Si të merrni oferta fitimprurëse nga furnitorët në Moskë
Tuba me profil katror madhësia 100x100x4 gjatësia 12 metra .
Si rregull, në fushën e ndërtimit shpesh mund të hasni në faktin se ky apo ai material është i nevojshëm tani dhe nuk ka rëndësi nëse është qyteti i Moskës apo një rajon krejtësisht i ndryshëm. Sot, për të zgjidhur këtë problem, ekziston një faqe interneti e veçantë që ndihmon klientët dhe klientët të gjejnë një bashkëpunim reciprokisht të dobishëm. Dëshironi të dini saktësisht se si ndodh kjo?
Mjaft e thjeshtë nëse përdorni Teknologjitë më të reja dhe World Wide Web. Pra, ju shkoni në faqen e internetit METAL 100.ru, lini kërkesën tuaj, le të jenë tuba të profilit katror, madhësia 100x100x4, gjatësia 12 metra, tregoni rajonin e Moskës. Megjithëse, vlen të përmendet se kërkimi juaj mund të mos kufizohet vetëm në kryeqytet. Këto mund të jenë rajone të tjera Federata Ruse, dhe me një klikim mund të mbuloni të gjitha qytetet e CIS. Në këtë pikë puna juaj pothuajse ka përfunduar, pasi sistem automatik vetë dërgon postime tek furnitorët. Dhe ata zakonisht përgjigjen brenda 3 minutave.
Pas kësaj periudhe do të filloni të merrni oferta Tuba me profil katror, madhësia 100x100x4, gjatësi 12 metra email. Informacioni do të përmbajë jo vetëm çmimet e shitjes me shumicë dhe pakicë, por edhe kohën e dorëzimit dhe kushtet e mundshme dorëzimi nëse rajoni nuk është Moska. Siç mund ta shihni, gjithçka është mjaft e thjeshtë dhe një sistem i tillë të kujton disi një tender virtual, të cilin mund ta shpallësh pa plotësuar një pirg të tërë letrash.
Tani, sigurisht, ju dëshironi të dini se cilën lidhje mund të përdorni për të paraqitur aplikacionin tuaj. Më poshtë do të gjeni adresën e saj:
Dërgoni një kërkesë tek furnitorët
Ju e kuptoni që tani e tutje keni një mundësi unike përmes së cilës mund të kurseni kohën tuaj. Harroni kërkimet e panevojshme. Në fund të fundit, tani të gjithë furnizuesit vetë do t'ju ofrojnë mallrat e tyre. Dhe ju vendosni se kujt t'i jepni përparësi. Nga rruga, faqja është gjithashtu e mirë sepse informacioni për koston e metalit të mbështjellë përditësohet çdo ditë dhe ju mund të verifikoni detyrimet e furnizuesit nëse ai është një përdorues i autorizuar. Kjo do t'ju ndihmojë të shmangni gabimet e mundshme dhe do t'ju shpëtojë nga mashtruesit.
Marrëveshjet fitimprurëse janë një realitet, i cili nesër mund të bëhet një shans i shkëlqyeshëm për ju që të blini gjithçka që ju nevojitet me cilësi të shkëlqyer me çmimin më të ulët.
Portali i ri i ndërtimit STROIM100.RU - Furnizuesit kryesorë dhe çmimet për materialet e ndërtimit.
Projekti që sjellim në vëmendjen tuaj është portal informativ, ku paraqiten çmimet e furnitorëve kryesorë Materiale ndërtimi të tilla si tulla, betoni, pllaka dyshemeje, mure tharëse, Tuba metalo-plastikë Edhe me shume.
Qëllimi kryesor i projektit është t'u sigurojë blerësve potencialë, në bazë të aksesit të lirë, informacione për disponueshmërinë, çmimin dhe cilësinë e materialeve të ndryshme të ndërtimit, duke treguar koordinatat e furnitorëve të mundshëm.
Navigimi i përshtatshëm i portalit Stroim100 e bën sa më të lehtë navigimin dhe zgjedhjen lloji i duhur materialet e ndërtimit, shikoni çmimet e furnitorëve, dërgoni aplikacione, shpallni tenderët. Veçoritë që u ofrohen përdoruesve reduktojnë kohën e kaluar për të kërkuar, ndihmojnë në zgjedhjen e artikujve më të mirë dhe krahasimin e çmimeve nga furnitorët.
Gëzuar blerjet dhe transaksionet në portal!
}Përshkrimi i tubit të profilit 100x100x4
Është një element i domosdoshëm në ndërtim. Trashësia e çelikut arrin 4 mm dhe përdoret për qëllimin e synuar për të forcuar strukturat metalike. Kjo trashësi ushtron presion serioz në të gjithë strukturën, ndaj duhet përdorur vetëm në ndërtimin e strukturave serioze. Materiali i prodhuar përputhet me GOST 8682 dhe i nënshtrohet një kampionimi serioz, ku materiali me cilësi të ulët refuzohet. Strukturat e profilit vendosen horizontalisht në themele të përgatitura paraprakisht. Ky tub është opsioni më i popullarizuar në ndërtim rafte vertikale dhe kërcyesit. Për të siguruar tubin, është e nevojshme të përdorni një stërvitje. Trashësia 4 mm është opsioni më optimal për të punuar me të makinë saldimi dhe vida vetë-përgjimi.
Karakteristikat
Nota e çelikut nga e cila është bërë produkti është 09g2s
Gjatësia mesatare është gjashtë metra (6 m)
Pesha për metër - 12 kg
Ka 82.7 metra linearë në një ton
Trashësia e murit - 4 mm
Gjerësia dhe lartësia - 100 mm
Fusha e aplikimit të tubit të profilit 100x100x4
Ky lloj i produkteve metalike prodhohet duke përdorur pajisje të teknologjisë së lartë, nga klasa çeliku me cilësi të lartë. Kjo lejon që tubat të përdoren në ndërtimin e komplekseve të banimit dhe strukturave me kompleksitet të ndryshëm. Tuba me karakteristika të tilla përdoren në mënyrë aktive në fushat e ndërtimit, inxhinierisë mekanike dhe prodhimit të avionëve. Devijimet maksimale që mund të lejohen gjatë prodhimit nuk duhet të kalojnë +/- 0,8%. Kjo vlen për dimensionet e jashtme. Gabimi maksimal i lejuar në prodhimin e mureve nuk kalon 4%.
Në procesin e kryerjes së llogaritjeve të strukturave të çelikut, është e nevojshme të dihet pesha e njehsorit tub profili. Përdoret jo vetëm për prodhimin e strukturave mbështetëse, por edhe në prodhimin e veglave të makinerive, makinerive dhe të tjera speciale dhe Qëllimi i përgjithshëm. Dizajni profesional i njësive të tilla nënkupton marrjen parasysh të të gjithë parametrave materialet fillestare, duke përfshirë masat e secilit element.
Nga çfarë varet masa?
Për të përcaktuar masën e çdo produkti, është e nevojshme të dihet sasia e materialit të shpenzuar për prodhimin e tij. Tubi i profilit nuk bën përjashtim. Pesha njehsor linear dizajne madhësive të mëdha 180x180x60 ose e mesme 50x50x5 varet nga disa parametra. Këto përfshijnë karakteristikat e mëposhtme të produktit:
- Forma
- Dimensionet
- Graviteti specifik i çelikut
Aktualisht, modelet më të njohura janë konfigurimet katrore dhe drejtkëndore. Ato janë optimale për instalim si elementë mbajtës të ndërtesave, pjesë individuale pajisje makinerish. Falë sipërfaqeve të lëmuara, çiftimi i pjesëve individuale nuk shkakton ndonjë vështirësi të veçantë. Gjithashtu, gjatë zgjedhjes, merret parasysh lehtësia relative e përpunimit të materialit për të krijuar njësi montimi.
Pesha e një metri linear të një tubi të profilit katror ose formë drejtkëndëshe lehtë për t'u llogaritur duke përdorur formula të thjeshta. Kjo bën të mundur marrjen e të dhënave të sakta teknologjike dhe operacionale për projekte komplekse pa përdorimin e programeve të veçanta llogaritëse.
Gjerësia, lartësia dhe trashësia e murit të strukturës janë faktorët përcaktues kur llogaritet sasia e materialit fillestar të nevojshëm për prodhimin e tij. Sa më të larta të jenë këto vlera, aq më i rëndë do të jetë tubi i profilit. Pesha nuk varet ndjeshëm nga shkalla e rrumbullakimit të qosheve të jashtme, por për produktet ovale ky është një nga parametrat përcaktues. Duke ditur dimensionet e kërkuara gjeometrike, mund të llogarisni vëllimin e përgjithshëm të materialit prodhues të përdorur për të prodhuar 1 m.p. profil çeliku. Dimensionet dhe pesha varen drejtpërdrejt nga njëra-tjetra. Kur një nga parametrat rritet, i dyti në mënyrë të pashmangshme rritet.
Është raporti i masës së çdo substance që kërkohet për të mbushur një vëllim të caktuar. Matur në kg/m?. Pesha e një profili çeliku të çdo konfigurimi varet drejtpërdrejt nga ajo. Sa më i lartë të jetë dendësia e materialit, aq më i rëndë do të jetë 1 m.p. produkteve. Për klasat e zakonshme të çelikut, ky parametër varion nga 7500 në 7800 kg/m?. Ky parametër varet nga raporti i hekurit, karbonit dhe gize në aliazh. Për shembull, sa më e lartë të jetë përmbajtja e karbonit, aq më e lehtë është nota e çelikut. Megjithatë, kjo do të ndikojë në karakteristikat e saj të forcës.
Por a duhet të dini peshën e saktë të tubit të profilit?
Pse duhet të dini masën e një produkti?
Në pamje të parë, ky parametër nuk është shumë i rëndësishëm për dizajnin struktura të vogla. Sidoqoftë, kur kryeni llogaritjet e karakteristikave kryesore, bëhet e nevojshme të zbuloni ngarkesat në pikat e ndërfaqes elemente individuale. Është pothuajse e pamundur ta bësh këtë pa të dhëna të sakta për masën e secilit prej tyre.
Përveç kësaj, pesha e tubave drejtkëndëshe të profilit ndikon drejtpërdrejt në koston e tyre. Sigurisht, ky parametër merr parasysh intensitetin e punës së prodhimit, por sasia e materialit gjithashtu ndikon ndjeshëm në koston e produktit përfundimtar. Për më tepër, çeliku i mbështjellë tradicionalisht sasi të mëdha shitet jo në m.p., por në ton. Arsyeja për këtë është vështirësia e numërimit të numrit të produkteve gjatë dërgesës. Me ndihmën e sistemeve të veçanta matëse, kjo procedurë kryhet shumë më shpejt. Kjo është një arsye tjetër pse duhet të jeni në gjendje të llogaritni se sa peshon një metër produkt çeliku.
Si rezultat, mund të themi se masa strukturë çeliku të nevojshme për llogaritjet e sakta, si dhe për përcaktimin e kostos së të gjithë produktit. Vetëm Një qasje komplekse zgjedhja e një konfigurimi specifik të çelikut të mbështjellë do t'ju lejojë të përfundoni çdo projekt jo vetëm në një nivel profesional, por edhe me kosto optimale financiare.
Metodat e llogaritjes
Në shumicën dërrmuese të rasteve, kur shitet çeliku i mbështjellë, kostoja e tij tregohet në ton. Sidoqoftë, për të llogaritur masën e profileve 40x20 ose 80x80x4 mm, duhet të dini peshën e tyre specifike në një metër linear. Për ta bërë këtë, së pari llogaritni vëllimin total të secilit lloj çeliku të mbështjellë. Për të kryer këtë operacion të thjeshtë, duhet të dini dimensionet e tyre themelore gjeometrike. Vlen të përmendet se të gjitha metodat ekzistuese të thjeshta janë krijuar për produkte madhësive standarde- katror ose drejtkëndor. Për ta mjafton të kenë informacion për parametrat gjeometrikë dhe llojin e aliazhit metalik.
Së pari ju duhet të llogaritni vëllimin (V) të materialit të përdorur në një metër linear. Për ta bërë këtë, duhet të dini dimensionet e sakta të lartësisë (B), gjerësisë (A) dhe trashësisë së mureve të profilit (S). Për qartësi, le të llogarisim peshën e një tubi profili 80 40 me një trashësi muri 4 mm.
V=S*0.02*(A+B)=0.015*4*(80+40)= 7.2 mm?
Kjo është një nga formulat më të thjeshta. Por nuk merr parasysh rrezet e rrumbullakimit të qosheve të strukturës. Për produktet me trashësi të madhe muri, kjo shifër mund të jetë mjaft domethënëse. Në këtë rast, rekomandohet të përdorni një formulë më të saktë:
V= 0,0157*S*(A+B-2,86*S)=0,0157*4(40+80-2,86*4)=6,8 mm?
Siç mund ta shihni, sipas formulës së fundit, vlera e vëllimit doli të jetë dukshëm më e vogël. Kjo është për shkak të përdorimit aktual të materialit në prodhimin e strukturës së çelikut.
Duke ditur vëllimin, mund të llogaritni peshën teorike të tubit të profilit. Për ta bërë këtë, do t'ju duhet vlera specifike e gravitetit të një kategorie specifike çeliku. Meqenëse çdo aliazh ka gravitetin e vet unik specifik, një tabelë me më të njohurat do të ndihmojë në llogaritjet.
Duke zëvendësuar vlerën e një kategorie të caktuar aliazhi, mund të llogarisni masën e profilit 80x40x4. Për ta bërë këtë, duhet të modifikoni pak formulën e fundit për llogaritjen e vëllimit të materialit:
M= (Ro/7850)*V=(7900/7850)*6.8= 6.85 kg/m.p.
Në këtë mënyrë, ju mund të llogarisni peshën e një tubi profili të pothuajse çdo konfigurimi. Megjithatë, kjo teknikë nuk mund të përdoret për ovale dhe struktura komplekse. Në këtë rast, mund të drejtoheni te specialistët kalkulatorë në internet. Me ndihmën e tyre, mund të zbuloni shumë produkte të profilit të madhësive më të njohura 60x60, 160x160x8 dhe 100x100x8. Në punë të përhershme Me këto vlera, për çdo lloj strukture profili përpilohet një tabelë e veçantë e peshës.
Pesha e disa produkteve të profilit
Por si mund ta zbuloni peshën e një tubi të profilit të galvanizuar? Trashësia e shtresës mbrojtëse të zinkut është disa mikronë. Prandaj, për këtë lloj materiali, mund të përdorni një teknikë standarde, duke marrë parasysh shkallën e çelikut të zgjedhur për prodhim.
Për të ndihmuar në përpilimin dokumentacionin e projektit Shpesh ata marrin të dhëna nga tabelat e veçanta të llogaritjes së peshës. Ato tregojnë masat e llojeve më të zakonshme të produkteve të profilit në varësi të dimensioneve gjeometrike dhe trashësisë së murit.
Profili drejtkëndor:
Profili katror:
Për madhësi jo standarde nga 120x120, pesha përcaktohet me llogaritje në varësi të konfigurimit të produktit. Për profile të tilla, është e rëndësishme të dini vlerën e rrezes së lakimit, pasi llogaritja e saktë e masës totale të strukturës varet kryesisht nga ajo. Siç u përmend më lart, në këtë rast është mirë të përdoren programe të specializuara inxhinierike llogaritëse.
A është e vështirë të llogaritet në mënyrë të pavarur pesha e një metri të tubit të profilit? Nëse kjo duhet të bëhet për strukturat katrore ose drejtkëndore, atëherë duke përdorur metodën e përshkruar më sipër, mund të llogaritni masën e produktit pa paketa speciale softuerësh. Nëse prerja tërthore e tubit ka formë komplekse, atëherë është e nevojshme të përdoren metoda komplekse të llogaritjes.
4,33 /5 (86,67%) 6 vota
Pesha e tubit të profilit. Tabela.
Tub profili për shkak të peshës së tij të ulët, kostos dhe prakticitetit, përdoret më shpesh në ndërtimin e strukturave me kompleksitet të ndryshëm (porta, gardhe, mobilje, kangjella, zona tregtare, objekte sportive). Një nga avantazhet e një tubi të tillë është instalimi i përshtatshëm dhe rregullimi i shpejtë i të gjithë elementëve të produktit. I vogël pesha e tubit të profilit nuk bëhet pengesë për të relativisht qëndrueshmëri të lartë dhe ndryshimet e temperaturës. NË përdorim të përgjithshëm tubi i profilit është i mundur në zona të ndryshme ku ka kërkesa për peshën, saktësinë dhe besueshmërinë e materialit.
Forma tub profili ndryshon nga standardi , tuba, nuk ka asnjë formë të rrumbullakët në arsenalin e saj. Ata prodhojnë tuba katrorë, drejtkëndëshe, ovale, të sheshta ovale, në formë loti dhe të profilizuar posaçërisht. Më poshtë është tabela e dimensioneve dhe peshës së tubit të profilit.
Tubat e profilit vijnë me një shtresë kundër korrozionit, e cila përmirëson rezistencën ndaj ndikimeve të jashtme të mjediseve agresive. Ato janë bërë gjithashtu nga varieteteve të ndryshme inox Më shpesh, tuba të tillë gjejnë aplikimin e tyre në industrinë ushqimore dhe kimike.
Vepron në një tub profili katror GOST 8639-82. Ky standard parashikon prodhimin e tubave të profilit: çeliku pa qepje (i deformuar i ftohtë dhe i nxehtë); elektrik-salduar dhe elektrik (i deformuar në të ftohtë).
Tubat e profilit janë një lloj tubi çeliku i mbështjellë që ka një seksion kryq katror ose drejtkëndor madhësive të ndryshme dhe pesha prej 1 metër linear. Profilet e mbështjellë prodhohen nga deformimi llamarine kur kalon nëpër një mulli kalibrues të ndjekur nga saldimi i bashkimit gjatësor. Profilizimi i çelikut kryhet për shkak të plasticitetit të metaleve, forma e të cilave mund të ndryshohet nga deformimi në mullinjtë e petëzimit. Në figurën e mëposhtme mund të shihni teknologjinë e prodhimit të profileve të mbështjellë, se si, duke përdorur deformimin, fletëve të mbështjellë u jepet një formë katrore ose drejtkëndore me katër ngurtësues dhe katër plane. Në këtë rast, tubat e profilit marrin madhësinë e kërkuar të një katrori ose drejtkëndëshi dhe priten në një gjatësi prej 9-12 metrash linearë. Materiali i përdorur për prodhimin e tubave është klasat e çelikut St2, St3, 8kp, St10, St20, 09g2s, 17gs që korrespondojnë me GOST 1050-88 dhe GOST 380-94.
Duke përdorur këtë teknologji, prodhohen tuba alumini, tuba inox dhe profile të galvanizuara. E mira e metodës së galvanizimit të çelikut të profilizuar është se rrit ndjeshëm jetëgjatësinë e çelikut të lakuar, sepse këtë shtresë ka veti kundër korrozionit aktrim i gjatë. Tubi katror i galvanizuar përdoret në strukturat strukturore të çelikut kur kërkohet rezistencë ndaj kushteve të pafavorshme mjedisi dhe në të njëjtën kohë pamjen estetike të strukturave, për shembull, ndalesat e transportit publik, shtizat e flamurit, tabelat, tabelat reklamuese drejtkëndëshe, terrenet për fëmijë ose sport.
Zhvillimi i industrisë së ndërtimit ka çuar në një zgjerim të gamës së produkteve të petëzuara dhe të petëzuara në nxehtësi dhe një rritje të prodhimit të llojeve të pakta të produkteve të petëzuara. Në të njëjtën kohë, nevoja për zgjerimin e prodhimit të profileve ekonomike po rritet. Këto lloje produktesh të mbështjellë përfshijnë gypat me mure të hollë dhe tuba të rrumbullakët, profile qoshe me mure të hollë, kanale, çelik të lakuar etj. Për inxhinierinë mekanike serike ka rëndësi të madhe prodhimi i profileve periodike, përdorimi i të cilave siguron kursime të konsiderueshme në metal (deri në 20...30%), rrit produktivitetin e stampimit.
Është e rëndësishme të dini se, në varësi të metodës së prodhimit, tubat e profilit mund të jenë të deformuara në nxehtësi ose të deformuara në të ftohtë. Përveç kësaj, ka tuba me saldim elektrik nga çeliku i karbonit. Çeliku i deformuar në të ftohtë ka cilësi strukturore dukshëm më të mira, por çmimi i një tubi profili të bërë nga deformimi i ftohtë do të kushtojë pak më shumë.
Teknologjia e prodhimit të profilit
Profili i prerjes tërthore të tubave ndryshon: të rrumbullakëta dhe në formë, ovale, drejtkëndëshe, katrore, tre, gjashtë dhe tetëkëndëshe, me brinjë, të segmentuar, në formë loti dhe profile të tjera. Diametri i jashtëm i tubave është 0.3 - 2520 mm, trashësia e murit është 0.05 - 75 mm.
Operacionet kryesore teknologjike të çdo skeme teknologjike për prodhimin e produkteve të tubave të mbështjellë përfshijnë: përgatitjen e materialeve burimore; ngrohja para rrotullimit (me përjashtim të tërheqjes së ftohtë, kur, megjithatë, shpesh kërkohet një operacion tjetër - trajtimi i duhur i nxehtësisë); rrotullim i nxehtë dhe i ftohtë; kalibrimi dhe prodhimi profilet e përkulura; përfundimi me operacionet e prerjes, drejtimit, trajtimit termik, heqjes së defekteve sipërfaqësore, gravurës etj.
Tubat e çelikut prodhohen nga karboni, aliazh dhe aliazh të lartë (krom-molibden, krom-nikel, mangan, rezistent ndaj korrozionit, rezistent ndaj nxehtësisë) me më shumë se 350 klasa.
Përparësitë e përdorimit të produkteve të mbështjellë të profilit:
Konsumi i ulët i metalit për shkak të peshës së ulët të tubit të valëzuar në peshën totale të strukturave metalike të ndërtesave dhe strukturave, dhe për këtë arsye kostoja e metalit;
- kostoja e instalimit të strukturave të lehta është më e ulët, sepse pesha specifike e tubit profesional është më e lehtë;
- lehtësia e bashkimit të tubave drejtkëndëshe dhe katrore në strukturat metalike;
- garantimi i sigurisë nga zjarri i ndërtesave dhe strukturave duke thjeshtuar projektimin e strukturave metalike nga tubat me moderne pamjen;
- kosto e arsyeshme prej 1 ton për shkak të peshës së ulët të një metri linear të tubit të profilit me ngarkesa të mëdha mbajtëse.
Është gjithashtu e rëndësishme që, në krahasim me tubat e rrumbullakët, tubat e valëzuar të jenë shumë të përshtatshëm për transport dhe ruajtje (seksionet katrore dhe drejtkëndore janë ngjitur me njëra-tjetrën në një pirg metali pa hendek), dhe shumë më pak para shpenzohen për dorëzimin e një ton tuba. Kështu, tubi i valëzuar mund të konsiderohet më i përshtatshëm dhe ekonomik për t'u prodhuar strukturat metalike për shumë industri Ekonomia kombëtare. Për shkak të lehtësisë së instalimit në strukturat e mureve të ndërtesave, e cila sigurohet nga forma e saj katrore ose drejtkëndore, tubi shpesh përdoret për vendosjen e komunikimeve. Është e rëndësishme të theksohet thjeshtësia dhe shpejtësia e lartë e instalimit të strukturave të tubave dhe lehtësia e trajtimit kundër korrozionit.
Tubat e profilit janë bërë prej karboni dhe çeliku me aliazh të ulët. Fabrikat e Ukrainës kanë krijuar kushte të ndryshme teknike për madhësitë, klasat e çelikut dhe dimensionet e prerjes tërthore për tubacionet katrore dhe drejtkëndore që variojnë nga 15x15 deri në 450x350 mm. Trashësia e murit mund të arrijë 12 mm, dhe gjatësia varion nga 6 në 12 metra, në varësi të Specifikimet teknike prodhuesi ose GOST.
Tuba prodhohen në përputhje me kërkesat e standardit për rregulloret teknologjike. Madhësia e jashtme e seksionit kryq të një profili katror ose drejtkëndor, trashësia e murit dhe devijimet maksimale për to duhet të përputhen me kërkesat GOST.
Tubat e profilizuar karakterizohen nga dy lloje kryesore të parametrave: gjeometrike dhe teknike. Parametrat gjeometrikë tuba: dimensionet e jashtme, trashësia dhe gjatësia e murit. Dimensionet dhe trashësia e murit tregohen gjithmonë në mm, dhe gjatësia në metra.
Trashësia e murit të tubit profesional është e një rëndësie thelbësore gjatë përcaktimit të peshës së tubit. Në praktikë, magazinat metalike tregojnë çmimin për ton, dhe jo metra linear, për shkak të mbizotërimit të përbërësit të lëndës së parë në koston e tubave. Në thelb, tubat e valëzuar në magazinat metalike nuk peshohen, natyrisht. Ne po flasim për peshën teorike të tubit (e cila tregohet në GOST). Shumë pyetje lidhen me gjatësinë e boshllëqeve. Kërkesat e GOST këtu janë mjaft të buta, të tilla si: tubat me një madhësi të madhe seksioni (mm) prodhohen me një gjatësi prej të paktën 5 m, ose "nga 10.6 në 11.6 metra" për seksione më të vogla.
Përveç përmasave gjeometrike, pjesa e punës duhet të plotësojë disa kërkesa (kushte) teknike: çfarë lloj tegeli, çfarë lloj çeliku, çfarë provash duhet t'i nënshtrohet tubi, si është shënuar, etj. Kjo rregullohet nga GOST të ndryshme dhe specifikime teknike.
Llogaritja e peshës së tubit të profilit
Sa peshon një metër linear tubi?
Duke marrë parasysh ekzistencën e një game të madhe tubash profili, lindin disa vështirësi nëse është e nevojshme të llogaritet pesha prej 1 m tub profesional, të zbulohet kostoja për metër duke ditur çmimin për kg, të llogaritet se sa metali në aplikacioni peshon duke ditur gjatësinë totale të profilit.
Pesha e një njehsori linear të një tubi të profilit varet nga madhësia e seksionit kryq dhe trashësia e murit, d.m.th. nga sipërfaqja prerje tërthore. Tabela e produkteve metalike të mbështjellë tregon peshën teorike prej 1 metër linear, megjithatë, kur llogaritni numrin e tubave duke përdorur tabela të masës së tubave të valëzuar të seksioneve katrore dhe drejtkëndore, është e nevojshme të merret parasysh se GOST parashikon një të lejuar devijimi i peshës aktuale nga teorike në 12%.
Pra, duhet të zbuloni se sa peshon tubi i profilit. Llogaritja mund të kryhet duke përdorur formulën për llogaritjen e peshës së fletës së mbështjellë, me ndryshimin e vetëm që për të llogaritur masën e një tubi të valëzuar, duhet të llogaritni gjatësinë e një katrori ose drejtkëndëshi (perimetri) në metra, shumëzoni kjo vlerë nga graviteti specifik i çelikut (7,85 g/dm3) dhe nga trashësia e murit në mm. Në këtë mënyrë ju mund të llogaritni peshën e një metri linear të një tubi profili me seksion kryq drejtkëndor ose katror. Shembulli i konsideruar i llogaritjes ju lejon gjithashtu të llogaritni peshën e një tubi çeliku seksion i rrumbullakët, dhe do të keni gjithmonë në dorë numrat e nevojshëm me karakteristikat e peshës në diapazon të madhësive të ndryshme. Ju mund të zbuloni peshën e tubave pa përdorur asortimentin e profileve të përkulura në internet, por me një kalkulator mund të llogarisni shpejt peshën e tubave të profilit për çdo qëllim, qoftë transporti me transport, instalimi i një sistemi të furnizimit me ujë me duart tuaja , ose prodhimin e strukturave metalike.
Kjo formulë për llogaritjen e 1 m tub profili do të jetë e dobishme për ju nëse nuk keni në dorë një tabelë me pesha metalike të mbështjellë, sepse gjatësia e shpalosur llogaritet me një përafrim; masa e 1 metër linear është e pasaktë. Përveç tabelës së llogaritjes, ka shumë opsione programet online në formën e një kalkulatori për llogaritjen e peshës së tubave të profilit, i paraqitur në seksionin e faqes sonë të internetit "Asortimenti i metaleve të mbështjellë" si "Llogaritësi metalik". Llogaritësi i avancuar metalik për tubat e profilit ju lejon të automatizoni procesin e llogaritjes së peshës (kg, ton) ose gjatësisë (metra) të tubave të mbështjellë, në varësi të parametrave të futur në kalkulatorin e tubit.
Pesha teorike e një tubi me profil katror
Asortiment tuba katrorë përcaktohet nga standardi GOST 8645-68, i cili përcakton kërkesat për tubat me saldim elektrik.
Një tub katror është një profil metalik i uritur me një seksion të mbyllur. Dimensionet e sheshit korrespondojnë me standardin GOST 8639-82, kërkesa teknike duhet të përputhet me GOST 13663-86, i cili rregullon asortimentin e tubave të profileve të salduara elektrike me qëllime të përgjithshme të bëra prej çeliku të karbonit.
Tabela - "Pesha e tubit katror për metër linear"
Madhësia e tubit katror, mm | Trashësia e murit S, mm | Pesha specifike, kg/m |
15x15 | 1,0 | 0,479 |
15x15 | 1,5 | 0,707 |
15x15 | 2,0 | 0,926 |
20x20 | 1,0 | 0,620 |
20x20 | 1,5 | 0,930 |
20x20 | 2,0 | 1,225 |
25x25 | 1,0 | 0,793 |
25x25 | 1,5 | 1,178 |
25x25 | 2,0 | 1,554 |
30x30 | 1,0 | 0,942 |
30x30 | 1,5 | 1,401 |
30x30 | 2,5 | 2,296 |
40x40 | 1,0 | 1,24 |
40x40 | 1,5 | 1,849 |
40x40 | 2,0 | 2,447 |
50x50 | 1,5 | 2,34 |
50x50 | 2,0 | 3,10 |
50x50 | 2,5 | 3,86 |
60x60 | 1,5 | 2,8 |
60x60 | 2 | 3,72 |
60x60 | 2,5 | 4,63 |
Për ndërtimin përdoret një tub katror me një seksion kryq 60x60 ose 80x80 gardhe metalike. Për transportuesit strukturat e ndërtimit perdoren tuba profesional me permasa 100x100. Në prodhimin e strukturave metalike të lehta që nuk i nënshtrohen ngarkesave të rënda, përdoret një tub madhësia katrore 25x25 me veshje të galvanizuar, e cila ju lejon të mbroni metalin nga ndikimet e jashtme, dhe gjithashtu bën të mundur vendosjen e sistemeve të komunikimit në kushte të ndryshme: lagështia e lartë, ndryshimet e temperaturës, kontakti i drejtpërdrejtë me një mjedis agresiv.
Pesha e tubit të profilit drejtkëndor 1 m
Gama e tubave drejtkëndëshe është prodhuar në përputhje me GOST 13663-86. Tubat drejtkëndëshe janë produkte çeliku që kanë një seksion kryq të zbrazët brenda dhe një gjatësi relativisht të gjatë. Sipas metodës së prodhimit, tubat ndahen në të deformuar në nxehtësi, të deformuar në të ftohtë dhe me saldim elektrik. Tubat e çelikut prodhohen ose të trajtuara me nxehtësi ose pa trajtim termik.
Tuba drejtkëndëshe me precizion të lartë të bërë nga notat e karbonitçeliku është i destinuar për prodhimin e konstruksioneve metalike, pjesëve të makinave, makinerive bujqësore, konstruksioneve të ndryshme metalike të ndërtesave, etj.
Tabela - "Pesha e tubit drejtkëndor për metër linear"
Madhësia e tubave drejtkëndëshe, mm | Trashësia e murit, mm | Pesha 1 m, kg |
20x15 | 1.5 | 0.810 |
20x15 | 2.0 | 1.070 |
25x15 | 1.0 | 0.620 |
25x15 | 1.5 | 0,930 |
25x15 | 2.0 | 1,225 |
30x20 | 1,5 | 1,178 |
30x20 | 2 | 1,554 |
40x20 | 1.5 | 1.401 |
40x20 | 2.0 | 1.853 |
40x25 | 1.5 | 1.554 |
40x25 | 2.0 | 2.057 |
50x20 | 1.5 | 1.660 |
50x20 | 2.0 | 2.198 |
50x25 | 1.5 | 1.778 |
50x25 | 2.0 | 2.355 |
50x30 | 1.5 | 1.849 |
50x30 | 2.0 | 2.449 |
50x40 | 1.5 | 2.100 |
50x40 | 2.0 | 2.790 |
50x40 | 2.5 | 3.470 |
60x20 | 1.5 | 1.849 |
60x20 | 2.0 | 2.449 |
60x20 | 2.5 | 3.020 |
60x25 | 1.5 | 2.037 |
60x25 | 2.0 | 2.700 |
60x25 | 2.5 | 3.320 |
60x30 | 1.5 | 2.108 |
60x30 | 2.0 | 2.794 |
60x40 | 1.5 | 2.340 |
60x40 | 2.0 | 3.100 |
60x40 | 2.5 | 3.860 |
70x30 | 1.5 | 2.340 |
70x30 | 2.0 | 3.100 |
70x30 | 2.5 | 3.860 |
70x40 | 1.5 | 2.580 |
70x40 | 2.0 | 3.420 |
70x40 | 2.5 | 4.260 |
80x30 | 1.5 | 2.580 |
80x30 | 2.0 | 3.420 |
80x30 | 2.5 | 4.260 |
80x40 | 1.5 | 2.800 |
80x40 | 2.0 | 3.720 |
80x40 | 2.5 | 4.630 |
80x40 | 3 | 3,83 |
80x40 | 3,5 | 4,39 |
80x40 | 4 | 4,93 |
Pesha e një metri linear të tubit të profilit në tabelë - vlera teorike. Pesha aktuale mund të ndryshojë deri në 12%.
Duke ditur peshën prej 1 m, duhet të llogarisni sa metra janë në një ton tub profili. Për shembull, duhet të zbulojmë se sa metra janë në një ton çeliku të profilit 80x40x4. Pesha e një metri linear të tubit është 4.93 kg. Ne llogarisim numrin e metrave në një ton - 1000/4.93 = 202.84 m.
Shembull simbolet : tub drejtkëndor dimensionet A = 60 mm, B = 20 mm me trashësi muri 2 mm, gjatësi shumëfish 1250 mm, prej çeliku të klasës 10, grupi B GOST 13663-86:
Tub 60x20x2x1250 cr GOST 8645-68 V 10 GOST 13663-86