Ekzistojnë disa dhjetëra lloje skedarësh, të ndryshëm në karakteristikat e tyre të performancës. Qëllimi i këtij mjeti është heqja e një shtrese materiali, i cili mund të jetë, për shembull, druri, metali ose plastika. Çdo skedar përbëhet nga një pjesë pune dhe një dorezë. Një prerje e veçantë aplikohet në trupin e mjetit, për shkak të së cilës është e mundur të hiqen shtresat e materialit nga sipërfaqja e produktit. Lloji i një skedari të caktuar dhe emri i tij përcaktohen saktësisht nga madhësia e nivelit.
Skedarët janë një emër i përgjithshëm për një linjë të tërë veglash, e cila përfshin skedarë rraspash dhe gjilpërash. Një mjet i tillë mund të ketë madhësi të ndryshme dhe profili. Më shpesh, zejtarët duhet të punojnë me skedarë me një seksion të sheshtë ose katror. Ekziston një mjet pjesa e punës e cila ka një profil të rrumbullakët, ovale, në formë diamanti ose trekëndësh. Me një arsenal dosjesh tipe te ndryshme dhe seksione, një mekanik mund të përpunojë pjesë të konfigurimeve shumë komplekse.
Për çfarë është një rrëpirë?
Një skedar mjaft i trashë me një nivel të madh quhet një rrëpirë. Ky mjet zakonisht përdoret për përpunimin paraprak të pjesëve të bëra prej metali të butë, plastike, druri, gome ose lëkure. Një skedar tradicional nuk do të ndihmojë këtu, pasi sipërfaqja e tij e punës shumë shpejt bllokohet me material (tallash ose ashkël) dhe ndalon heqjen e tij nga sipërfaqja e produktit.
Rrushi më i zakonshëm ka një prerje të rrafshët dhe një hundë të mprehtë, megjithëse ka edhe mjete me një majë të mprehtë. Është më pak e zakonshme të përdoren prush të rrumbullakët dhe gjysmërrethor. Prerja e kësaj dosjeje të trashë është e madhe dhe shpesh ka brazda që ndodhen përpara çdo dhëmbi. Pas përpunimit me një rrëpirë, produktet zakonisht përfundohen me skedarë me një nivel më të imët.
Skedari i gjilpërës dhe funksionet e tij
Skedari i gjilpërës ka një qëllim krejtësisht të ndryshëm. Shërben për saktësi dhe duke përfunduar detaje të vogla. Në prodhim dhe në jetën e përditshme, ka shumë shpesh situata kur është e nevojshme t'i jepet një pamje e përfunduar një produkti metalik. formë komplekse, ktheni ose përpunoni një pjesë të vogël. Kjo është ajo ku skedari i gjilpërës i vjen në ndihmë mekanikut. Ky skedar i vogël, i prerë imët mund të futet në zonat më të vështira për t'u arritur.
Forma e trupit të punës së skedarit të gjilpërës mund të jetë krejtësisht e ndryshme. Mjeshtrit me eksperiencë preferojnë të kenë grupe të disa skedarëve të tillë në familjen e tyre, duke i përdorur ato individualisht ose në vazhdimësi, njëri pas tjetrit. Një nivel i dyfishtë - kryesor dhe ndihmës - ndihmon skedarët e gjilpërave të përpunojnë pjesët në mënyrë efektive. Numri i nivelit zakonisht shënohet në dorezën e mjetit.
Në varësi të madhësisë së dhëmbit, pikës dhe numrit të dhëmbëve për 1 cm të gjatësisë së skedarit, pikave u caktohen numrat përkatës:
Nr. 1 - dosje bastard, të cilat kanë 5-13 dhëmbë për 1 cm gjatësi ( nivel i madh);
Nr. 2 - dosje personale, të cilat kanë 13-25 dhëmbë për 1 cm gjatësi (notch mesatar);
Nr. 3, 4, 5 dhe 6 - skedarë prej kadifeje me numrin e dhëmbëve për 1 cm gjatësi 25-80 (prerja më e vogël).
Skedarët mund të kenë një prerje të vetme ose të dyfishtë (të kryqëzuar).
Përdorimi i skedarëve të një klase ose një tjetër varet nga natyra e punës që kryhet, d.m.th., nga trashësia e shtresës metalike që hiqet dhe nga saktësia e kërkuar e përpunimit.
Skedarët Bruiser nr. 1 përdoret për përpunim të ashpër, kur është e nevojshme të hiqet një shtresë e madhe metali (të paktën 0,25 mm). Leja që metali të mbushet me një skedar derri është 0,5-1 mm, në varësi të natyrës së sipërfaqes që përpunohet.
Një skedar me një prerje brutale heq një shtresë metali 0,08-0,15 mm të trashë me një goditje dhe jep një saktësi përpunimi prej 0,1-0,15 mm.
Dosjet personale nr. 2 përdoret pasi shtresa kryesore e metalit që do të mbushet është hequr tashmë nga pjesa duke përdorur një skedar hog. Për përpunimin me një skedar personal, zakonisht lihet një lejim prej jo më shumë se 0,15-0,35 mm. Një skedar personal heq një shtresë metali 0,02-0,08 mm të trashë dhe arrihet një saktësi mjaft e lartë e përpunimit prej 0,025-0,05 mm. Pas mbushjes me një skedar personal, në sipërfaqen e trajtuar mbeten goditje aq të vogla sa sipërfaqja duket e lëmuar.
Skedarë prej kadifeje Nr. 3, 4, 5 dhe 6 përdoren vetëm për përfundimin, montimin, përfundimin më të saktë të pjesëve dhe bluarjen e sipërfaqeve. Sipërfaqja e përpunuar me këtë skedar nuk ka asnjë goditje të dukshme me sy ose të dukshme nga gishtat.
Skedarët e prerë me kadife heqin një shtresë shumë të vogël metali me trashësi 0,025-0,05 mm dhe ofrojnë saktësi të lartë përpunimi prej 0,01-0,005 mm.
Qëllimi i dosjeve. Skedarët ndryshojnë nga njëri-tjetri jo vetëm në llojet e prerjeve, por edhe në formë prerje tërthore, pra profili.
Nevoja për të përdorur profile të ndryshme skedarësh shkaktohet nga shumëllojshmëria e gjerë e formave të pjesëve të punës. Prandaj, në varësi të formës së pjesës së punës, përdoren profile të ndryshme skedarësh.
Skedarët e sheshtë përdoret për përpunimin e sipërfaqeve të sheshta të jashtme dhe të brendshme, si dhe të jashtme konvekse (Fig. 106, a).
Skedarët katrorë(Fig. 106, b) rrafshet e vrimave katrore dhe drejtkëndore dhe brazda të ndryshme janë skeduar. Skedarët katrorë me gjatësi të madhe (350-500 mm) quhen gurë grilë dhe përdoren për spërkatje të përafërt (të përafërt) të një produkti, kur është e nevojshme të hiqet një shtresë metali prej të paktën 1 mm.
Skedarët trekëndësh(Fig. 106, c) shërbejnë kryesisht për skedimin e këndeve të brendshme.
Skedarët e rrumbullakët(Fig. 106, d) përdoren për mbushjen e prerjeve dhe vrimave të rrumbullakosura në produkte.
Skedarë gjysmë të rrumbullakëta(Fig. 106, d) sipërfaqet konkave janë skeduar.
Fig 106 Format e seksionit të skedarëve:
a - e sheshtë, b - katrore, c - trekëndore, d - e rrumbullakët, d - gjysmërrethore, në formë diamanti e-je, g - në formë thike.
Një grup i veçantë skedarësh përfshin në formë thike(Fig. 106, g), në formë diamanti(Fig. 106, f), skedarë ovale- disqe me prerje të aplikuara rreth perimetrit dhe në anët. Ato përdoren për të ngritur qoshet dhe aeroplanët e pjerrët.
Skedari është një mjet prerës që përdoret në përpunimin e materialeve duke përdorur metoda të prerjes shtresë pas shtrese. Është një teh i bërë nga çeliku i ngurtësuar me karbon të lartë. Në sipërfaqet e tij krijohen "notime"; këto janë një lloj dhëmbësh të mprehtë; një dorezë është e vendosur në krahun e tyre në formë koni. Përdoret për përpunimin e drurit, objekteve plastike, metaleve etj.
Përdoret për të rregulluar produktet. Kjo bëhet duke hequr një shtresë materiali nga sipërfaqja. Midis tyre janë instrumente prej kadifeje me një densitet të caktuar pikash për 1 metër katror. cm, personal, bastardë, hekura. Mjeti ka një pamje të vogël dhe është i destinuar për punë delikate; quhet skedar gjilpërash.
Llojet e skedarëve - forma tërthore e sipërfaqes së punës
Forma e seksionit sipërfaqe pune mjet ka për të rëndësi të madhe. Mund të jetë e sheshtë, katrore, rombike, në formë thike, e rrumbullakët. Kur e zgjidhni atë, merren parasysh shkalla e saktësisë së përpunimit dhe madhësia e kompensimit të destinuar për paraqitje. Zgjedhja e një lloji specifik të mjetit varet nga natyra e punës që kryhet. Nëse për të përfunduar punën është e nevojshme të zmadhohet vrima në material, atëherë përdoren mjete të rrumbullakëta.
Porositni pëlhura tekstil me fije qelqi nga kompania ITER në Ukrainë në iter.org.ua.
Kur përcaktojnë mjetet për punë, ato udhëhiqen nga lloji i pikave të tyre; përdorimi i tyre varet nga kjo:
- Për metalet me ngjyra, është menduar një mjet me një nivel të vetëm;
- për gize, çelik, bronz, përdoren produkte me një prerje tërthore;
- për dru me hark, pikë, gërvishtje;
- për gomë dhe lëkurë, përdoret një mjet me një prerje të tipit të stampuar ose me pikë;
- për çelik të ngurtësuar përdoren lidhjet me fortësi, qeramika, qelqi, vegla të veshura me diamant;
- kur punoni me Gure te Cmuar, me metale, përdoret një skedar gjilpërash i lakuar prej lidhjeve magnetike, quhet pushkë.
Për të hequr një shtresë nga sipërfaqe metalike përdorni një mjet të sheshtë. Një mjeshtër zakonisht ka disa lloje skedarësh në arsenalin e tij. Ato zgjidhen në nivel lokal, zgjedhja varet nga forma e pjesës së punës. Shumë shpesh në praktikë, përdoret një lloj i sheshtë ose me 3 anë.
Llojet e skedarëve të diamantit
Sipërfaqja e një instrumenti të tillë është e mbuluar me diamant sintetik. Ato janë të destinuara për përpunim metale të forta. Llojet e materialit që përpunon ky mjet nuk janë të disponueshme për skedarë të tjerë.
Skedar gjilpërash
Skedari ka një pamje të vogël dhe është i destinuar për punë të vogla dhe të sakta, ku nuk nevojitet shpejtësi e lartë. Nëse ka një nivel, atëherë ky produkt nuk ka ndarje sipas numrave. Ata mund të përdorin diamant të thjeshtë. Çmimi i veglave ruse të diamantit është 4 herë më i lartë se ai kinez.
Një skedar druri (raspa) është një mjet që punon me dru. Ka një prerje të madhe, është menduar vetëm për përpunimin e drurit.
Madhësitë e skedarëve
Tabela tregon madhësitë dhe format kryesore të skedarëve:
Llojet e skedarëve | Numri i nivelit | Gjatësia | ||||||||
100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | ||
Dimensionet e seksionit | ||||||||||
E sheshtë | 0-5 | 12x3 | 16x4 | 18x4.5 | 22x5.5 | 28x7 | 32x8 | 36x9 | 40x10 | 45x11 |
Sheshi | 0-5 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 18 | 20 |
Trekëndësh | 0-5 | 8 | 10 | 12 | 16 | 18 | 20 | 22 | 25 | 28 |
Rombike | 1-3 | 12x3 | 16x4 | 18x4.5 | 22x5.5 | 28x7 | 32x9 | 36x12 | ||
ovale | 0-5 | 8x5.5 | 10x7 | 12x9 | 14x10 | 18x12 | 22x16 | 25x18 | 28x22 | |
Lente | 0-5 | 12x3 | 16x4 | 18x4.5 | 12x5.5 | 25x7 | 28x9 | 31x11 | ||
Rrumbullakët | 0-5 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 18 | 20 |
Kokrrat e skedarit
Ka 3 lloje drithërash. Numrat e tij nr. 1, 2, 3 thonë: sa më i madh të jetë numri në përcaktim, aq më i vogël do të jetë niveli mbi të. Skedari nr. 3 ka prerjen më të vogël. Për përpunim i ashpër materiali kërkon dosjen nr. 1. Dhe për përpunim të saktë, më të barabartë, përdorni nr. 3. Sa më i gjatë të jetë mjeti, aq më i madh është kokrra.
Bluarja e metaleve nuk bëhet gjithmonë me një vegël elektrike. Ndonjëherë skedarët përdoren për një punë të tillë; gjëja kryesore është t'i zgjidhni ato në mënyrë korrekte. Ky mjet vjen në dy lloje - për të punuar në metal dhe dru. Skedarët e projektuar për metal janë më të fortë se homologët e tyre të përdorur për dru. Kjo shpjegohet me faktin se sipërfaqja e metalit është shumë më e vështirë për t'u përpunuar sesa druri.
Mjete të tilla janë bërë prej çeliku shumë të fortë dhe ndryshojnë nga njëri-tjetri në forma dhe madhësi të ndryshme pikash. Një larmi e tillë ka çuar në faktin se është mjaft e vështirë për një person mesatar ta kuptojë për çfarë qëllimi është menduar ky apo ai mjet?. Për të përmirësuar situatën, u zhvillua klasifikimi i tyre, i cili është në fuqi edhe sot.
Karakteristikat e skedarit
pavarësisht, teknologjive moderne arritur lartësi të mëdha, një skedar përdoret ende për punimin e metaleve. Qëllimi i saj është duke përdorur bluarjen shtresë pas shtrese të sipërfaqes jepni çdo pjese formën dhe madhësinë e kërkuar.
Një skedar është një mjet prerës. Pamja e jashtmeështë një shufër, për prodhimin e të cilit përdoret një klasë e veçantë çeliku. Sipërfaqja e saj është gdhendur sipas një modeli të veçantë.
Në një fyell të ngushtuar në formë koni ka një plastikë ose dorezë prej druri . Ofrohet vetëm për ta bërë atë të përshtatshëm për personin që punon me mjetin. Nëse bie papritmas, mund të zëvendësohet lehtësisht me një tjetër.
Llojet e prerjeve
Për të zgjedhur skedarin e duhur, duhet të përcaktoni llojin e prerjes së aplikuar dhe konfigurimin e dhëmbëve të saj. Metoda e përdorur për aplikimin e dhëmbëve është:
- bluarje;
- shtrirje;
- prerje;
- prerje;
- duke u kthyer.
Më të njohurit sot janë skedarët me dhëmbë të prerë në makina speciale. Më shpesh, pikat janë të vetme ose të dyfishta. Prerje e vetme heq tallashin, të cilat janë të barabarta në madhësi me dhëmbët. Është shumë e vështirë të punosh me një skedar të tillë, kështu që ato përdoren kryesisht për përpunimin e metaleve të buta, drurit dhe plastikës.
Një nivel i dyfishtë formohet si rezultat i një kombinimi të kryesorit dhe ndihmës, i cili kryhet në një kënd me atë kryesor. Prerje të tilla bluajnë patate të skuqura që formohen gjatë procesit të punës. Lidhjet dhe metalet e forta përpunohen me këtë skedar.
Madhësia e dhëmbëve varet nga madhësia e pikave për 1 cm të gjatësisë së shiritit - sa më pak të jenë, aq më i madh do të jetë dhëmbi. Në varësi të madhësisë së dhëmbit instrumenti vjen nga 0 deri në 5 numra. Dhëmbët më të mëdhenj përcaktohen me numrat 0 dhe 1; ata ju lejojnë të hiqni shpejt një shtresë mjaft të madhe materiali (0,05 - 0,10 mm). Disavantazhi kryesor i një mjeti me një nivel të tillë është saktësia e ulët e pjesëve të përpunuara, që arrin në 0,1 - 0,2 mm.
Një mjet me dhëmbë të numëruar 2 dhe 3 përdoret kur është e nevojshme të hiqni një shtresë materiali prej 0,02 - 0,06 mm. Skedar me dhëmbë të dhëmbëzuar, që kanë numrat 4 dhe 5, përdoren për përfundimin e pjesëve. Saktësia e përpunimit – 0,01 – 0,005 mm. Këta dhëmbë heqin një shtresë materiali prej 0,01 - 0,03 mm, jo më shumë.
Llojet e skedarëve
Qëllimi i një mjeti është:
- Qëllimi i përgjithshëm;
- skedarë gjilpërash;
- qëllim të veçantë;
- prushi.
Skedarët për qëllime të përgjithshme përdoren kryesisht për punë metalike. Ata kanë një nivel të dyfishtë me dhëmbë të aplikuar duke përdorur metodën e prerjes. Prerjet kanë gjatësi të ndryshme (nga 100 në 450 mm), dhe dhëmbët kanë pothuajse të gjithë numrat.
Skedarët për qëllime të veçanta përdoren më shpesh në kushtet industriale, sepse ndihmon në eliminimin e shtesave të mëdha gjatë rregullimit të brazdave dhe lakimeve të ndryshme të sipërfaqeve. Në varësi të llojit të punës që do të kryhet, skedarët për qëllime të veçanta ndahen në të sheshta, me brazda, me dy skaje dhe të tjera.
Grupi më i shumtë është skedarët e gjilpërave, ka 11 lloje: të rrumbullakëta, katrore, ovale, të sheshta, gjysmërrethore, trekëndore, sharrë hekuri etj. Karakterizohen nga një gjatësi e shkurtër e shiritit dhe nivele të klasës 5. Më shpesh ato janë të pajisura me një nivel të dyfishtë. Ky skedar përdoret për të përpunuar pjesë të vogla ose vende që nuk mund të arrihen me mjete të zakonshme hidraulike.
Midis bravandreqësve vendas, ekziston një mendim se për prodhimin e ndonjë pjesë metalike Mjafton t'i jepni një skicë të përafërt - pjesa tjetër mund të finalizohet me një skedar. Së bashku me një çekiç dhe pincë, kjo mjet doreështë një nga tre asistentët më të njohur për çdo produkt shtëpiak.
Me ndihmën e tyre ju mund të kryeni një shumëllojshmëri të gjerë të punimeve në metal dhe materiale të tjera:
- Heqja e papastërtisë, korrozionit dhe veshjeve të ndryshme;
- Lëmimi i sipërfaqes, nga i ashpër deri në fund
- Dhënia e formës së kërkuar produktit;
- Heqja e gërvishtjeve dhe blicit;
- Pastrimi i kontakteve, përgatitja për lyerje;
- Mjete prerëse dhe sharruese për mprehje.
Parimi i funksionimit është shumë i thjeshtë. Duke përdorur pika në sipërfaqe (dhëmbë), hiqet një shtresë e vogël e materialit të përpunuar. Thellësia e përpunimit rregullohet nga forca e shtypjes, numri i lëvizjeve dhe shpejtësia.
Industria prodhon skedarë të panumërt dhe skedarë gjilpërash të destinuara më së shumti punime të ndryshme dhe materialet, ne do t'ju ndihmojmë të kuptoni llojet e mjeteve.
Llojet e skedarëve dhe qëllimi i tyre
Si me çdo instrument tjetër, ka dallime në dizajn, material dhe aplikim.
Madhësia e dhëmbëve
Klasifikimi më i zakonshëm i skedarëve bazohet në densitetin e dhëmbëve prerës.
Nr. 1 – nivel i madh nga 5 deri në 13 dhëmbë për 1 cm.
Mjeti është i destinuar për përpunim të ashpër dhe të ashpër. Nëse materiali është mjaft i butë, mund të prisni me siguri një shtresë të trashë në disa kalime. Punimet me aliazh të fortë janë të vështira për t'u punuar. Seriali quhet "skedarët bastard".
Nr. 2 – nivel mesatar nga 14 deri në 25 dhëmbë për 1 cm.
Lloji më i zakonshëm dhe më i gjithanshëm i mjetit. Në përpunimi klasik– ky skedar përdoret pas skedarit bastard për të lëmuar sipërfaqen. Në realitet, më shpesh puna kryhet vetëm nga ky numër.
Çdo material mund të lyhet me rërë. Metali ose druri i butë mbyll shpejt poret midis pikave; kërkohet pastrimi me një furçë teli. Seria quhet "skedarët personalë".