brendshëm.
Tulla klinker
Tulla klinker, një material ndërtimi qeramik i bërë nga balta duke djegur lëndët e para deri në sinterim të plotë, është jashtëzakonisht e fortë dhe e qëndrueshme dhe ka rezistencë shumë të lartë ndaj konsumit. Praktikisht nuk ka kufizime në cilësi dhe ngjyra, mund të imitojë një sipërfaqe antike dhe të ruajë efektin e ndezjes, gjë që e bën atë jashtëzakonisht estetik dhe të kërkuar në fusha të ndryshme ndërtimi.
Në jetën e përditshme, fjala "klinker" i referohet gjithashtu pllakave të tullave me rezistencë të lartë dhe pllakave të shtrimit.
Karakteristikat e tullave
Madhësia dhe pesha e tullave
Ekzistojnë tre madhësi standarde në ndërtim:
- Tulla e vetme (rresht i vetëm) - 250 x 120 x 65 mm, pesha 2–2,3 kg
- Një tullë e gjysmë (e trashur) - 250 x 120 x 88 mm, pesha 3–3,2 kg
- Tulla dyshe (2NF) - 250 x 120 x 138 mm, pesha 4,8–5 kg
Madhësitë jo standarde të tullave mund të përdoren për përfundimin ose restaurimin.
Forca e tullave
Karakteristika më e rëndësishme e tullave është forca, domethënë aftësia për t'i rezistuar deformimeve dhe streseve të brendshme pa u thyer. Sipas treguesit të forcës, tulla ndahet në marka, të përcaktuara me shkronjën "M" me një përcaktim numerik: tulla M-50, tulla M-75, tulla M-100, etj. Numri tregon ngarkesë e lejuar në kilogramë për centimetër katror sipas GOST 530-2007. Sa më e lartë të jetë vlera numerike e markës, aq më e fortë është tulla.
Boshllëku i tullave
Tullat qeramike vijnë në dy lloje: të ngurta dhe të zbrazëta (të çara).
Tulla e ngurtë - nuk ka zbrazëti (përmes vrimave) ose me zbrazëti jo më shumë se 13%.
Tulla e zbrazët (e çarë ose e shpuar) - ka vrima (zbrazëti) të formave dhe madhësive të ndryshme, për shkak të të cilave ka më pak peshë dhe aftësi më të madhe termoizoluese.
Përdorimi i tullave të zbrazëta në ndërtim bën të mundur zvogëlimin e ngarkesës në themel dhe zvogëlimin e trashësisë së mureve me tulla; për më tepër, tullat me vrima janë më të lira se tullat e ngurta. Megjithatë, tullat tradicionale qeramike mund të përballojnë më mirë mbingarkesat.
Rezistenca ndaj ngricave të tullave
Rezistenca e një tulle ndaj ndryshimeve të temperaturës dhe lagështisë përcaktohet nga një cilësi e tillë si rezistenca ndaj ngricave - aftësia e një materiali për t'i bërë ballë shkrirjes dhe ngrirjes së alternuar në një gjendje të ngopur me ujë. Rezistenca ndaj ngricave tregohet me shkronjën "F" me vlerë numerike dhe matet në cikle: tulla F-15, tulla F-35, tulla F-50, etj.
Shkalla e rezistencës ndaj ngricave të tullave për ndërtim dhe përfundim zgjidhet në përputhje me dokumentacionin rregullator varet nga veçoritë klimatike Rajon; Sa më i ulët të jetë indeksi i rezistencës ndaj ngricave, aq më e lirë është tulla. Ky tregues duhet të kontrollohet përpara se të blini materialin.
Përçueshmëria termike e tullave
Përçueshmëria termike është aftësia e një tullë për të përcjellë energjinë termike përmes vëllimit të saj. Përçueshmëria aktuale termike varet drejtpërdrejt nga dendësia e tullave: sa më shumë çarje dhe zbrazëtira të ketë në tullë, aq më efikase ruan nxehtësinë. Po, e rëndë dhe e qëndrueshme tulla klinker klasa M-500 ka koeficientin më të lartë të përçueshmërisë termike, dhe qeramika më pak e qëndrueshme, klasa M 75 ka më të ulëtin.
Tulla qeramike (e kuqe) është bërë nga balta me aditivë. Pas formimit dhe tharjes, një tullë e tillë pjek në një temperaturë prej rreth 1000 ° C. Gjatë pjekjes, grimcat e argjilës sinterizohen dhe tulla fiton vetitë e gurit.
Avantazhet e tullave qeramike
- siguria dhe mirëdashësia mjedisore;
- forcë e lartë mekanike (deri në 150 kg/cm2);
- rezistencë e lartë ndaj konsumit;
- rezistenca ndaj ngricave dhe rezistenca ndaj ndryshimeve të temperaturës;
- rezistenca ndaj mjediseve agresive;
- Rezistenca ndaj UV;
- padjegshmëria dhe rezistenca ndaj zjarrit;
- rezistencë relativisht e lartë ndaj lagështirës.
Aplikimi i tullave ndërtimore dhe ballore
- ndërtimi i mureve dhe ndarjeve mbajtëse dhe vetë-mbështetëse;
- duke mbushur boshllëqet strukturat monolit të betonit;
- veshja e mureve të jashtme;
- ndërtimi soba me dru dhe oxhaqe (tulla të veçanta zjarrduruese përdoren për kuti zjarri dhe grykë);
- prodhimi i formave të vogla arkitekturore.
Markat e tullave të kuqe (qeramike).
Si rregull, tulla ka një shenjë të dyfishtë - për forcë dhe rezistencë ndaj ngricave.
Shkalla e forcës përcaktohet me shkronjën M. Numri që pason këtë shkronjë është ngarkesa maksimale në kilogramë për centimetër katror që mund të përballojë tulla. Në Rusi, prodhohen tulla qeramike M-50, M-75, M-100, M-125, M-150, M-200, M-250, M-300.
Shkalla e rezistencës ndaj ngricës përcaktohet me shkronjën F. Pasohet nga një numër - ky është numri i cikleve të plota të ngrirjes dhe shkrirjes gjatë të cilave një tullë e ngopur me lagështi ruan forcën e saj. Në shitje mund të gjeni tulla qeramike me rezistencë ndaj ngricave nga F-25 në F-150.
Tulla e ngurtë dhe e zbrazët
Nuk ka zbrazëti teknologjike në tulla të ngurta. Ka forcë maksimale mekanike, por është i rëndë dhe ka një koeficient jashtëzakonisht të ulët të rezistencës termike. Përdoret për ndërtimin e strukturave që mbajnë ngarkesa të rënda.
Me tulla të zbrazëta, e kundërta është e vërtetë. Një pjesë e konsiderueshme e vëllimit të saj është e zënë nga ajri: prandaj, ruan nxehtësinë më mirë dhe peshon më pak, por është dukshëm inferior ndaj atij me trup të plotë për sa i përket forcës.
Tulla e vetme, një e gjysmë dhe e dyfishtë
Tulla është bërë më e përhapur në Rusi:
- teke - 250 x 120 x 65 mm;
- i trashë (një e gjysmë) - 250 x 120 x 88 mm;
- tulla e vetme Euro – 250 x 85 x 65;
- dyshe (gur qeramik) – 250 x 120 x 138 mm.
GOST lejon madhësi të tjera (për shembull, gjatësi 288 mm), por tulla të tilla janë shumë më pak të zakonshme.
Ndërtimi dhe ballafaqimi me tulla
Zakonisht përdoret në rreshtat e brendshëm të muraturës, si dhe në rreshtat e jashtëm nëse muratura më pas mbulohet me suva, një shtresë izolimi ose materiale të tjera. Ajo që kërkohet nga një tullë e tillë e kuqe është kryesisht forca: prandaj, GOST lejon çarje të vogla, patate të skuqura dhe defekte të tjera në të që nuk dëmtojnë vetitë e tij të performancës.
Përdoret kryesisht për përfundimin e fasadave dhe ndërtimin e strukturave dekorative. Ekzistojnë kërkesa strikte për pamjen e saj.
Kompania Stroymet ofron për të blerë tulla të kuqe ndërtimi dhe ballafaqimi në zyrat në Moskë dhe rajonin e Moskës me çmime nga prodhuesi.
Llojet dhe karakteristikat e tullave të paraqitura në tregun e Shën Petersburgut
Tulla më e zakonshme është tulla e njohur e kuqe ose qeramike, e cila prodhohet nga pjekja e argjilave dhe përzierjeve të tyre. Një tjetër 10% e tregut i përket tullave rërë-gëlqere të përftuara nga llaçi gëlqeror i ngurtësuar në autoklave.
Pavarësisht nga materiali, karakteristikat kryesore të tullave janë të njëjta. Kjo:
- Forcë- Karakteristika kryesore e tullave është aftësia e materialit për t'i rezistuar streseve dhe deformimeve të brendshme pa u shembur. Është caktuar M(markë) me përkatëse vlera dixhitale. Numrat tregojnë se çfarë ngarkese për 1 sq.cm. mund të përballojë tulla. Tullat më të zakonshme në shitje janë M100, 125, 150, 175. Për shembull, për ndërtimin e ndërtesave shumëkatëshe përdoren tulla të paktën M150 dhe për një shtëpi 2-3 kate mjaftojnë tulla M100.
- Rezistenca ndaj ngricave- tregohet aftësia e një materiali për t'i bërë ballë ngrirjes dhe shkrirjes së alternuar në një gjendje të ngopur me ujë z dhe matet në cikle. Gjatë testeve standarde, tullat zhyten në ujë për 8 orë, pastaj vendosen në ujë për 8 orë. ngrirës(ky është një cikël). Dhe kështu me radhë derisa tulla të fillojë të ndryshojë karakteristikat e saj (pesha, forca, etj.). Më pas provat ndërpriten dhe nxirret përfundimi për rezistencën ndaj ngricave të tullave. Tullat me një cikël më të ulët zakonisht janë më të lira, por karakteristikat e tyre të performancës janë zakonisht më të ulëta dhe janë të përshtatshme vetëm për gjerësi gjeografike jugore. Në klimën tonë, rekomandohet përdorimi i tullave të paktën MP3 35.
Nga dendësia e trupit tulla ndahet në zgavër Dhe plot trup. Sa më shumë zbrazëti të ketë një tullë, aq më e ngrohtë dhe më e lehtë është. Vetitë termike të një tullë mund të jepen gjithashtu nga poroziteti i vetë materialit, dhe poret e brendshme kontribuojnë në izolimin më të mirë të zërit. Zhvillimi Teknologji moderne që synojnë krijimin poroze(e ngopur me pore) tullë.
Madhësia klasike e tullave është 250x120x65 mm, quhet beqare. Kjo madhësi është e përshtatshme për muratorin dhe është shumëfish i një metri. Ka edhe tulla më të mëdha - një e gjysmë(lartësia e tij është 88 mm), gurë qeramikë me përmasa të dyfishta dhe shumë herë më të mëdha.
Ngjyra e tullave kryesisht varet nga përbërja e argjilës. Shumica e argjilave pas pjekjes marrin ngjyrë "tullë", por ka argjila që pas pjekjes bëhen të verdha, kajsi ose Ngjyra e bardhë. Nëse shtoni aditivë pigmenti në argjilë të tillë, do të merrni një tullë kafe. Tulla rërë-gëlqere, fillimisht e bardhë, ngjyroset edhe më lehtë duke i shtuar pigmente.
Le të shohim më në detaje llojet, karakteristikat dhe qëllimin e tullave.
Tulla rërë-gëlqere
Në fakt, tulla rërë-gëlqere paraqet shufra prej silikati beton i autoklavuar, që ka formën dhe madhësinë e një tulle. Ai përbëhet nga afërsisht 90% gëlqere, 10% rërë dhe një pjesë e vogël e aditivëve. Avantazhi i tij në krahasim me qeramikën është kostoja e ulët dhe aftësia për të ofruar një larmi nuancash. Disavantazhet: tulla rërë-gëlqere është e rëndë, jo shumë e qëndrueshme, jo e papërshkueshme nga uji dhe përçon lehtësisht nxehtësinë. Prandaj, është inferior ndaj tullave qeramike për sa i përket shkathtësisë së përdorimit dhe përdoret vetëm në shtrimin e mureve dhe ndarjeve, por nuk mund të përdoret në themele, bazamente, soba, vatra zjarri, tuba dhe struktura të tjera kritike.
Vetitë e tullave rërë-gëlqere rregullohen nga GOST 379-79 "Tulla dhe gurë silikate. Kushtet teknike”. Karakteristikat e tij kryesore:
- klasa e forcës - M125, M150;
- klasa e rezistencës ndaj ngricave - F15, F25, F35;
- përçueshmëria termike - 0,38-0,70 W/m°C.
Kërkesat për madhësinë, cilësinë, gjeometrinë dhe pamjen e tullave rërë-gëlqere janë të ngjashme me kërkesat për tulla qeramike.
Raporti i tullave silikate dhe qeramike është përkatësisht 15 dhe 85%. Prodhuesi i vetëm i tullave rërë-gëlqere në rajonin tonë është S.A "Fabrika e Pavlovsky Materiale ndërtimi» . Asortimenti modern i ndërmarrjes përbëhet nga tulla tradicionale të bardha të ngurta gëlqere me rërë dhe lloje të reja të produkteve (tulla të zbrazëta rërë-gëlqere, mur rërë gëlqereje blloqe boshe). Që nga viti 1998, kompania ka prodhuar tulla me teksturë "Antike"® (me efektin e një muri guri të një kështjelle të vjetër). Që nga viti 1999 - tulla dhe tulla të pikturuara tredimensionale me mbushës që përmirësojnë vetitë e tij izoluese të nxehtësisë. Në korrik 2003, Pavlovsky SM Plant CJSC prodhoi grupin e parë të tullave të zbrazëta silikate. Ndër avantazhet kryesore të produktit të ri është pesha e produktit (falë 11 vrimave të verbëra, tulla peshon vetëm 2.5 kg) dhe përçueshmëria e ulët termike.
Shembuj të tullave moderne të gëlqeres me rërë të prodhuara nga Fabrika Pavlovsk SM:
Tulla të ngurta
Ai është i njëjti ndërtesë, e zakonshme, private- material me volum të vogël boshllëqesh (më pak se 13%). Tulla e ngurtë përdoret për vendosjen e mureve të brendshme dhe të jashtme, ngritjen e kolonave, shtyllave dhe strukturave të tjera që mbajnë ngarkesa shtesë përveç peshës së tyre. Prandaj, duhet të ketë forcë të lartë (nëse është e nevojshme, përdorni tulla M250 dhe madje edhe M300) dhe të jetë rezistente ndaj ngricave. Sipas GOST, nota maksimale për rezistencën ndaj ngricave të tullave të tilla është F50, por mund të gjeni edhe tulla të klasës F75. Forca nuk arrihet për asgjë - tulla të ngurta ka dendësia mesatare 1600-1900 kg/m³, poroziteti 8%, shkalla e rezistencës ndaj ngricës 15-50 cikle, koeficienti i përçueshmërisë termike 0,6-0,7 W/m°C, shkalla e forcës 75-300. Prandaj, muret e jashtme, të veshura plotësisht me tulla të ngurta, kërkojnë izolim shtesë. Tulla e kuqe e ngurtë e madhësisë klasike peshon nga 3.5 në 3.8 kg. Një metër kub përmban 480 tulla.
SHA prodhon më së shumti tulla ndërtimi dhe të forta "Lenstroykeramika". Kjo ndërmarrje është prodhuesi i vetëm në rajon i tullave me rezistencë të lartë të markave M250, M300, të destinuara për ndërtimin e ndërtesave të larta.
Shembuj të tullave të ngurta të prodhuara nga uzina Lenstroykeramika:
Tulla e zbrazët
Në përputhje me emrin e saj, ndryshimi kryesor midis kësaj tulle është prania zbrazëtitë e brendshme- vrima ose vrima, të cilat mund të kenë forma të ndryshme (të rrumbullakëta, katrore, drejtkëndore dhe ovale), vëllim (13-50% e vëllimit të brendshëm) dhe orientim (vertikal dhe horizontal). Prania e zbrazëtirave e bën këtë tullë më pak të qëndrueshme, më të lehtë dhe më të ngrohtë; më pak lëndë të para përdoren për prodhimin e saj. Tulla e zbrazët përdoret për vendosjen e mureve të jashtme të lehta, ndarjet, mbushjen e kornizave të ndërtesave të larta dhe shumëkatëshe dhe struktura të tjera të pa ngarkuara.
Mënyra e dytë, më e re për të siguruar butësinë dhe ngrohtësinë e tullave është porizimi. Prania e një numri më të madh të poreve të vogla në një tullë arrihet duke shtuar përfshirje të djegshme në masën e argjilës gjatë formimit të saj - torfe, kashtë të grirë imët, tallash ose qymyr, nga i cili pas pjekjes mbeten vetëm zbrazëtira të vogla në masë. Shpesh tulla e përftuar në këtë mënyrë quhet e lehtë ose super-efikase. Tulla poroze
siguron izolim më të mirë të nxehtësisë dhe zërit në krahasim me ato me vrima.Specifikimet tulla e zakonshme e zbrazët: dendësia 1000-1450 kg/m³, poroziteti 6-8%, rezistenca ndaj ngricave 6-8%, rezistenca ndaj ngricave 15-50 cikle, koeficienti i përçueshmërisë termike 0,3-0,5 W/m°C, shkalla e forcës 75-250 , ngjyra nga kafe e lehtë në të kuqe të errët.
Karakteristikat teknike të zgavrës super efikas tulla ( OJF "Qeramika"): dendësia 1100-1150 kg/m³, poroziteti 6-10%, rezistenca ndaj ngricave 15-50 cikle, koeficienti i përçueshmërisë termike 0,25-0,26 W/m°C, shkalla e forcës 50-150, nuancat e ngjyrave të kuqe.
Shembuj të tullave të zbrazëta dhe poroze të prodhuara nga uzina Lenstroykeramika dhe uzina Keramika:
Madhësia (mm): 250x120x138 |
|
Përparësitë: veti të shkëlqyera të izolimit termik, izolim i zërit, më pak peshë. Përdoret në ndërtimin e mureve të jashtme dhe të brendshme, duke rritur ndjeshëm vetitë termoizoluese të shtëpisë. Muret e jashtme prej guri poroz ngrihen më shpejt se muret e bëra me tulla të zbrazëta konvencionale dhe numri i fugave të llaçit zvogëlohet. Dendësia e tij është 30% më pak, është më e lehtë, gjë që çon në një ulje të ngarkesave në strukturën e themelit. Me një trashësi më të vogël muri prej 640 mm, qeramika poroze siguron të njëjtin efekt termoizolues si ato konvencionale Mur me tulla në 770 mm. |
Tulla përballë
Ai është i njëjti i fytyrës Dhe fasada. Qëllimi kryesor i përballimit të tullave është shtrimi i mureve të jashtëm dhe të brendshëm me kërkesa të larta në sipërfaqen e murit. Prandaj, tulla përballë ka një formë rreptësisht të rregullt dhe një sipërfaqe të lëmuar, me shkëlqim të mureve të jashtme. Plasaritjet dhe shtrembërimi i sipërfaqes nuk lejohen. Zakonisht, tulla e fasadës- i zbrazët, dhe, për këtë arsye, karakteristikat e tij termike janë mjaft të larta. Duke zgjedhur përbërjen e masave të argjilës dhe duke rregulluar kohën dhe temperaturën e pjekjes, prodhuesit marrin një gamë të gjerë ngjyrash. Këto ndryshime ngjyrash mund të mos jenë të qëllimshme, kështu që të gjitha shumën e kërkuarËshtë më e këshillueshme që të blini tulla përballë menjëherë, në një grumbull, në mënyrë që e gjithë veshja të jetë uniforme në ngjyrë.
Kostot për veshja me tulla më shumë se suvatimi, por një fasadë e tillë është dukshëm më e qëndrueshme se suvaja. Duke përdorur tulla dekorative për muret e brendshme Vëmendje e veçantë i jepet tegeleve prerëse. Madhësitë standarde tullat e ballafaqimit janë të njëjta si për tullat e zakonshme - 250x120x65 mm.
Karakteristikat teknike të tullave ballore: dendësia 1300-1450 kg/m³, poroziteti 6-14%, rezistenca ndaj ngricave 25-75 cikle, koeficienti i përçueshmërisë termike 0,3-0,5 W/m°C, shkalla e forcës 75-250, ngjyra nga e bardha në kafe. .
Shembuj të tullave të ballafaqimit:
Tulla me fytyrë të kuqe (bima Pobeda) |
|
Madhësia (mm): 250x120x65 |
|
Projektuar për muraturë dhe veshje të njëkohshme të mureve të jashtme dhe të brendshme të ndërtesave dhe strukturave të çdo numri katesh. Vetitë e forcës së tullave përballuese lejojnë që ajo të përdoret jo vetëm si material dekorativ, por edhe si material mbajtës së bashku me tulla të zakonshme. |
Madhësia (mm): 250x85x65 |
|
Euroformat- Kjo standard modern madhësia e tullave, e cila bën të mundur mishërimin e standardit evropian të efikasitetit, estetikës dhe modernitetit në realitetin rus. Përdoret për punë të jashtme dhe të brendshme. Euroformat është më i lehtë se tulla e zakonshme, gjë që lejon kursimin në ndërtimin e themeleve, duke e bërë më të lehtë dhe më të shpejtë punën e muratorëve. |
Tulla me ngjyra dhe me figura
Është një lloj i veçantë tulla e fytyrës i cili ka nevojë për një promovim efekt dekorativ i jepet një formë e veçantë, reliev sipërfaqësor ose ngjyrë e veçantë. Relievi mund të jetë thjesht i përsëritur, ose mund të trajtohet si "mermer", "dru", "antik" (me teksturë me skaje të konsumuara ose qëllimisht të pabarabarta). Tulla në formëkaçurrela, që flet vetë. Karakteristikat dalluese të tullave me figura janë qoshet dhe skajet e rrumbullakosura, skajet e pjerrëta ose të lakuara. Nga elementë të tillë ndërtohen pa ndonjë vështirësi të veçantë harqet, kolonat e rrumbullakëta dhe dekorimi i fasadës. e quajnë ndryshe
Ndër sipërmarrjet e rajonit tonë në fushën e tullave me ngjyra dhe formë, palma ndahet sërish nga OJF Keramika dhe "Victory Knauf". Vitin e kaluar, kjo e fundit filloi prodhimin e tullave të ngulitura (tulla të lyera 3-dimensionale që janë rezistente ndaj llojeve të ndryshme të ndikimeve) në një gamë të zgjeruar ngjyrash.
Tulla e zbrazët me fytyrë qeramike, me ngjyrë dhe kafe
Tulla krem për fytyrën, e lyer me trup (bima Pobeda) |
|
Madhësia (mm): 250x120x65 |
|
Kremi është ngjyra origjinale dhe ngrohtësia e bojrave të buta krem. Tulla krem është menduar për veshjen e mureve të jashtme dhe të brendshme. |
Tulla me fytyrë të bardhë me sipërfaqe të teksturuar (bimë Pobeda) |
|
Madhësia (mm): 250x120x65 |
|
Tullë me fytyrë kashte, me sipërfaqe teksturuese (bimë Keramika) |
|
Madhësia (mm): 250x120x65 |
|
Projektuar për veshjen e mureve të jashtme të ndërtesave dhe strukturave të çdo numri katesh. Teknologjia e prodhimit na lejon të arrijmë ngjyrë uniforme. |
Tulla me fytyrë me ngjyrë me sipërfaqe të teksturuar (bimë Keramika) |
|
Madhësia (mm): 250x120x65 |
|
Projektuar për veshjen e mureve të jashtme të ndërtesave dhe strukturave të çdo numri katesh. Teknologjia e prodhimit na lejon të arrijmë ngjyrë uniforme. Ngjyra rozë, gri, jeshile e lehtë, jeshile, e verdhë, blu, blu |
Tulla përballë me një sipërfaqe reliev "Reed", e kuqe (bimë Keramika) |
|
Madhësia (mm): 250x120x65 |
|
Perdoret per punime fasade dhe te brendshme. Sipërfaqja e përparme e tullave i ngjan strukturës së kërcellit të kallamit dhe ju lejon të pasuroni muraturën qeramike me prekje dekorative dhe t'i jepni ekspresivitet piktoresk. |
Tulla ballore me sipërfaqe relievi “Lëvorja e lisit”, e kuqe (bima Keramika) |
|
Madhësia (mm): 250x120x65 |
|
Përdoret për punë të jashtme dhe të brendshme. Cilësia e sipërfaqes së tullave i ngjan lëvores së një peme, e cila përcakton ekspresivitetin dhe atraktivitetin e këtij materiali. |
Madhësia (mm): 250x120x65 |
|
Tulla me figura- Kjo material origjinal për dekorimin e shtëpisë, duke ju lejuar të personalizoni çdo strukturë. Përdorimi i tullave me figura lejon që dikush të shmangë operacionet intensive të punës të prerjes së tullave konvencionale me fytyrë dhe u ofron arkitektëve mundësi të shumta për të krijuar individuale elementet arkitekturore fasadat: rrumbullakimet dhe kornizat e dritareve dhe portat e dyerve, ndërtim harqesh dhe kolonash |
Tulla madhësive të mëdha
GOST e përcakton atë si gur qeramik. Guri standard qeramik, ose tulla e dyfishtë(siç e quajnë shpesh shitësit) - ka dimensione 250x120x138 mm. Avantazhi i gurëve qeramikë është prodhimi dhe efikasiteti i tyre. Tulla të mëdha mund të shpejtojnë dhe thjeshtojnë ndjeshëm procesin e shtrimit. Arritja më e lartë në prodhimin e tullave të tilla në vendin tonë ishin produktet e uzinës "Fitorja e LSR", e cila ka zotëruar prodhimin e blloqeve të lehta dhe shumë të mëdha nën markën RAUF.
Produkte të tilla kanë ardhur shumë larg nga tulla më e thjeshtë, e cila dikur ishte skalitur me dorë. Njësitë e uzinës Pobeda LSR edhe për syrin duken si produkte shumë të teknologjisë së lartë.
Shembuj të blloqeve qeramike të prodhuara nga shoqata Pobeda LSR
Madhësia (mm): 250x120x138 * në varësi të markës së gurit |
|
Përdoret në ndërtimin e mureve të jashtme dhe të brendshme, duke rritur ndjeshëm vetitë termoizoluese të shtëpisë. Përparësitë: vetitë e shkëlqyera të izolimit termik, izolimi i zërit. Muret e jashtme prej guri poroz ngrihen më shpejt se muret e bëra me tulla të zbrazëta konvencionale dhe numri i fugave të llaçit zvogëlohet. Dendësia e tij është 30% më pak, është më e lehtë, gjë që çon në një ulje të ngarkesave në strukturën e themelit. Me një trashësi muri prej 640 mm, qeramika poroze siguron të njëjtin efekt izolues termik si një mur konvencional me tulla prej 770 mm. |
Madhësia (mm): 250x250x138 |
|
Përdoret në ndërtimin e mureve të jashtme. Përdorimi i këtij guri ju lejon të zvogëloni ngarkesën në themel, të rrisni shpejtësinë e muraturës dhe të zvogëloni konsumin e llaçit. Tulla poroze është më e lehtë se tulla e zakonshme, ka densitet të ulët dhe përçueshmëri të ulët termike. Ka veti të shkëlqyera termoizoluese. Duke zbutur ndryshimet e temperaturës, krijon një mikroklimë të rehatshme në shtëpi. Përdorimi i tij në murature rrit produktivitetin e punës dhe ndihmon në uljen e humbjes së nxehtësisë. |
Madhësia (mm): 380x253x219 Pesha (kg): 17 Dendësia (kg/m³): 800 Markë: M75, M100 Rezistenca ndaj ngricave: F50 Thithja e ujit (%): 11 Përçueshmëria termike (W/m°C) |
|
Vepron si një element shtesë në ndërtimin e mureve të jashtme dhe të brendshme të bëra nga qeramika e ngrohtë. Një bllok poroz është më i lehtë se ai i rregullt, ka densitet të ulët dhe përçueshmëri të ulët termike. Për shkak të vetive të shkëlqyera të izolimit termik, ndryshimet e temperaturës në shtëpi zbuten. Kostot e transportit, prodhimit dhe teknologjisë janë ulur ndjeshëm, dhe koha e shpenzuar për muraturë zvogëlohet me 2-2,5 herë. |
Madhësia (mm): 398х253х219 Pesha (kg): 17,7 Dendësia (kg/m³): 800 Markë: M75, M100 Rezistenca ndaj ngricave: F50 Thithja e ujit (%): 11 Përçueshmëria termike (W/m°C) |
|
Vepron si një element shtesë gjatë ndërtimit të mureve nga qeramika e ngrohtë. Një bllok poroz është më i lehtë se ai i rregullt, gjë që zvogëlon ngarkesën në themel. Ka densitet të ulët dhe përçueshmëri të ulët termike. Për shkak të vetive të shkëlqyera izoluese termike, zbut ndryshimet e temperaturës në shtëpi. Kostot e transportit, prodhimit dhe teknologjisë janë ulur ndjeshëm, dhe koha e shpenzuar për muraturë zvogëlohet me 2-2,5 herë. |
Madhësia (mm): 510x253x219 |
|
Është materiali kryesor për ndërtimin e mureve të shtëpive të bëra nga qeramika e ngrohtë në ndërtimet e banesave të ulëta. Një bllok poroz është më i lehtë se ai i rregullt, gjë që zvogëlon ngarkesën në themel, ka densitet të ulët dhe përçueshmëri të ulët termike. Për shkak të vetive të shkëlqyera izoluese termike, zbut ndryshimet e temperaturës në shtëpi. Kostot e transportit, prodhimit dhe teknologjisë janë ulur ndjeshëm, dhe koha e shpenzuar për muraturë zvogëlohet me 2-2,5 herë. |
Tulla klinker
Tulla klinker përdoret për veshjen e bazamenteve, shtrimin e rrugëve, rrugëve, oborreve dhe veshjen e fasadave. Kjo e fundit mund të vërehet veçanërisht - një përfundim i tillë për një kohë të gjatë nuk ka nevojë për riparime, papastërtia dhe pluhuri praktikisht nuk depërtojnë në strukturën e sipërfaqes, dhe ka më shumë se mjaft variacione ngjyrash dhe formash. Ndër disavantazhet e klinkerit janë rritja e përçueshmërisë termike dhe kostoja e lartë. Dendësia e klinkerit 1900-2100 kg/m³, poroziteti deri në 5%, shkalla e rezistencës ndaj ngricës 50-100, koeficienti i përçueshmërisë termike 1.16, shkalla e forcës 400-1000, ngjyra - nga e verdha në të kuqe të errët.
Tulla e klinkerit shtypet nga argjila e kuqe e thatë dhe pjek para shkrirjes në temperatura dukshëm më të larta se sa është e zakonshme për prodhimin e tullave konvencionale. tulla ndërtimi. Kjo siguron densitet të lartë dhe rezistencë ndaj konsumit të klinkerit.
Tulla prej zjarri
Për të shmangur shkatërrimin e shpejtë të muraturës në kontakt me zjarrin e hapur, keni nevojë për një tullë që mund të përballojë temperaturat e larta. Ai quhet sobë, i papërshkueshëm nga zjarri Dhe balta e zjarrit. Tulla e zjarrit mund të përballojë temperaturat mbi 1600°C. Dendësia e tij është 1700-1900 kg/m³, poroziteti 8%, shkalla e rezistencës ndaj ngricave 15-50, koeficienti i përçueshmërisë termike 0,6 W/m°C, shkalla e forcës 75-250, ngjyra nga e verdha e lehtë në të kuqe të errët. Tullat e zjarrit janë bërë në forma klasike, si dhe trapezoidale, në formë pyke dhe të harkuara. Një tullë e tillë është bërë nga balta e zjarrit - balta rezistente ndaj zjarrit.
Artikull nga faqja library.stroit.ru