Një nga burimet e zjarreve në banesat dhe shërbimet komunale dhe ndërtesat kulturore, arsimore, zyra dhe administrative janë rrjetet elektrike.
Aktualisht, markat më të zakonshme të telave elektrikë në sektorin e banesave dhe shërbimeve komunale për furnizimin me energji elektrike të konsumatorëve janë: kabllo me izolim PVC(Tabela 1)
Markë | Seksioni, mm2 | Numri i bërthamave | Specifikimet |
Rimbyllje automatike | 2,5. ..120 | 1 | Tel me bërthamë alumini dhe izolim PVC | APPV | 2,5...6 | 2; 3 | Tel me berthame alumini, izolim PVC, i sheshte |
AVVG | 2,5...50 | 1; 2; 3; 4 | Kabllo energjie me bërthama alumini, izolim PVC, këllëf PVC |
AVRG | 2,2...30 | 2; 3; 4 | Kabllo energjie me bërthama alumini, izolim gome, këllëf PVC |
APVG | 2,5...50 | 1; 2; 3;4 | Kabllo energjie me bërthama alumini, izolim polietileni, këllëf PVC |
VRG | 1 ...240 | 1; 2; 3,4 | Kabllo energjie me bërthama bakri, izolim PVC, këllëf PVC |
PVG | 1,5...50 | 1; 2; 3; 4 | Kordoni fleksibël me bërthama të përdredhura dhe izolim PVC |
ShPS | 0,5...0,75 | 2; 3 | Kordoni i bllokuar, i izoluar nga PVC, i veshur me PVC, i varur |
Tabela 1
Karakteristikat e shkurtra të vetive fizike dhe mekanike të polivinilklorurit
Klorid polyvinyl ( PVC) është një polimer termoplastik që është i ngurtë në temperatura të zakonshme dhe amorf, d.m.th. një strukturë pa formë në të cilën vetitë e saj (mekanike, elektrike, etj.) në kushte natyrore janë të njëjta në të gjitha drejtimet.
Vetitë izoluese elektrike të PVC janë relativisht të ulëta (26...28 MV/m). Megjithatë, për shkak të një numri të karakteristika pozitive(rezistenca ndaj acideve, alkaleve dhe tretësirave të kripës) U gjet PVC aplikim të gjerë si izolues, në veçanti, kur izoloni telat dhe kabllot elektrike.
Temperatura afatgjatë e funksionimit të PVC është 80 ... 90 ° C. Mbi 1-40 ° C, PVC fillon të dekompozohet me lëshimin e klorurit të hidrogjenit. Në të njëjtën kohë, vetitë fizike dhe mekanike të PVC përkeqësohen: vëllimi rezistenca elektrike dhe forca mekanike (zgjatja relative në thyerje zvogëlohet dhe brishtësia rritet). Kloruri i hidrogjenit i lëshuar ka një efekt të dëmshëm te njerëzit (veçanërisht gjatë zjarreve) dhe shkakton korrozion të materialeve që ndodhen aty pranë. Në temperatura të ngritura, PVC digjet, por nuk mbështet djegien. Temperatura e vetëndezjes së PVC është 454...495°C. Kur PVC digjet, formohet tym i trashë dhe i dendur dhe lëshohet një sasi e madhe nxehtësie. Vlera kalorifike e izolimit PVC është 5949 kcal/kg. Për krahasim, mund të japim të dhëna për vlerën kalorifike të drurit, në veçanti të dushkut, - 2500 kcal/kg. Kjo do të thotë se kur digjet 1 kg izolim PVC, lirohet 2.4 herë më shumë nxehtësi sesa nga druri me kalori të lartë.
Një përkeqësim i dukshëm i vetive të PVC vërehet kur ekspozohet ndaj dritës, kryesisht për shkak të rrezatimit ultravjollcë. Për të mbrojtur PVC nga ekspozimi ndaj dritës, i shtohen lloje të ndryshme pigmentesh (blozë, dioksid titani, etj.), të cilat, duke qenë një ekran, thithin rrezatimin ultravjollcë.
Shkaqet kryesore të dëmtimit të izolimit PVC
Shkaqet kryesore të dëmtimit të izolimit të instalimeve elektrike dhe kabllove PVC përfshijnë:
defekte në prodhim;
dëmtim mekanik;
plakja natyrale e izolimit gjatë funksionimit;
ekspozimi ndaj dritës;
mbingarkesa aktuale e telave;
ekspozimi ndaj një mjedisi agresiv.
Defektet e fabrikës në izolimin PVC shoqërohen kryesisht me një ulje të përmbajtjes së plastifikuesit në përbërjen plastike të polivinilklorurit. Kështu, sipas të dhënave, ulja e plastifikuesit në përbërjen plastike IRM-40 në 20 pjesë në masë çon në formimin e çarjeve në izolim në një temperaturë prej -15°C gjatë lakimit të instalimit të telave.
Mbrapa vitet e fundit kur vendosni instalime elektrike të fshehura brenda ndërtesat e banimit kabllot e energjisë shtruar në fleksibël të veçantë tuba të valëzuar, duke pasur një nivel të lartë të rezistencës izoluese (të paktën 100 MOhm dhe 500 V për 1 min) dhe rezistencë ndaj zjarrit (aftësia për t'u ndezur në një temperaturë prej të paktën 650 ° C). Fatkeqësisht, disa prodhues ukrainas shkelin qëllimisht teknologjinë e prodhimit të këtyre produkteve, duke prodhuar tuba nga materiale të ricikluara, duke ndryshuar karakteristikat fizike të produktit. Sipas të dhënave, kjo çon në rritjen e brishtësisë së materialit dhe humbjen e forcës gjatë ndryshimeve të temperaturës, gjë që, natyrisht, ndikon negativisht në qëndrueshmërinë dhe funksionimin e sigurt rrjetet elektrike.
Dëmtimi mekanik i izolimit ndodh kryesisht gjatë transportit dhe ruajtjes së pakujdesshme të produkteve kabllore dhe instalimit të instalimeve elektrike (veçanërisht në kthesat kur vendosen nëpër mure dhe ndarje të brendshme).
Sipas mendimit tonë, plakja e izolimit gjatë funksionimit afatgjatë është shkaku kryesor i zjarreve. Procesi themelor që çon në plakjen e izolimit është heqja (humbja) natyrale e plastifikuesit nga plastika PVC. Performanca e mëtejshme e izolimit të telit elektrik varet nga kjo.
Ndërsa izolimi PVC plaket, vërehet një rënie në rezistencën ndaj të ftohtit të kabllove dhe telave, gjë që mund të tregojë një dështim të funksionimit të tyre. Në rast stresi mekanik në instalime elektrike ose kabllo kur temperaturat e ulëta(-1 5°C ose më pak) vërehet çarje e izolimit. Përveç kësaj, gjatë funksionimit afatgjatë të telave elektrikë, vërehet një ndryshim në dimensionet gjeometrike të izolimit, kryesisht një rënie në diametrin e jashtëm. Studimet kanë treguar se çfarë ndodh gjatë plakjes Izolimi PVC humbja e plastifikuesit shoqërohet me një rritje të densitetit dhe tkurrje të izolimit. Natyrisht, matja e diametrit të jashtëm të instalimeve elektrike gjatë funksionimit në kushte të caktuara mund të shërbejë si një tregues për diagnostikimin e izolimit PVC.
Efekti i dritës në izolim mund të shpjegohet me depërtimin e rrezeve ultravjollcë në trashësinë e polimerit PVC termoplastik. Hulumtimi i autorit tregon se në mungesë të ekspozimit të dritës ndaj telave elektrikë, zgjatja relative dhe forca e izolimit PVC zvogëlohet pak. Nuk ka dallim të dukshëm në karakteristikat mekanike të izolimit të pigmentuar me ngjyra të ndryshme. Më efektive për sa i përket qëndrueshmërisë optike është Ngjyra blu, më së paku - e kuqe dhe e natyrshme. Pigmentimi i izolimit në ngjyra të ndryshme që i nënshtrohet plakjes atmosferike (on jashtë), e mbron nga plakja shkatërruese për jo më shumë se 2...2,5 vjet. Kur ekspozohet ndaj kushteve atmosferike, plasaritja në mikrostrukturën e materialit ndodh intensivisht. Jo vetëm numri i çarjeve po rritet, por edhe madhësia e tyre. Intensiteti i rrezatimit diellor zvogëlohet nga sipërfaqja e jashtme në atë të brendshme. E gjithë kjo çon në një rënie në mekanike dhe karakteristikat elektrike izolim. Kështu, mund të konkludojmë se vendosja e instalimeve elektrike hapur në ajër është e padëshirueshme. Dhe nëse kjo nuk mund të shmanget, atëherë instalimet elektrike dhe kabllot e energjisë duhet të vendosen në tuba (metal, të lëmuar ose të valëzuar nga plastifikuesi).
Mbingarkesa aktuale në telat e rrjetit elektrik mund të ndodhë kryesisht në dy raste të mundshme të shpeshta: gjatë një qarku të shkurtër për shkak të kontaktit të ngushtë të telave të fazës dhe neutralit të ekspozuar për çfarëdo arsye dhe gjatë dëmtimit mekanik, madje edhe të vogël të izolimit ose për shkak të plakjen e saj.
Në rastin e parë, si rezultat i një qarku të shkurtër të drejtpërdrejtë, rrjeti elektrik mbrohet nga pajisja mbyllje mbrojtëse(sigurisht, nëse funksionon në mënyrë të besueshme). Mundësia e zjarreve në raste të tilla është, si rregull, e pamundur (natyrisht, nëse nuk ka objekte të ndezshme në vendin e qarkut të shkurtër). Në rastin e dytë, procesi i zhvillimit të mbingarkesës aktuale ndodh gradualisht. Dhe kjo është shumë e rrezikshme, pasi pajisja e mbylljes mbrojtëse mund të mos reagojë menjëherë (ose edhe të mos ketë kohë për ta bërë këtë fare) ndaj një mbingarkese aktuale.
Shënim. Ngrohja e lejuar e përcjellësit nuk është më shumë se 55°C. Në rastet e ngarkesave aktive, është e nevojshme të përdoret një bërthamë neutrale e të njëjtit seksion kryq ose një kabllo simetrike me 4 tela.
Tabela 2
Vëzhgimet kanë vërtetuar se edhe dëmtimi mikroskopik i izolimit shkakton një rrymë rrjedhjeje në pikë dhe ngrohje lokale të izolimit. Me kalimin e kohës, pluhuri dhe llojet e tjera të papastërtive grumbullohen midis përçuesve që kanë dëmtime mekanike të izolimit dhe insektet vendosen në një vend të izoluar nga rrymat e rrjedhjes. E gjithë kjo, kur njomet, bëhet një medium përçues elektrik. Në funksionimin e mëvonshëm të instalimeve elektrike, lind një qark elektrik midis telave fazor dhe neutral: së pari, izolimi karbonizohet në pikën e dëmtimit, rritet rryma e rrjedhjes dhe temperatura e qarkut, gjë që përfundimisht çon së pari në një lokal ndezja e izolimit, shfaqja e një harku të qëndrueshëm dhe një zjarri.
Në këtë drejtim, është e pamundur të mos vërehen rastet e zjarreve kur rrjeti elektrik është i mbingarkuar për faktin se në vend të lidhjeve të siguresave të kalibruara, "gabimet" famëkeqe me seksione tërthore që tejkalojnë ndjeshëm seksionet kryq të futjeve të kalibruar janë instaluar në siguresat. Në këtë rast, kur rrjeti elektrik mbingarkohet, izolimi ndizet dhe zjarri bëhet i pashmangshëm. Është vërtetuar eksperimentalisht se një rrymë prej 300 mA çliron energji që është e pamjaftueshme për të ndezur standardin Materiale ndërtimi. Prandaj, një pajisje e rrymës së mbetur me këtë rrymë rrjedhjeje të vlerësuar është mjete efektive mbrojtje nga zjarri, veçanërisht në vendet ku ruhen materiale të ndezshme.
Diametri i bërthamës | Fuqia e përafërt |
||||
venat | dirigjent | konsumatori i energjisë elektrike |
|||
dirigjent. | duke përjashtuar | Alumini |
|||
mm | izolim. | ||||
mm | dirigjent | dirigjent |
|||
Ekspozimi ndaj një mjedisi agresiv. Kjo mund të përfshijë:
lagështimi i telave;
mbinxehja e telave nga burime të jashtme të nxehtësisë;
veprimet e brejtësve;
ngopja e ajrit të brendshëm me gazra toksikë etj.
Lagja e izolimit ndodh kur vendosni instalime elektrike në dhoma kur shkelen kërkesat e PUE, të cilat përcaktojnë që kur kaloni telat ose funksiononi paralelisht, për shembull, me gypat e ujit, distanca midis tyre duhet të jetë së paku 50 mm. Autori i artikullit ka analizuar tashmë shkakun e aksidentit, kur, si rezultat i kondensimit të vazhdueshëm në sipërfaqe tub uji Izolimi PVC i telit që prek tubin është përkeqësuar gjatë përdorimit afatgjatë dhe ka pushuar së ofruari rezistencë ndaj rryme elektrike.
Kur vendosni telat elektrikë pranë burimeve të jashtme të nxehtësisë, vërehet një rënie në diametrin e jashtëm të telit me izolim PVC, gjë që përshpejton procesin e plakjes.
Dëmtimi i izolimit të telave dhe kabllove elektrike nga brejtësit vërehet në kanalet kabllore të vendosura në stabilimentet e hapura të nënstacioneve dhe në bodrumet ndërtesat e banimit.
Në dhomat me ngopje të lartë ajri me gaze toksike, si kullat e lopëve dhe, veçanërisht, derrat e shpendët, miniera etj., përdoren. metoda të veçanta vendosja e telave dhe kabllove me izolim të mbrojtur. Për shkak të shtrirjes së kufizuar të artikullit, kjo çështje nuk merret parasysh nga autori.
Rishikimi i teknologjive të reja për vendosjen dhe mbrojtjen e instalimeve elektrike dhe kabllove
Është e qartë se për të parandaluar zjarret, izolimi i instalimeve elektrike dhe kabllove të energjisë elektrike duhet të ketë një kombinim të vetive zjarrfikëse dhe, më e rëndësishmja, aftësinë për të parandaluar përhapjen e djegies, lëshimin e tymit, substancave gërryese dhe produkteve toksike. kur ekspozohet ndaj një flake të hapur.
Disa kompani të huaja prodhojnë dhe furnizojnë kabllot e energjisë me përçues bakri me një tela dhe me shumë tela (Fig. 1). Izolimi dhe mbështjellësi i jashtëm i kabllove janë bërë nga plastika PVC vetë-shuarëse dhe shumë e ndezshme. Limitet temperatura e lejuar mjedis kabllor: me instalim dhe kthesa funksionale nga -5°С deri në +50°С; subjekt i funksionimit në një gjendje fikse (stacionare) nga -30°C deri në +70°C. Kablloja rekomandohet për përdorim në furnizimin me energji elektrike dhe shpërndarjen dhe instalimet e energjisë elektrike, lidhjen e shtëpive dhe ndriçimin e rrugëve. Sforcimet maksimale të lejuara:
sistemet AC njëfazore - 1.4 kV;
sistemet trefazore me një përcjellës të tokëzuar - 1.2 kV.
Tension provë 4 kV, rrymë alternative 50 Hz.
Kabllot XLPE
Njihet një gjeneratë e re e kabllove të tensionit të ulët të bërë nga i ashtuquajturi polietileni i ndërlidhur. Veçoritë e tyre karakteristike: janë rezistente ndaj tokave agresive; më miqësore me mjedisin dhe më e besueshme në funksionim. Shkalla e dëmtimit të tyre reduktohet në minimum. Kabllot me izolim XLPE(Fig. 2) janë shumë më të besueshme dhe kërkojnë kosto më të ulëta për instalim, rindërtim dhe mirëmbajtje operative. Një nga avantazhet kryesore të kabllove me izolim polietileni të ndërlidhur është prodhimi i tyre i lartë për shkak të rritjes së temperaturës së lejuar të bërthamës.Rrymat shtesë të ngarkesës, në varësi të kushteve të instalimit, janë 15...30% më të mëdha se ato të kabllove me izolim letre. Kjo arrihet duke rritur temperaturën e funksionimit të bërthamave në 90°C (në vend të 70°C) dhe rrymën e lartë të stabilitetit termik gjatë një qarku të shkurtër në rrjetin elektrik.
Kablloja shquhet gjithashtu për rezistencën e lartë ndaj lagështirës, e cila nuk kërkon përdorimin e një këllëfi metalik. Megjithatë, gjatë futjes në prodhim të këtyre kabllove duhet të merret parasysh edhe mendimi dhe shqetësimet e disa ekspertëve vendas në fushën e produkteve kabllore në lidhje me sigurinë nga zjarri të kabllove të tillë. kërkojnë certifikata nga furnitorët për cilësinë e tyre.
Tuba mbrojtës dhe sisteme shtrimi
Një rol të rëndësishëm në sigurimin e funksionimit të sigurt dhe afatgjatë të telave dhe kabllove elektrike me izolim PVC luan tuba mbrojtës(metal dhe plastikë). Pra, rekomandohet plastike, e lëmuar, e fortë dhe e valëzuar tuba fleksibël bërë nga materiali PVC, i projektuar për lehtësinë e vendosjes së fuqisë dhe sinjalit rrjetet elektrike brenda dhe jashtë. Përparësitë kryesore të materialit të tubave të tillë (Fig. 3) është se ai nuk mbështet djegien, shkalla e tij e mbrojtjes është IP65. Temperatura e montimit -5...+60°С, temperatura e funksionimit -25...+60°С, shkrirja +650°С. Rezistenca e izolimit më shumë se 100 MOhm.
Vendosja e telave dhe kabllove elektrike në tubat plastikë i mbron ato nga pluhuri, ndotja, rrezatimi ultravjollcë dhe stresi mekanik. Tubat kanë kaluar me sukses testet e certifikimit në laboratorët vendas shtetërorë dhe janë në përputhje me pikën 2.1. GOST 12.1.044-89 sipas grupit të ndezshmërisë si "i ndezshëm i rëndë"
Si përfundim, mund të theksohet se për të siguruar funksionim pa probleme dhe afatgjatë, është e nevojshme të kryhen, në përputhje me kërkesat e PUE, teste të detyrueshme parandaluese gjithëpërfshirëse të rrjeteve elektrike dhe pajisjeve elektrike në kohë. mënyra, në veçanti, matjen e rezistencës së izolimit të instalimeve elektrike dhe ndriçimit, kontrollimin e vlerave të rrymave të qarkut të shkurtër të lakut të fazës zero, testimin e pajisjeve mbrojtëse, si dhe matjen e rezistencës së përçuesve dhe pajisjeve kryesore të tokëzimit linjat e tokëzimit.
Ne gjithashtu mund të rekomandojmë monitorimin termik të gjendjes termike të pajisjeve elektrike, i cili është bërë i përhapur vitet e fundit. Përdorimi i kësaj metode kontrolli bën të mundur zbulimin e defekteve në izolimin e telave dhe kabllove me temperatura të ngritura në vendet e dëmtimit në fazën më të hershme të shfaqjes së tyre, si dhe parashikimin e shkallës së zhvillimit të tij të mëvonshëm dhe zhvillimin e rekomandimeve për eliminimin defekte të tilla.
Si të izoloni telat? Kjo pyetje doli në mënyrë të pashmangshme përpara secilit prej nesh, pavarësisht nëse jemi të lidhur me energjinë apo jo. Kordoni zgjatues i dikujt ishte i prishur, dikush nguli pa sukses një gozhdë në mur, teli i dikujt thjesht u thye përgjatë izolimit. Secili prej këtyre lëndimeve kërkon vëmendje të menjëhershme, pasi vonesa mund të jetë shumë e kushtueshme.
Telat e dëmtuara mund të çojnë në goditje elektrike, ndonjëherë edhe fatale, dhe qarqet e shkurtra në instalime elektrike janë statistikisht shkaku i më shumë se 90% të zjarreve në vendin tonë. Pra, le të shohim këtë çështje.
Para së gjithash, le të kuptojmë se si, në fakt, mund të izoloni telat. Dhe në cilat raste mund të përdoret ky apo ai produkt?
Më i zakonshmi është i ashtuquajturi shirit elektrik PVC. Ky produkt është bërë nga polivinilklorur, me një ngjitës të veçantë me bazë gome të aplikuar në njërën anë. Shirit elektrik PVC mund të përdoret për të izoluar pothuajse çdo përcjellës. E vetmja pengesë e tij serioze është pika e shkrirjes, e cila në një temperaturë prej rreth 120⁰C e bën shiritin elektrik plastik dhe e bën atë të "pikojë" nga përcjellësi. Por duke pasur parasysh se shumica e telave kanë gjithashtu izolim PVC, shiriti elektrik është mjaft i aftë të përballojë të njëjtat temperatura si shumica e izolimit bazë të telit. | |
Shirit pambuku (CB) nuk ka probleme të tilla të temperaturës. Në temperatura të larta, përkundrazi, thahet dhe si një “fshikëz” mbulon vendin ku aplikohet. Por shiriti elektrik CB ka një problem tjetër. Është hidrofobik dhe për këtë arsye nuk mund të përdoret në dhoma me lagështi dhe të lagësht, si dhe në ambiente të jashtme. | |
Përveç kësaj, ka shirita izolues të bazuar në tekstil me fije qelqi, pëlhurë të zakonshme, gome silikoni, filma poliestër dhe najloni. Por ato praktikisht nuk përdoren në shtëpi, kështu që ne nuk do t'i shqyrtojmë më në detaje. | |
Në vend të dytë për nga përdorimi janë të ashtuquajturat tuba të tkurrur nga nxehtësia. Ky është një produkt i bazuar në termopolimere, i cili, kur nxehet, zvogëlon madhësinë e tij me 2 dhe ndonjëherë më shumë herë. Përdoret për izolimin e telave me seksion të vogël dhe izolimin e kabllove. E vetmja pengesë të këtij materialiështë rezistencë e dobët ndaj rrezeve ultraviolet. Prandaj, është më mirë të mos përdorni një material të tillë në rrugë. Përjashtim është tkurrja e nxehtësisë së zezë, e cila është më rezistente ndaj rrezatimit ultravjollcë. Për më tepër, udhëzimet nuk lejojnë përdorimin e tubave të tillë në temperatura mbi 135⁰C. | |
Për të izoluar kryqëzimin e telave, shpesh përdoren një shumëllojshmëri terminalesh vidhash dhe kapëse. Ato sigurojnë lidhje me cilësi të lartë të telave me njëri-tjetrin dhe izolimin e tyre. Më të zakonshmet janë terminalet me vidë, terminalet Wago, kapakët PPE, por mund të përdoren opsione të tjera. |
Llojet e dëmtimeve dhe mënyrat për t'i eliminuar ato
Epo, tani le të kuptojmë se çfarë mund të përdorni për të izoluar telat dhe në cilat situata të përdorni këtë apo atë material. Për ta bërë këtë, le të shohim llojet më të zakonshme të dëmtimit të izolimit të telit.
Gërvishtja e izolimit të telit kryesor
Një nga problemet më të zakonshme me izolimin e telit janë gërvishtjet e ndryshme, thyerjet, madje edhe kafshimet nga kafshët shtëpiake. Le të kuptojmë se si të veprojmë në secilën prej këtyre situatave.
- Le të fillojmë me problemin më të zakonshëm që mund të gjendet shpesh me kordonët zgjatues. Për shkak të përdorimit afatgjatë dhe lëvizjes së shpeshtë, ndodhin gërvishtje në izolim.
- Kordonët zgjatues janë zakonisht të izoluar dyfish, dhe fërkimi i vogël i mbështjellësit të jashtëm nuk është një problem i madh. Por nëse guaska e jashtme është madje plotësisht e konsumuar në disa vende, duhet të merren masa urgjente.
- Nëse dëmtimi i guaskës është lokal, atëherë duhet të përdoret tkurrja e nxehtësisë për të mbuluar vendin e dëmtimit. Ju gjithashtu mund të përdorni shirit elektrik, por ky opsion është më pak tërheqës estetikisht.
Jashtë dritares është viti 2015 i të ashtuquajturës “Epoka jonë” dhe çdo vit i kësaj epoke na sjell diçka të re. Gjatë dhjetë viteve të fundit, ne tashmë kemi arritur të mësohemi me faktin se çdo Viti i Ri na kënaq me pajisje të reja që përdorin të ashtuquajturën "rrymë elektrike" për funksionimin e tyre. Makinat, mekanizmat dhe pajisjet njeriu modern bëhet me permasa me te vogla, më të zgjuar dhe më të shpejtë në krahasim me ato të një shekulli më parë. Shumë gjëra të papara më parë janë shfaqur në pajisje, të cilat mund të duhen orë të tëra për t'u renditur, por me gjithë këtë, asistentët tanë të shumtë mekanikë ende përmbajnë tela, kabllo, kordona ose në terma shkencorë të veçantë, ose më mirë thënë, të vendosura veçmas - rryma e përçuesve elektrikë Në këtë tregim të shkurtër do të flasim për zhvillimin e po këtyre përçuesve, ose më saktë, për materialet e përdorura në përçues. Theksi vihet tek materialet izoluese, pasi është pikërisht kjo pjesë e përcjellësit që përcakton jetëgjatësinë, besueshmërinë dhe sigurinë e tij.Vetë koncepti dhe fjala "kabllo" ndoshta ka rrënjë gjermane, gjermanike, sepse kjo fjalë nuk shfaqet në gjuhët më të lashta. Analogu i gjermanit "Kabel" është "Teli" rus - kuptimi i kësaj fjale është më i qartë për ne, sepse lehtë mund të hamendësojmë se çfarë është "sjellja" dhe kush është "dirigjenti". Tani që kemi përcaktuar konceptet, mund të kalojmë në historinë e këtij "Teli". Ne nuk do të hyjmë thellë në histori deri në kohën e eksperimenteve me "energjinë elektrike". Ne do të kufizohemi vetëm në kohën kur u shfaq prodhimi i parë i përcjellësve në Rusi. Më 21 tetor 1832, Pavel Lvovich Shilling instaloi në Shën Petersburg, me ndihmën e mekanikut I. A. Shveikin, telegrafin e parë elektromagnetik në histori. Për të funksionuar telegrafin, nevojiteshin përçues të besueshëm të rrymës elektrike. Kablli i parë elektrik nënujor ishte një tel i hollë i mbuluar me dy shtresa izolimi, mëndafshi dhe kërpi, dhe shtresa e parë (mëndafshi) ishte e mbarsur me një përbërje të veçantë rrëshirë, mbi të cilën më pas u mbështjellë kërpi dhe gjithçka u mbars përsëri me të njëjtën përbërje rrëshinore. Kështu, mund të themi se telat e parë në Rusi, me përjashtim të bërthamës së rrymës, ishin plotësisht miqësore me mjedisin, të bëra nga produkte natyrale (mëndafshi, rrëshirë, kërp). Kabllot e para telegrafike nëntokësore u bënë afërsisht në këtë mënyrë. : telat u izoluan me një ose dy shtresa fije pambuku, të ndjekura nga impregnimi me komponime të veçanta (për shembull, dylli, sallo dhe kolofon). Predha mbrojtëse ishte qelqi, tuba të lidhur me bashkime gome ose mëngë çeliku; në disa raste, tuba xhami vendoseshin në ulluqe druri (për instalim nëntokësor). Për linjat ajrore të komunikimit dhe transmetimet e para të energjisë, u përdorën izolues të bërë nga materiale shumë miqësore me mjedisin - qelqi dhe porcelani.
Në fillim të viteve 40 të shekullit të 19-të, për shkak të nevojës për të prodhuar një numër të madh përçuesve të izoluar, u krijuan makina speciale për mbështjelljen e telave me fije. Gjatë po këtyre viteve, si materiale izoluese Filluan të përdoren goma dhe guta-perka, të cilat i ruajtën mirë vetitë e tyre në ujë. Goma ka qenë e njohur për një kohë të gjatë, por aftësia e saj për të ndryshuar shumë vetitë me ndryshime të lehta të temperaturës e pengoi përdorimin e saj për qëllime izolimi. Vetëm pas prezantimit të metodës së vullkanizimit në vitin 1939, goma fitoi vetitë që zotëronte materiali i njohur tek ne si "gome". Kështu, përdorimi i telave në kushte nëntokësore dhe masive u bë shtysë për ndërlikimin e projektimit të izolim dhe mbështjellës kabllor - ato hyjnë në përdorim materiale të tilla si qelqi dhe goma. Nëse qelqi mund të quhet ende një material miqësor ndaj mjedisit (është kimikisht rezistent, lehtësisht i riciklueshëm, jo toksik kur digjet dhe në përgjithësi njeri normal nuk mund ta vërë zjarrin), atëherë është e vështirë ta quash gomën një material të pastër. Jo vetëm që prodhimi i gomës përdor squfur, por gjatë gjithë periudhës së përdorimit të saj goma lëshon aroma të tmerrshme dhe qartësisht jo miqësore me mjedisin.Rritja e shpejtë e gjatësisë së linjave telegrafike nënujore dhe nëntokësore vendosi kërkesa gjithnjë e më serioze për përmirësimin e cilësisë së izolimit. Një hap i rëndësishëm drejt zgjidhjes së këtij problemi ishte shpikja në 1848 e një prese për aplikimin pa probleme të izolimit të gomës dhe guta-perkës në përçuesit e bakrit. Por edhe më e rëndësishme ishte krijimi i materialeve të veçanta të veshjes që do të rrisnin forcën mekanike të izolimit (në veçanti, gome dhe guta-perka) duke ruajtur fleksibilitetin dhe elasticitetin e tij. Ky problem u zgjidh me ndërtimin e një prese plumbi në 1879, me ndihmën e së cilës tel i izoluar i mbuluar me një guaskë plumbi pa tela.Në fillim të viteve 50, së pari u përftua eboniti, i përdorur në prodhimin e llojeve të ndryshme Pajisje elektrike dhe pajisje. Eboniti (nga greqishtja e lashtë "??????" - zezak) është një gomë shumë e vullkanizuar me një përmbajtje të lartë squfuri (30-50% ndaj peshës së gomës), zakonisht me ngjyrë kafe të errët ose të zezë; kimikisht inerte, ka veti të larta izoluese elektrike, megjithatë, ata që kanë ende takëm me doreza ebonit nga koha sovjetike dhe që i kanë mbinxehur aksidentalisht, duhet të kujtojnë se çfarë erë të tmerrshme lëshon eboniti kur futet në flakën e zjarrit. Në 1878, një proces inxhinier Maxim Mikhailovich Podobedov organizuar në Rusi Ishulli Vasilyevsky në qytetin e Shën Petërburgut u krijuan punishtet e para artizanale për prodhimin e përçuesve me izolim mëndafshi dhe pambuku, ku ishin të punësuar disa persona. Atje ai krijoi gjithashtu një ndërmarrje të vogël "Prodhimi rus i përçuesve elektrikë të izoluar të Podobedov, Leburde dhe Co." Në vitet '90 të shekullit të nëntëmbëdhjetë, gjithçka aplikim më të madh për kabllot e energjisë, fillon të merret izolimi letre me shumë shtresa të ngopura me vaj. Nuk mund të gjeja informacion në internet për materialin e bërthamave ose bërthamave me rrymë për përçuesit e parë në Rusi, por guxoj të supozoj se bakri dhe alumini ishin gjëra të çuditshme në atë kohë dhe çeliku duhej të ishte shumë më i lirë dhe, më e rëndësishmja, një material më i aksesueshëm dhe i përdorshëm. Në përgjithësi, sot, në fillim të shekullit të njëzet e një, materiali që përdoret më shpesh si përçues është bakri. Materiale të tjera të përdorura janë alumini, çeliku, ndonjëherë ari, argjendi dhe në raste të rralla të veçanta materialet superpërçuese. Disa materiale përdoren në përçues për qëllimin e tyre të ndryshëm (për shembull, për shpërndarjen e nxehtësisë): nikromi, konstantani dhe të tjera. Për arsye se materialet e bërthamës mbartëse të rrymës kanë mbetur të pandryshuara për më shumë se njëqind vjet (asgjë është shpikur akoma më praktik se bakri), "përparimi" kryesor, nëse mund ta quash kështu, ndodh në materialet dhe strukturën e izolimit të bërthamës dhe mbështjellësit të jashtëm të telit. Gjatë shekullit të njëzetë, kjo pjesë e telit ka ndryshuar shumë dhe, për mendimin tim, jo për mirë, duke gjykuar nga kujdesi për mjedisi Natyra jonë. Le të hedhim një vështrim më të afërt në izolimin dhe mbështjellësin e telit.
Pas një epoke eksperimentesh me mëndafsh natyral, kërp, rrëshira të ndryshme, letër speciale kabllore (izoluese elektrike), dru, qeramikë, qelq dhe madje edhe pëlhura pambuku, ka ardhur një epokë e shpërfilljes së hapur të Natyrës. Edhe gome në krahasim me disa materiale moderne mund të duket si një dele e vogël e padëmshme në sfondin e një tufe ujqërish të etur për gjak.Kryesori prej këtyre ujqërve është Poly-Vinyl-Chloride, shkurtuar si PVC në rusisht ose PVC në anglisht. Prodhimi i PVC në një shkallë të gjerë filloi në vitet '30 të shekullit të njëzetë në Gjermani; në vitin 1931, shqetësimi BASF prodhoi tonelatat e para të këtij materiali. Në të njëjtën kohë, zhvillime të suksesshme në këtë fushë u bënë në Shtetet e Bashkuara të Amerikës dhe Angli. Pas përfundimit të Luftës së Dytë Botërore, Poly Vinyl Chloride u bë materiali më i njohur për prodhimin e tubave, profileve, mbulesave të dyshemesë, filmave, izolimit të kabllove dhe shumë produkteve të tjera plastike! Zakonisht ky fakt paraqitet nga agjentët reklamues të dritareve plastike si avantazh i materialit. Kush do ta kishte menduar, por po (!), dritare plastike Ato janë bërë nga PVC! Le të mendojmë nëse ky PVC është kaq i mirë?Formula kimike e PVC është [-CH2-CHCl-]n. PVC, siç nënkupton edhe emri, përmban klor. PVC i përket grupit të termoplastikëve; PVC e pastër është një pluhur që përbëhet nga 43% etilen (produkt petrokimik) dhe 57% klor i kombinuar. Pika e shkrirjes së PVC është 150 – 220°C, megjithatë, kur nxehet mbi 135°C, në të fillojnë proceset e shkatërrimit, të shoqëruara me eliminimin e klorit atomik me formimin e mëvonshëm të klorurit të hidrogjenit, duke shkaktuar shkatërrim intensiv të makrozinxhirëve. PVC fillon të deformohet tashmë në 65 – 70 °C! Nëse hulumtoni në historinë e armëve kimike, do të gjeni faktin se armët kimike shumë shpesh përdorin klor në përbërjen e tyre. Konkluzione nëse PVC është si një bombë me sahat dhe pse vendet perëndimore janë duke promovuar në mënyrë aktive produkte PVC në të gjithë planetin, ju sugjeroj ta bëni vetë. Problemi kryesor zyrtar që lidhet me përdorimin e PVC është vështirësia e asgjësimit të tij - kur ai digjet jo plotësisht, formohen komponime organoklorin shumë toksike, p.sh. substanca helmuese fosgjen dhe dioksina, të cilat janë kancerogjene. PVC është plastika më e rrezikshme që prodhohet sot. Pavarësisht nga rreziku i tij, disa njerëz, pa e ditur për të, ngrohin dhe djegin gjërat që përmbajnë PVC. Bëje në në ambiente të mbyllura Nuk është se është jashtëzakonisht e rrezikshme - por në përgjithësi është rreptësisht e ndaluar nëse doni të jetoni! Ky artikull nuk synon të tregojë se sa gjëra të dëmshme PVC na rrethojnë në jetën e përditshme (dhe ka shumë, shumë prej tyre!), kjo artikulli fokusohet në faktin se në shumicën e telave dhe kabllove të prodhuara sot, Poli-Vinil-Klorur helmues përdoret si izolues dhe mbështjellës i telit. Nëse imagjinoni sa pajisje kanë telat elektrik, dhe që të gjitha këto tela janë bërë nga PVC, është më mirë të mos mendoni se çfarë do të ndodhë me pronarët e gjithë kësaj "pajisje me veprim të ngadaltë" kur nxehet në një temperaturë të lartë. Por me të vërtetë ngrohet shpesh. Nuk e keni vënë re? Njoftim më mirë. Si udhëzues, 60 gradë Celsius është pragu i dhimbjes për lëkurën e një personi mesatar. Nëse një tel PVC është vendosur pranë sipërfaqeve të nxehta, është më mirë ta hiqni atë nga atje ose ta zëvendësoni me një tel të bërë nga materiale të tjera, të cilat do të përmenden më poshtë. Materialet PVC promovohen në treg nën maskën e kujdesit për ne, supozohet se janë më të sigurt se të tjerët. Megjithatë, nëse shikoni llojet e kabllove, do të vini re se midis kabllove PVC ka shumë kabllo të bëra nga komponime të thjeshta plastike PVC, për të cilat nuk tregohet se është me tym të ulët ose nuk përhap zjarrin. Pra, PVC nuk është një ilaç për të gjitha sëmundjet? Rezistenca ndaj zjarrit do të ishte shumë më e lehtë për t'u siguruar me predha dhe strehë metalike, futje qeramike dhe xhami dhe shumë më tepër sesa me armë kimike në tela! Siguria nga zjarri është vetëm një justifikim, jo arsyeja e vërtetë!
Unë mendoj se ju mund të kaloni llojet ekzotike të izolimit dhe mbështjelljes si mëndafshi, sepse tani askush nuk bën tela të pastër natyral për një kohë të gjatë. Epo, mbase ndonjë xhaxha Kulibin Vasya në garazhin e tij lakuriq Tel bakri erërat shalle mëndafshi, gjë që ka shumë pak gjasa :-) Unë ju sugjeroj të zhyteni në një hulumtim të vogël të tregut të alternativave ndaj telave të dëmshëm PVC të disponueshme sot. Kam kryer një mini-hulumtim në fillim të shkurtit 2015 duke shfletuar dyqanet e njohura të shitësve me shumicë dhe pakicë të produkteve kabllore në Federatën Ruse. Teli është shumë i përshtatshëm për instalimin e pjesëve të vogla brenda pajisjeve (në tekstin e mëtejmë thjesht do t'i quaj të gjitha produktet kabllore fjalën " tel”, le të më falin teknikët, por unë jam një dashnor i gjuhës ruse) si MPM dhe MPO. Duke gjykuar nga Specifikimet teknike, ato janë mjaft të afta të zëvendësojnë një re të mbeturinave PVC në pajisjet moderne për arsyet e mëposhtme: 1. Predha izoluese është bërë nga poli-etilen (PE), do të flas për të më poshtë; 2. Disponueshmëria e ngjyrave dhe madhësive të ndryshme (që është e rëndësishme për disa koleksionistë modernë, por ishte absolutisht e parëndësishme njëqind vjet më parë) Poli-etilen (PE) nuk përmban klor, ka më të thjeshtë formula kimike nga të gjitha plastika të njohura për industrinë tonë, dhe është plastika më e sigurt e njohur sot. Po, sigurisht, kur digjet, edhe PE do të pijë kimikate të keqe, por ky kimik do të jetë shumë më pak toksik se PVC - do të keni një shans që në rast zjarri të mbarojë dhe të mos vdisni brenda disa ditësh nga helmimi, pasi ndodhi me vizitorët në klubin Lame Horse, shumica i cili vdiq jo nga djegiet, por nga helmimi nga produktet e djegies së shkumës-polistirenit (PPS).Temperatura e shkatërrimit të PE është afërsisht 80 gradë Celsius. Pika e shkrirjes është 120 gradë, më e ulët se 150 gradë për PVC, por ka një shans më të madh për të mbijetuar :-) Teli MPO ka një shtresë më të trashë izolimi në krahasim me telin MPM. Në të gjitha aspektet e tjera, këto dy tela janë të njëjtë. Megjithatë, gjetja e këtij teli në treg të hapur (për të vdekshmit e thjeshtë, jo personat juridikë me vëllime blerjesh me shumicë) dështova. Këtu janë alternativat për MPO dhe MPM që gjeta. Le të fillojmë me instalime elektrike "të dobëta", siç janë linjat telefonike. 1. Teli "TRP". Ka 2 bërthama bakri, izolim prej PE transparente ose me ngjyrë. Është mjaft i përshtatshëm për qëllime instalimi nëse keni nevojë për një sipërfaqe tërthore prej 0,4 ose 0,5 milimetra katrorë (mm katror). Nëse keni nevojë për një tel, mund ta ndani (preni) çiftin për së gjati.2. Teli "PRPPM". Ka edhe 2 bërthama, mund ta përgjysmoni sipas dëshirës. Ngjyra është vetëm e zezë. Por gjithçka është bërë nga Poli-etilen.3. Teli "P-274M" përdoret për komunikim në terren. 2 bërthama prej 0,5 sq. mm. Gjithashtu çdo gjë është bërë nga PE. Ngjyra e zezë. Secila prej dy bërthamave përmban 3 bërthama çeliku dhe 4 bërthama bakri. Më pas vjen një kabllo specifike për transmetim, por nëse nuk keni asgjë tjetër, mund të përshtatet edhe diku.4. Teli "PTPG". Dy tela, transparente, përsëri, të gjitha prej PE. Tela prej çeliku të galvanizuar. Mund të jetë i përshtatshëm edhe për ato qëllime ku është e rëndësishme një guaskë transparente.Tjetër - kabllot e energjisë, të përshtatshme për një rrjet shtëpiak me një tension të alternuar prej 220 volt.5. Teli i pistës. Një bërthamë, e zezë, PE, tension alternativ i vlerësuar - deri në 380 V.6. Teli "PRKA". Një bërthamë, tension alternativ i vlerësuar - deri në 660 V; izolim i bërë nga silikoni-organik-gome (silikoni) me fortësi të shtuar. Temperatura e funksionimit: nga -60 C° deri në +180 C° (rezistente ndaj nxehtësisë)! Një zgjedhje ideale për zëvendësim në të gjitha kabllot tona rezidenciale 220V. Dhe kushton lirë (1 metër me 1 seksion banimi prej 1,5 mm katror kushton rreth 13 rubla sot). Pse gjërat nuk u krijuan prej saj që në fillim? Gjëegjëzë...7. Teli "PVKV". Nje berthame, perseri 660 volt te alternuar, gjithashtu prej silic-organike-gome (silikoni) me fortesi te shtuar, gjithashtu rezistente ndaj nxehtesise deri ne 180 grade celcius, cmim i mire.8. Teli "RKGM". 1 bërthamë, 660 volt i alternuar, rezistent ndaj nxehtësisë (deri në +180 gradë), izolim i bërë nga gome silikoni-organik (silikoni), gërsheta (lëvozhgë e jashtme) prej tekstil me fije qelqi (!), e ngopur me llak rezistent ndaj nxehtësisë. Dhe më në fund, një tel për entuziastët e sporteve ekstreme. 9. Teli "Energoterm-400". Izolimi i bërë nga shirita rezistent ndaj nxehtësisë që përmbajnë mikë, mbështjellje me shirit xhami, deri në 660 volt të alternuar. Temperatura e funksionimit: nga -60°C në +400°C! Megjithatë, çmimi është i përshtatshëm.Pra, pas një ekskursioni të shkurtër në historinë e materialeve të lidhura me përçuesit elektrikë, mund të shohim qartë se ku dhe për shkak të kujt po shkon kjo botë. Telat e polietilenit mund të përdoren në pajisje "të lehta" ku rreziku i zjarrit është pothuajse i pamundur (për shembull, një manipulues si miu, tastiera, etj.). Pajisjet e tjera mund të përdorin izolues silikoni rezistent ndaj nxehtësisë! Edhe nëse kjo nuk është e mjaftueshme, ju mund të përmirësoni dizajnin e pajisjeve - përdorni ekrane shtesë metalike, qeramike ose xhami, predha dhe këllëf. Po, pesha e pajisjeve do të jetë padyshim më e madhe, por mirëdashësia mjedisore do të rritet ndjeshëm. Uroj që industria dhe qeveria jonë ta kuptojnë shpejt këtë dhe të kuptojnë se çfarë duhet bërë.
NË bota moderne Ka shumë mënyra për të transmetuar diçka me valë, por instalimet elektrike ende përdoren, dhe mjaft shpesh. Pra, pasi të keni lexuar artikullin, do të mësoni gjithçka që ju nevojitet për izolimin e telit.
Materialet e përdorura për izolimin e telave
Ekzistojnë dy lloje të materialeve izoluese të telit. E para është PVC, dhe e dyta është e izoluar me gome. Të dyja kanë të mirat dhe të këqijat e tyre.
Izolim PVC (polivinilklorur).
Një emër tjetër është vinyl. Ky material përdoret gjerësisht në izolimin e instalimeve elektrike, sepse Është rezistent ndaj alkalit dhe acidit, nuk lejon që rryma të kalojë përmes tij dhe gjithashtu është i pazgjidhshëm në ujë. Këto veti garantojnë mbrojtje të mirë të instalimeve elektrike nga ndikimet e jashtme.
PVC përdoret për të krijuar mbështjellësin e instalimeve elektrike dhe kabllove. Për momentin, ata madje prodhojnë shirit të veçantë PVC për izolim pjesë individuale telat.
Çmimi i izolimit PVC mund të konsiderohet një plus. Një avantazh tjetër i këtij lloji të guaskës është se polimeri nuk digjet dhe nuk reagon ndaj ndryshimeve të papritura të temperaturës.
Edhe gjatë prodhimit të këtij materiali mund t'i shtohen plastifikues. Për shkak të tyre, rezistenca ndaj alkaleve dhe acideve të ndryshme zvogëlohet, megjithatë, falë tyre, mbështjellja e telit bëhet më elastike dhe shfaqet edhe rezistenca ndaj rrezatimit ultravjollcë.
Izolimi i gomës
Shtresa e gomës përdoret në zonat industriale. Ka shumë përparësi, të cilat përfshijnë:
- Ky lloj guaskë është rezistent ndaj lagështirës.
- Izolimi i gomës ka elasticitet të konsiderueshëm.
- Nëse matni rezistencën e izolimit, mund të shihni se është mjaft e lartë.
- Kjo guaskë nuk i përgjigjet temperaturat e larta.
Në prodhimin e predhave të gomës përdoren materiale natyrale dhe artificiale dhe sintetike. Këto të fundit shërbejnë për një kohë të gjatë, janë rezistente ndaj kimikateve të ndryshme dhe temperaturave të larta nën zero.
Një avantazh tjetër i këtij materiali është elasticiteti i tij, falë të cilit mund të kryeni instalime elektrike me një mbështjellës gome kudo. Me kalimin e kohës, goma do të fillojë të plaket, duke bërë që guaska të plasaritet. Kjo do të thotë që lehtë mund të goditeni nga rryma.
Nëse guaska do të ekspozohet ndaj temperaturave të larta, rekomandohet përdorimi i gomës së vullkanizuar për izolim. Më shpesh, instalimet elektrike me këtë lloj këllëfi përdoren për shkak të elasticitetit të tij. Domethënë aty ku është e nevojshme.
Metodat e izolimit të telave
Ka disa mënyra për të izoluar telat. Sot do të flasim për ato më të zakonshmet, ka vetëm katër prej tyre:
- Izolimi duke përdorur shirit të veçantë.
- Këllëf i llojit PVC
- Mbulesa për instalime elektrike duke përdorur tubin e tkurrjes së nxehtësisë.
- Izolimi duke përdorur terminale.
Shirit special për izolim
Një emër tjetër është kaseta elektrike. Çdo shtëpi e ka atë. Nëse nuk keni shirit elektrik në fermën tuaj, nuk do të jetë e vështirë ta blini atë, sepse... është e lirë.
Zakonisht përdoret për të izoluar pjesërisht një tel. Shpesh në një vend guaska përkulet ose plasaritet vetë, për shembull për shkak të pleqërisë. Sot nuk do të flasim për mënyrën e heqjes së telave nga izolimi, por do të shqyrtojmë rastet e dëmtimit spontan të mbështjellësit të telit.
Do të doja të theksoja se është e nevojshme të mbështillni shiritin elektrik në një kënd, së pari në një drejtim dhe më pas në drejtimin tjetër. Për të kuptuar se si ta bëni këtë saktë, ia vlen të shikoni një foto të telave izolues duke përdorur shirit elektrik.
Kur nxehet shumë, shiriti do të fillojë të shkrihet, megjithëse ky disavantazh ka një plus në formën e rezistencës ndaj lagështirës. Gjithashtu, trashësia e izolimit të telit në këtë vend do të jetë më e madhe.
Ka shirit pambuku për krijimin e një këllëfi për instalime elektrike. Përkundrazi, mund të përballojë temperaturat e larta, por nuk është rezistent ndaj lagështirës.
Tub për tkurrje nga nxehtësia
Materiali nga i cili janë bërë këto tuba është polimer. Vërej se është më mirë të përdoret ky lloj guaskë në pajisjet me tension të ulët, kur voltazhi nuk është më i lartë se 1 kV.
Për të përdorur këtë metodë të krijimit të një shtrese për instalime elektrike, duhet të ndiqni disa hapa:
- Së pari ju duhet të përgatisni një pjesë të tubit të tkurrur nga nxehtësia. Për ta bërë këtë, matni pjesën e ekspozuar të telit elektrik, pasi të keni fikur energjinë elektrike. Presim një copë tubi, është më mirë nëse është pak më e madhe se sa duhet. Rreth 2-3 centimetra.
- Më pas, merrni një copë tub dhe vendoseni në fundin e njërit prej telave.
- Pas përfundimit të hapit të dytë, duhet të rrotulloni instalimet elektrike.
- Hapi i fundit është të transferoni tubin e tkurrur nga nxehtësia në kryqëzimin e instalimeve elektrike dhe të përdorni një tharëse flokësh për të siguruar rezultatin.
Pas këtyre hapave, tubi i tkurrjes së nxehtësisë do të shtypet fort kundër telit. Nëse nuk keni tharëse flokësh, do ta ketë një çakmak. Duhet të mbahet me kujdes në një distancë të vogël nga kryqëzimi i telave.
Ky lloj izolimi është më i përshtatshëm se kaseta elektrike. Gjithashtu ngjitet më mirë me instalimet elektrike. Megjithatë, nëse keni nevojë të hiqni tubin e tkurrjes së nxehtësisë, do t'ju duhet ta pastroni atë.
Ka tuba të ndryshëm. E gjitha varet nga temperaturën e dëshiruar që tubi duhet të përballojë, si dhe nga tensioni. Për të zbuluar karakteristikat e tubit, duhet të shikoni shenjat që prodhuesit vendosin në fabrikë për prodhimin e këtyre produkteve.
Ka tuba me diametra të ndryshëm, ngjyra, si dhe për seksione të caktuara kabllore. Ky plus ju lejon të zgjidhni tubin më të përshtatshëm të tkurrjes së nxehtësisë.
Izolimi i instalimeve elektrike duke përdorur terminale
Për të krijuar guaskën, përdoren terminalet - këto janë kapëse të vogla që përdoren gjerësisht, përfshirë për lidhjen e instalimeve elektrike. Terminalet mund dhe duhet të përdoren për të izoluar instalimet elektrike në një kuti kryqëzimi.
Është më mirë të mos përdorni terminale së bashku me instalime elektrike alumini me vida, sepse... Për shkak të presionit të fortë në tela, ky metal do të fillojë të rrjedhë. Një shkurtim përfundimisht mund të ndodhë për shkak të dobësimit të lidhjes dhe rritjes së rezistencës. Nëse bëni izolim duke përdorur blloqe terminale, mos harroni të inspektoni lidhjen e instalimeve elektrike të paktën një herë në vit.
Është rreptësisht e ndaluar të lidhni instalime elektrike të bëra nga materiale të tilla si bakri dhe alumini duke përdorur kthesa. Për shkak të papajtueshmërisë së këtyre metaleve, do të ndodhë të paktën një qark i shkurtër, ose më së shumti një zjarr. Kjo do të vërë jetën tuaj në rrezik.
E rëndësishme! Pas përfundimit, sigurohuni që të kontrolloni izolimin e telit.
Kështu që sot keni mësuar gjithçka që duhet të dini për izolimin e instalimeve elektrike. Ne shqyrtuam materialet dhe metodat për krijimin e një këllëf teli. Shpresoj që pasi të keni lexuar këtë artikull, keni vendosur se cili izolim teli është më i miri për ju.