Pasi të keni izoluar muret e shtëpisë, në procesin e së cilës keni zgjedhur një të lirë, mund të lindë një problem që disa zona të mureve të lagështohen. Për të eliminuar pasoja të tilla negative, duhet të përdorni një membranë të përshkueshme nga avulli.
Karakteristikat e aplikimit
Procesi i izolimit të mureve dhe rregullimi i strukturave të çatisë përfshin përdorimin e filmave që vendosen nën një shtresë lesh mineral. Nëse jeni përballur me detyrën e izolimit nga brenda, atëherë është e nevojshme të siguroni një pengesë për avujt e ujit. Nuk rekomandohet përdorimi i materialit që ka vrima ose pore. Koeficienti i përshkueshmërisë së avullit të kësaj shtrese duhet të jetë minimal. Preferohet të përdoret film polietileni, i cili mund të përforcohet.
Një shtresë me fletë metalike me bazë alumini do të ishte gjithashtu e dobishme. Nuk duhet të harrojmë se kur përdorni një pengesë avulli, duhet të mendoni për praninë sistemi i ventilimit. Ekzistojnë gjithashtu filma të veçantë në shitje, mbi të cilat aplikohet një shtresë kundër kondensimit. Një membranë e tillë e përshkueshme nga avulli nuk mund të formojë kondensim në sipërfaqen e saj. Materiali zakonisht vendoset nën shtresa që janë të ndjeshme ndaj korrozionit. Këtu përfshihen fletët e galvanizuara, fletët e valëzuara dhe pllakat metalike (kjo e fundit nuk ka një shtresë të brendshme mbrojtëse).
Filmi nuk do të lejojë tymin e lagësht të arrijë në metal. Për ta bërë këtë, ka një shtresë pëlhure të përafërt në anën e pasme, e cila është e nevojshme për të mbledhur lagështi. Është e nevojshme të shtrohet filmi me veshje kundër kondensimit me anën e pëlhurës poshtë, duke u tërhequr afërsisht 2-6 cm nga shtresa e leshit mineral. Ato membrana ndërtimi që mund të lejojnë kalimin e avullit përdoren për të izoluar muret nga jashtë; ato mbrojnë materialet nga shpërthimet e erës dhe mund të instalohen në strukturat e çatisë së pjerrët. Përdorimi i tyre këshillohet edhe në fasadat e pa vulosura, kur është e nevojshme të vendoset një shtresë mbrojtëse ndaj lagështirës. Për përshkueshmërinë e avullit, filmat kanë perforime dhe pore mikroskopike. Lagështia që grumbullohet në izolimin termik duhet të kalojë përmes tyre në sistemin e ventilimit.
Llojet kryesore të membranave hidroizoluese të përshkueshme nga avujt
Ekzistojnë disa lloje të membranave të përshkueshme nga avujt. Kjo:
- material i tipit para-difuzion;
- membrana e difuzionit;
- membrana superdifuzive.
Varieteti i parë është i aftë të transmetojë rreth 300 g avullim në ditë. Ky tregues është i rëndësishëm për çdo metër katror. Nëse po flasim për koeficientin e përshkueshmërisë së avullit mund të ndryshojë nga 300 në 1000 g/m2. Për membranat superdifuzione kjo shifër i kalon 1000 g/m2. Për shkak se membranat e para-difuzionit mbrojnë nga lagështia, ato mund të përdoren nën çati si një shtresë e jashtme. Është e nevojshme të sigurohet një hendek ajri midis izolimit termik dhe filmit.
Materiale të tilla nuk mund të përdoren sepse nuk lejojnë që avulli të kalojë mirë. Në fund të fundit, kur është mjaft e thatë jashtë, pluhuri mund të futet në poret nga ventilimi. Kjo do të bëjë që filmi të ndalojë "frymëmarrjen" dhe kondensimin të vendoset në shtresën izoluese.
Shqyrtime të membranës së përshkueshme nga avulli
Membrana e përshkueshme nga avulli duhet të instalohet duke përdorur një teknologji të veçantë. Nëse po flasim për një membranë difuzioni ose superdifuzioni, atëherë poret janë mjaft të mëdha, kështu që ato do të bllokohen shumë shpejt. Kjo kërkon një hendek ajri për ventilim në anën e poshtme. Sipas përdoruesve, ju nuk duhet të shqetësoheni me instalimin e mbështjellësit dhe kundër-skutës. Në shitje mund të gjeni jo vetëm filma të difuzionit, por edhe shumëllojshmërinë e tyre vëllimore. Siç theksojnë blerësit, shtresa e ventilimit ndodhet brenda. Falë kësaj, kondensimi nuk është në gjendje të depërtojë brenda çatisë metalike. Parimi i funksionimit të këtij materiali është i njëjtë me atë të filmit kundër kondensimit. Megjithatë, ka edhe dallime. Siç theksojnë mjeshtrit e shtëpisë, membrana pjesa më e madhe është e aftë të heqë lagështinë nga izolimi. Në fund të fundit, nëse mbulim metalik ka një pjerrësi të lehtë që varion nga 3 në 15 °, atëherë kondensimi nga ana e poshtme nuk do të jetë në gjendje të rrjedhë poshtë. Do të dëmtojë veshjen e galvanizuar dhe gradualisht do ta shkatërrojë plotësisht.
Si të instaloni membranën - në pjesën e brendshme ose të jashtme të izolimit?
Një membranë hidroizoluese e përshkueshme nga avulli duhet të instalohet sipas një metode të caktuar. Nëse është e nevojshme të izoloni termikisht fasadën, atëherë duhet të vendoset filmi për heqjen e avullit jashtë. Ndërsa nëse çatia do të izolohet, atëherë sipër leshit mineral vendoset një film me një shtresë kundër kondensimit të një lloji vëllimor ose difuzion. Në këtë rast, është e nevojshme të ndiqet teknologjia që përdoret në rregullim.Nëse çatia nuk ka izolim, atëherë shtresa e filmit duhet të vendoset poshtë, nën mahi. Kur izoloni termikisht katin e sipërm të dhomave nën papafingo, një membranë e përshkueshme nga avulli duhet të vendoset nën izolim. Duhet të përdoret gjithashtu një membranë hidroizoluese e përshkueshme nga avujt kur izolim i brendshëm muret Në këtë rast nuk duhet të ketë vrima, por duhet të vendoset sipër leshit mineral, brenda dhomës.
Si të vendosni membranën - brenda jashtë apo me fytyrë poshtë?
Siç tregon praktika, për shumë njerëz mbetet një mister se cila anë të vendoset membrana e përshkueshme nga avulli. Nëse filmi ka të njëjtat anët e pasme dhe të përparme, atëherë çështja hiqet menjëherë. Sidoqoftë, nuk është gjithmonë e mundur të gjesh filma të dyanshëm në shitje. Nëse po flasim për varietetin kundër kondensimit, atëherë do të ketë një anë pëlhure në brendësi, dhe gjatë instalimit duhet të përballet me pjesën e brendshme të dhomës. Këtu duhet të aplikohet edhe veshja metalike në membranën e fletës.
Nëse keni blerë një membranë difuzioni të përshkueshme nga avulli, atëherë duhet të lexoni udhëzimet. Në të, prodhuesi zakonisht tregon teknologjinë për shtrimin e materialit. Megjithatë, e njëjta kompani mund të prodhojë filma të njëanshëm dhe të dyanshëm. Ju mund të identifikoni anët e jashtme dhe të brendshme sipas ngjyrës. Nëse membrana ka dy anë, atëherë njëra prej tyre është pikturuar në një hije më të ndritshme, zakonisht kjo është ana e jashtme e materialit.
Si të zgjidhni një membranë
Nëse keni nevojë për një membranë rezistente ndaj lagështirës nga era, e përshkueshme nga avujt, atëherë mund t'i kushtoni vëmendje opsionit më të blerë nga klientët, "Izospan A", i cili është projektuar për instalim në hapësirën nën çati. Përdoret për të mbrojtur elementët e mureve dhe çatisë nga kondensimi dhe era gjatë ndërtimit të ndërtesave. Membrana duhet të vendoset nën çatinë ose veshjen e murit në pjesën e jashtme të izolimit. Ana e jashtme është një sipërfaqe e lëmuar e papërshkueshme nga uji, ndërsa ana e brendshme ka një strukturë të ashpër kundër kondensimit. Është projektuar për të mbajtur lagështinë me avullimin e mëvonshëm në rrjedhën e ajrit. Kjo membranë e papërshkueshme nga era, e përshkueshme nga avulli është e lehtë për t'u përdorur, e karakterizuar nga forca e lartë mekanike dhe siguria mjedisore. Nuk ka substanca të dëmshme në avujt, dhe vetitë e materialit mund të ruhen për një kohë të gjatë. Materiali është rezistent ndaj baktereve dhe kimikateve.
Karakteristikat e shtrimit të materialit "Izospan A"
Membrana e përshkueshme nga avujt e erës "Izospan A" përdoret si një membranë e papërshkueshme nga era kur instaloni çatitë e izoluara termikisht, këndi i së cilës nuk duhet të jetë më i vogël se 35 °. Fletët e profilizuara ose herpes bitumi mund të përdoren si mbulesë e jashtme.
Karakteristikat e membranës Megaflex
Keni nevojë për një membranë të përshkueshme nga avulli? Cili është më i mirë, duhet të vendosni përpara se të vizitoni dyqanin. Një lloj i materialeve të tilla është "Megaflex", i cili është një strukturë me tre shtresa. Dy shtresat e jashtme janë mikro-shpuar dhe shtresa e brendshme është film i përforcuar. i japin materialit forcë, ndërsa petëzimi i dyanshëm siguron veti hidroizoluese.
Materiali ka mikro-perforim, i cili garanton ajrosjen e avullit të ujit që vjen hapësirat e brendshme. Kjo membranë e papërshkueshme nga lagështia, e përshkueshme nga avujt është në gjendje të mbrojë hapësirën nën çati nga lagështia, pluhuri dhe bloza dhe të mbrojë materialet nga lagështia e jashtme dhe kondensimi i brendshëm. Nëse mbrojtja nga era është e nevojshme, atëherë duhet të përdorni varietetin Megaflex D 110 Standard, i cili shtrihet në panele horizontale me një mbivendosje prej 15 cm.
konkluzioni
Një membranë hidro-erë, e përshkueshme nga avujt, e cila mbron materialet nga lagështia, era dhe avujt, duhet të jetë e pranishme në çatitë e izoluara dhe fasadat e ajrosura. Në rastin e parë, hendeku krijohet duke ndërtuar një kundër-grilë, ndërsa gjatë izolimit të fasadës, hendeku mund të merret duke vendosur profile ose rafte horizontale.
Kompania Döcke Extrusion ofron membrana superdifuzione universale për instalimin e çatisë dhe përfundimin e fasadave.
Membranat D-folie (A150, A 125, A100)
Membrana superdifuzione me tre shtresa hidro-rezistente ndaj erës për çatitë me pjerrët dhe fasadat e ajrosura, të përbëra nga një kombinim filmash me rezistencë të lartë dhe të përshkueshëm nga avujt e bazuar në material jo të endura polipropileni. Ata heqin në mënyrë efektive avullin, nuk lejojnë që uji të kalojë dhe nuk fryhen nga era. Membranat e superdifuzionit vendosen direkt në izolim, gjë që thjeshton dhe shpejton shumë instalimin.
Falë përshkueshmërisë së lartë të avullit (nga 3000 g/m² në ditë), lagështia e mbetur e izolimit dhe e mahijeve hiqet me siguri nga struktura e çatisë në mjedisin e jashtëm.
Materiali ka rezistencë të lartë në tërheqje kur fiksohet me një gozhdë çatie. Membranat superdifuzive D-folie (A150, A125, A100) mund t'i rezistojnë rrezatimit UV deri në tre muaj pa humbur cilësitë e tyre. Kjo bën të mundur shtrimin e çatisë dhe mbylljen e fasadës me vonesë.
Filmat me pengesë avulli D-folie (B90, BR+)
Filmat D-Folie (B90, BR+) përdoren si një shtresë penguese e avullit në struktura: çatitë e izoluara të pjerrëta, muret e kornizës, mure me izolim te jashtem, fasada te ajrosura, papafingo dhe tavanet ndërdyshe. Ata parandalojnë depërtimin e ajrit të ngrohtë dhe të lagësht nga dhoma në izolim.
Përveç kësaj, filmat D-Folie BR+, për shkak të pranisë së një shtrese reflektuese, reduktojnë humbjen e nxehtësisë, krijojnë një ekran shtesë izolues dhe reflektojnë nxehtësinë. Kjo arrin një efikasitet më të madh pajisjet e ngrohjes, kostot e energjisë dhe karburantit janë ulur.
Aplikimi i membranave superdifuzione dhe filmave pengues të avullit D-Folie
Aplikimi i membranave superdifuzive D-folie (A150, A125, A100) dhe filma pengues të avullit D-Folie (B90, BR+) do të ndihmojë në mbrojtjen e shtëpisë tuaj nga probleme të tilla si:
- rrjedhje në çati;
- nxjerrja e nxehtësisë nga izolimi, humbja e vetive të tij të izolimit termik;
- hyrja e avullit nga ambientet e banimit, mbytja e izolimit me humbjen e vetive të tij;
- shfaqja e mykut dhe mykut të rrezikshëm për shëndetin e njeriut;
- kalbja e parakohshme dhe shkatërrimi i strukturave mbështetëse.
Përparësitë
- Jo përmes vrimave;
- Tre shtresa, të salduara me ultratinguj;
- Jo i fryrë;
- Nuk lejon që uji të kalojë;
- Heqja efektive e avullit;
- Mund të shkelësh në këmbë;
- Vendoset direkt në izolim.
Membranat tradicionale përbëhen nga një pëlhurë me një shtresë të krijuar nga ndërthurja e fijeve të hollë plastike për të formuar kalime të ngushta nëpër të cilat uji depërton vetëm në formën e avullit. Membrana të tilla quhen spunbond bazuar në teknologjinë e tyre të prodhimit. Membranat e këtij lloji nuk pengojnë kalimin e avullit nëpër to dhe mund të fryhen nga era.
Membranat D-folie me tre shtresa superdifuzion funksionojnë ndryshe. Dy shtresat e jashtme janë lidhëse klasike, duke siguruar forcë dhe mbrojtje ndaj rrezeve ultraviolet.
Shtresa qendrore është një film polipropileni, i cili përmban një substancë të veçantë që lejon filmin të përçojë molekulat e avullit duke mbetur i papërshkueshëm nga uji dhe era.
Aftësia për të vendosur filmin drejtpërdrejt në izolim pa kundër-grilë shtesë, thjeshton ndjeshëm dhe përshpejton instalimin.
Membranat superdifuzive D-Folie mund të përballojnë rrezatimin UV deri në tre muaj pa humbur cilësitë e tyre, gjë që bën të mundur shtrimin e çatisë me vonesë.
Avantazhet ndaj spunbonds
Rritja e efikasitetit të përshkueshmërisë së avullit është një garanci e izolimit të thatë, pavarësisht nga kushtet e jashtme.
Humbje e reduktuar e nxehtësisë - membranat D-folie nuk lejojnë që era të kalojë, e cila mbart një pjesë të madhe të nxehtësisë.
Konsistenca e vetive të funksionimit me kalimin e kohës - nuk ka bllokim të poreve (kapilarëve) dhe një ulje të përshkueshmërisë së avullit, si me membranat tradicionale.
Aftësia për të vendosur membranat D-folie direkt në izolim thjeshton strukturën e çatisë dhe zvogëlon kostot e punës gjatë instalimit.
Membranat D-folie prodhohen në Evropë, në një objekt të çertifikuar sipas standardeve evropiane. Membrana të ngjashme eksportohen në vende të tilla si Gjermania, Franca dhe Britania e Madhe.
Çmimi atraktiv për një produkt të gjeneratës së re.
Llogaritja e përçueshmërisë termike të materialit duhet të bëhet duke marrë parasysh faktin se ajri brenda vetë izolimit është i thatë dhe i palëvizshëm. Rekomandime të tilla janë të përfshira në Kodin e Praktikës "Projektimi i Mbrojtjes Termike të Ndërtesave" (klauzola 8.14):
"Kur projektoni mure me një boshllëk ajri të ventiluar (mure me fasadë të ventiluar), duhet të ndiqen rekomandimet e mëposhtme: përdorni të ngurtë materialet termoizoluese me një dendësi prej të paktën 80 - 90 kg/m3, me filma të përshkueshëm nga avujt rezistent ndaj erës në anën përballë shtresës së brendshme...”
Sipas llogaritjeve nga TsNIIPROMZDANIY (Moskë), kur përdorni izolim pa një membranë kundër erës, përçueshmëria e tij termike rritet 4 herë. Nëse të gjithë këta faktorë nuk merren parasysh, kjo do të çojë në faktin se llogaritja e izolimit termik do të jetë e gabuar, dhe pasojat do të jenë katastrofike.
Membranat D-folie të superdifuzionit (A150, A125, A100) do të ndihmojnë në shmangien e këtyre problemeve, të cilat rrisin ndjeshëm efikasitetin energjetik të dizajnit të izolimit. Ato janë të papërshkueshme nga era, gjë që parandalon që nxehtësia të dalë nga izolimi, duke ulur kështu kostot e ngrohjes së shtëpisë.
Izospan është një material ndërtimi jo i thurur që përdoret për izolimin e banesave dhe ambiente jo banesore. Përveç kësaj, është e nevojshme për mbrojtje nga lagështia dhe uji. Kjo është veçanërisht e rëndësishme kur krijoni një plan shtëpie me një papafingo dhe një garazh, i cili duhet të izolohet siç duhet me ujë dhe nxehtësi.
Lexuesi do të mësojë në këtë artikull se cilat lloje të isospan ekzistojnë dhe cilat avantazhe ka ky material.
Izospan: karakteristikat e materialit
Filmi Isospan tani është shumë i zakonshëm në tregun e ndërtimit. Përdoret si shtresa e parë penguese gjatë instalimit të izolimit: parandalon hyrjen e lagështirës në shtresën kryesore termoizoluese të shkumës së polistirenit ose izolimit tjetër. Materiali përbëhet nga polipropileni i pastër, është plotësisht sintetik dhe për këtë arsye nuk thith plotësisht ujin. Kur krijoni një plan izolimi, isospan duhet të merret parasysh në punë.
Kujdes! Izospan njihet si një material shumë efektiv për izolimin e papafingove, garazheve dhe ndërtesave njëkatëshe.
Një papafingo është një hapësirë papafingo që mund të përdoret për ruajtje ose si hapësirë banimi. Vetë çatia bëhet muret e kësaj dhome, të cilat duhet të jenë të izoluara mirë. Izospan izolon dhe mbron nga lagështia dhe era, duke ruajtur temperaturë të rehatshme brenda papafingo dhe në të gjithë shtëpinë.
Në mënyrë të ngjashme, veshja isospan përdoret për izolimin e garazheve dhe ambienteve të tjera jo-rezidenciale njëkatëshe:
- mbron metalin nga korrozioni, druri nga kalbja;
- parandalon shfaqjen e kondensimit dhe njomjes së izolimit, gjë që zvogëlon vetitë e izolimit termik;
- pasqyron rrjedhat e ajrit, duke mbrojtur dhomën nga ftohja dhe rrymat;
- ruan një temperaturë të qëndrueshme të brendshme dhe nuk lëshon nxehtësi.
Përparësitë e mëposhtme të isospan mund të theksohen:
- i papërshkueshëm nga uji;
- të qëndrueshme dhe miqësore me mjedisin (nuk lëshon papastërti të dëmshme);
- ka elasticitet të lartë;
- mbron nga rrezatimi ultravjollcë;
- mbron nga era;
- nuk lëshon, reflekton nxehtësinë;
- i reziston presionit të lartë;
- të qëndrueshme (zgjat rreth 50 vjet);
- ruan vetitë e tij në rangun nga minus 60 në plus 80 gradë Celsius.
Për sa i përket krijimit kushte komode brenda ambienteve të banimit luan isospan rol i rendesishem, veçanërisht kur rregulloni një shtëpi me një papafingo, një garazh dhe zgjerime të tjera njëkatëshe në klimën ruse.
Llojet e materialit, karakteristikat e tyre teknike
Në ditët e sotme, prodhuesit me cilësi të lartë krijojnë polipropilen dhe film të pastër prej tij duke përdorur pajisje teknologjike, duke kontrolluar cilësinë e prodhimit. Kompanitë vendase po hapen në Rusi që ofrojnë materiale ndërtimi që janë të ngjashme në cilësi me kompanitë e huaja dhe më të favorshme në çmim.
Kur zgjidhni produkte, duhet të përqendroheni nëse isospan ka certifikata të cilësisë dhe sigurisë. Prodhuesit e famshëm koordinojnë planet e tyre të prodhimit me kërkesat ligjore.
Në ditët e sotme, gjatë përfundimit të shtëpive dhe ambienteve jo-rezidenciale, përdoren 4 modifikime kryesore të isospanit, të cilat kanë karakteristikat e tyre.
Izospan A
Ky është një film (membranë) që izolon në mënyrë të përsosur ujin dhe ndihmon në eliminimin e lagështirës dhe avullit të tij nga izolimi. Ky modifikim përdoret për të mbrojtur kundër erës dhe ujit dhe rrit jetën e shërbimit të izolimit. Përdoret për izolimin e shtëpive private, papafingo, garazhe dhe çdo ambient tjetër.
Ky isospan është rezistent ndaj stresit dhe presionit mekanik, plotësisht neutral ndaj ndikimeve biologjike (myk, baktere, etj.). Mund të shtrihet:
- gjatësore me 190 mm;
- në mënyrë tërthore me 140 mm.
Materiali është i fiksuar në pjesën e jashtme të izolimit si një pengesë shtesë. Për shembull, kur izoloni një papafingo, ajo është montuar në çati me shirita të gjerë të mbivendosur.
E rëndësishme! Sipërfaqja e lëmuar duhet të mbetet jashtë, vetë filmi nuk duhet të bjerë në kontakt me materialin izolues. Përndryshe, isospan nuk do të jetë në gjendje të izolojë siç duhet dhomën dhe izolimin.
Është e nevojshme që membrana të shtrihet e sheshtë dhe të mos dalë jashtë, të fryhet ose të bjerë. Izospan A është i siguruar me rrasa druri dhe gozhdë.
Izospan A mund të shihet në foto:
Izospan B
Ky modifikim bllokon në mënyrë të përkryer rrugën e avullit të ujit, gjë që eliminon impregnimin e izolimit me avull.
E rëndësishme! Kur krijoni një plan urbanistik të garazhit, kjo mund të jetë shumë e rëndësishme për të siguruar që të mos ketë rritje të lagështisë në zonën ku është ruajtur automjeti.
Izospan B është me dy shtresa, përdoret:
- Në çatitë e ngritura.
- Në mure: të jashtëm dhe të brendshëm.
- Për të ruajtur dyshemetë në bodrum, papafingo (papafingo).
- Në garazhe dhe ambiente të tjera jo-banesore.
Indeksi i përshkueshmërisë së avullit është 7, materiali gjithashtu mund të shtrihet: në drejtimin gjatësor me 130 mm, në drejtim tërthor me të paktën 107 mm.
Çdo shtresë e këtij materiali ka funksionet e veta:
- shtresa e lezetshme ruan lagështinë dhe kondensimin;
- Pjesa e lëmuar ju lejon të rregulloni fort filmin me izolim.
Ndryshe nga modifikimi i mëparshëm, isospan B është ngjitur në brendësi të izolimit. I fiksuar nga poshtë lart dhe i mbivendosur. Në mënyrë që filmi të kapë avujt dhe kondensimin, duhet të ketë një hapësirë të lirë prej të paktën 5 cm mbi shtresën e lezetshme.
Pamja e paketimit të isospan B mund të shihet në foto:
Izospan S
Ai gjithashtu përbëhet nga dy shtresa, por përdoret për të mbrojtur një çati të paizoluar, dysheme midis kateve dhe izolimin e dyshemesë. Ka forcë të lartë.
Filmi përdoret për izolimin e avullit dhe ujit:
- çati të paizoluara të pjerrëta ose të sheshta;
- kornizë, mure mbajtëse;
- dysheme druri, e vendosur paralelisht me dyshemenë;
- dysheme betoni.
- Instalimi i kulmeve (shpateve) jo të izoluar kryhet me një mbivendosje (me një thellësi prej rreth 15 cm), dhe gjithashtu sigurohet duke përdorur rrasa druri. Kur rregulloni papafingo të një shtëpie, ky material izolon në mënyrë të përkryer dhomën nga lagështia që hyn mjedisi.
- Nëse flasim për dysheme druri, atëherë filmi është ngjitur drejtpërdrejt në izolim me një hapësirë të vogël të lirë nga dyshemeja (4-5 cm).
- Kur izoloni një dysheme betoni, isospan S vendoset direkt në dysheme dhe shtrëngohet mbi të.
Izospan C mund të shihet në foto:
Izospan D
Ky modifikim është shumë i qëndrueshëm dhe mund të përballojë presionin dhe ngarkesat e larta. Përdoret për përfundimin e çatisë. Për sa i përket hidroizolimit dhe mbrojtjes nga kondensimi, ai mund t'i rezistojë edhe kores së madhe të borës në vetvete.
E shkëlqyeshme për rregullimin e papafingo të një shtëpie ose garazhi në rajone me reshje të mëdha dëbore. Materiali mbron strukturat prej druri dhe çatitë jo të izoluara. Izospan D është i izoluar me:
- çati të sheshta dhe me pjerrësi;
- dysheme dhe tavane betoni në nivelin e bodrumit të shtëpisë.
Forca e lartë e filmit ju lejon të mbroni hapësirën e banimit nga era dhe lagështia, edhe në rastet kur çatia lejon që lagështia të kalojë.
Ai është montuar gjithashtu i mbivendosur horizontalisht në shirita, të siguruara në mahijet e çatisë së shtëpisë duke përdorur rrasa. Instalimi në një dysheme betoni është i ngjashëm me modifikimin e mëparshëm të isospan, sepse në shumë mënyra isospan C dhe D janë të ngjashëm në karakteristikat e tyre.
Izospan D mund të shihet në foto:
Ndryshimet kryesore janë përshkruar më sipër material për ndërtim, ka edhe varietete të këtyre modifikimeve që kanë dendësi të ndryshme ose cilësi shtesë, për shembull, aditivë retardantë ndaj zjarrit, të cilët japin më shumë Siguri nga zjarri dhe mbrojeni nga zjarri.
Prodhuesit gjithashtu morën kohë për të krijuar shtesë Furnizimet, të cilat ju lejojnë të izoloni qepjet dhe dëmtimet e vogla. Po flasim për shirita isospan - këto shirita ngjitës ju lejojnë të izoloni linjat e qepjeve dhe sipërfaqet e pabarabarta. Mjaftueshem per sipërfaqe pune ishte e thatë dhe e pastruar - shirit ngjitës isospan FL, SL do të sigurojë papërshkueshmëri të mirë të vendeve të tilla. Ekziston edhe një shirit i metalizuar që ka një vlerësim të lartë të qëndrueshmërisë.
Pika të rëndësishme për instalimin e isospan
Udhëzimet për përdorimin e isospan përfshijnë pikat e mëposhtme:
- Duke e shtrirë material izolues nuk kërkon ndonjë njohuri të veçantë, mund të bëhet me duart tuaja, duke marrë parasysh karakteristikat individuale membranat.
- Kompleti i shitjes shoqërohet gjithmonë me udhëzime, të cilat duhet të lexohen me kujdes dhe të veprojnë sipas udhëzimeve. Për shembull, nëse rregulloni isospan ana e kundërt, atëherë e gjithë puna do të jetë e pakuptimtë - nuk do të ndodhë asnjë izolim.
- Mbërthimi në dru bëhet duke përdorur një stapler; nuk duhet të harroni për vulosjen e qepjeve dhe çarjeve të mundshme duke përdorur shirit isospan.
- Kur instaloni një film izolues të nxehtësisë, pjesa e metalizuar duhet të përballet me pjesën e brendshme të dhomës, dhe vetë puna e instalimit kryhet nga fundi në fund, pa mbivendosje. Qepjet janë gjithashtu të vulosura.
Izospan ju lejon të bëni jetën në shtëpinë tuaj të rehatshme dhe të ngrohtë. Përdorimi i këtij filmi në bodrum ose papafingo zgjat jetën e shërbimit sistem mahi, dysheme druri, krijon një mikroklimë të qëndrueshme në ambientet e banimit. Izolimi i garazhit nga lagështia dhe kondensimi ju lejon të bëni dhomën të thatë dhe të sigurt për veshjen metalike të makinës dhe pajisjeve të tjera.
Teknologjitë moderne thjeshtojnë shumë rregullimin e shtëpisë tuaj. Duke iu qasur çështjes me përgjegjësi, çdo person do të jetë në gjendje të shmangë problemet në shtëpinë e tij për një kohë të gjatë!
Kur ndërtojmë ndonjë dhomë, një nga detyrat kryesore është rregullimi i çatisë në mënyrë që të mos rrjedhë. Ky problem është shumë i mprehtë në ato vende ku sasia e reshjeve tejkalon mesataren statistikore.
Reshjet, uji që formohet kur bora dhe akulli shkrihen, mund të rrjedhin poshtë mbulesë çatie dhe shkatërrojnë atë dhe sistemin e izolimit. Për të parandaluar që kjo të ndodhë, përdoret një membranë difuzioni. Tani do të përpiqemi të kuptojmë ndërlikimet e instalimit të një çati membranore.
Relativisht kohët e fundit, një membranë difuzioni filloi të përdoret gjatë instalimit të çatisë. Më parë, më shpesh përdoreshin filma të ndryshëm, por përdorimi i tyre nuk zgjidhi të gjitha problemet e izolimit të lagështirës. Përdorimi i një membrane speciale për çati promovon ajrosje të shkëlqyer të çatisë, duke lëshuar avull, por duke mos e lejuar atë të arrijë në çati.
Karakteristikat dalluese të membranës:
- strukturë e qëndrueshme;
- disa shtresa;
- përshkueshmëri e shkëlqyer e avullit;
- Cipë volumetrike, e përdorur për çati me veshje zinku, çeliku, bakri dhe alumini, pasi kjo lloj çati është e prirur ndaj ndryshkut.
Shtresat në një membranë difuzioni më së shpeshti bëhen duke përdorur një material të tillë si propileni i pa endur, ndërsa shtresa e mesme është rezistente ndaj tensionit dhe shtresat e jashtme karakterizohen si mbrojtje kundër dëmtimit.
Në prodhimin e membranave të difuzionit, shtresat lidhen me njëra-tjetrën duke përdorur ultratinguj, falë të cilave arrihen vetitë e nevojshme të konsumit. Materiali nga i cili janë bërë membranat e çatisë nuk lëshon tym të dëmshëm dhe nuk ndikohet nga kërpudhat dhe bakteret.
Mbrojtja nga avulli është një nga parametrat e rëndësishëm që karakterizon një membranë difuzioni. Sipas këtij parametri, ato ndahen në tre lloje:
- Përshkueshmëria e avullit varion nga treqind deri në katërqind miligramë për metër katror. Ky material përdoret për të mbrojtur ndarjet e brendshme.
- Përshkueshmëria e avullit nga katërqind deri në një mijë miligramë për metër katror, e përdorur në rajone me klimë mesatare dhe të butë.
- Përshkueshmëria është më e lartë se një mijë miligramë për metër katror, më së shpeshti përdoret për lagështi të lartë, ndryshime të papritura të temperaturës ose izolim të trashë.
Karakteristikat e membranës
Shërben si mbrojtje për izolimin nga depërtimi i lagështirës. Shtresat e brendshme dhe të jashtme të membranës janë të lyera ngjyra të ndryshme për të mos i ngatërruar kur punë instalimi, pasi kjo mund të çojë në funksionimin e tij jo të duhur dhe përfundimisht në vdekjen e izolimit.
Karakteristikat e agjentit hidroizolues
Ky lloj membrane difuzioni përbëhet nga një grilë strukturore tre-dimensionale, e cila bazohet në një mbështetje propileni jo të endur. Përparësitë e tij:
- aplikim në veshje metalike;
- ventilim i vazhdueshëm me dy drejtime;
- shkarkim efikas i kondensatës;
- përdorim në ndërtimin e çatisë me shumë nivele.
Membranat e difuzionit: llojet dhe treguesit
Në prodhimin e këtij produkti përdoret material jo endur, me aditivë të ndryshëm që sigurojnë strukturën e tij të qëndrueshme, përbëhet nga shumë shtresa, Ajo ka lloje te ndryshme fiksimet, ndryshon në metodën e instalimit:
- I njëanshëm. Shtrirja në njërën anë pingul me mahi, në një nga sipërfaqet.
- Dyaneshem. Shtrirë në të dyja anët.
Llojet e membranave difuzive
Le të shqyrtojmë llojet e membranave të difuzionit:
- TyvekSolid është një membranë difuzioni me hidroizolim dhe izolim nga era, e përbërë nga një shtresë e vetme polietileni jo të endur. Dallohet për mbrojtjen e shkëlqyer të avullit gjatë gjithë periudhës së përdorimit. Është i lehtë dhe shtrihet mirë, dhe është gjithashtu rezistent ndaj grisjeve. Përdoret për shumë lloje çatish, që përdoren për ajrosjen e tyre, për mbrojtjen termoizoluese të mahijeve, për veshje metalike, për të mbrojtur fasadat e veshura me materiale të ndryshme, Për strukturat prej druri, në këtë rast nuk kërkojnë trajtim shtesë me kimikate.
- sh.a 115 TechnoNIKOL. Ky lloj Membrana ka një strukturë me tre shtresa dhe bazohet në polietileni. Përdoret kryesisht për të mbrojtur bazën e çatisë nga ajri i lagësht, i ftohti dhe kondensimi. Fusha e aplikimit: dhoma të ajrosura, çati të pjerrëta jo të izoluara, material për çati, fletë pllakash, pllaka qeramike dhe polimer.
- Isopsan - përbëhet nga tre shtresa, ka mbrojtje të shkëlqyer nga era, lagështia dhe avulli. Përdoret në rastet kur është e nevojshme të mbrohen materialet izoluese, muret dhe strukturat e çatisë nga ndikimet e padëshiruara mjedisore. Kryesisht është montuar drejtpërdrejt në izolim, gjë që zvogëlon koston e instalimit të tij, pasi në këtë rast nuk ka nevojë për instalim shtesë të mbështjelljes për një hendek të ventiluar. Vetitë e shkëlqyera rezistente ndaj lagështirës së këtij materiali lejojnë që ai të përdoret në çdo kohë të vitit.
- Ondutis SA 115 dhe SA 130 janë një lloj i ri i membranës difuze, zona e aplikimit të saj është zona me një klimë të lagësht ose të ashpër, pasi dallohet nga përshkueshmëria e shkëlqyer e avullit prej mbi një mijë miligramë për metër katror në ditë. Quhet super difuzion, mbron në mënyrë të përsosur izolimin dhe strukturën e çatisë. Ondutis mund të përdoret gjithashtu si çati përpara instalimit materialet e çatisë deri në gjashtëdhjetë ditë.
- Dorken Delta-Vent N. Ky material përballon mirë heqjen e lagështirës nga nën çatinë e dhomës. Kjo e mban strukturën e përgjithshme të thatë. Kjo membranë e difuzionit vëllimor është mjaft e qëndrueshme; ajo formon mbrojtje për shtresën e izolimit termik nga insektet që hyjnë në të. Dorken Delta-Vent N ka një sërë përparësish: një nivel i lartë i forcës së shtresës së poshtme (plotësisht i mbrojtur nga dëmtimet e ndryshme), ky material ka një jetëgjatësi të madhe shërbimi, shtresa e jashtme është plotësisht e papërshkueshme nga uji (ky film difuzion jo vetëm që parandalon depërtimi i lagështisë, por edhe i reziston reshjeve të mëdha), një nivel i lartë i përshkueshmërisë së avullit, pa shkëlqim nga dielli, mbrojtje e shkëlqyer e erës dhe rezistencë ndaj rrezeve ultravjollcë. Këto nuk janë të gjitha avantazhet e këtij lloji të membranës. Zona e aplikimit - çati e ngritur me hendek ventilimi të vetëm ose të dyfishtë. Ky lloj përdoret gjithashtu për fasadat e ventiluara dhe strukturat e mureve të kornizës.
- Fakro Eurotop. Ky lloj ndahet në disa lloje, me shtrirje të ndryshme aplikimi. Ato përdoren për çatitë që kanë një kënd standard të pjerrësisë. Filmi me shumicë mund të instalohet në krye të izolimit. Fakro Eurotop heq avullin nga shtresa termoizoluese. Ky film siguron mbrojtje të plotë të hapësirës nën çati nga ngarkesat e ndryshme të lagështirës dhe erës.
Karakteristikat dalluese të llojeve të membranës difuzive
Të gjitha membranat e difuzionit hidroizolues kanë të tyren tipare dalluese. Le të shohim se si ndryshojnë ato:
- Ato ndryshojnë nga njëri-tjetri për sa i përket përshkueshmërisë së avullit.
- Ka dallime në rezistencën në tërheqje.
- Lloje të ndryshme çatish nxehen në diapazon të ndryshëm, kështu që vetëm një lloj i caktuar filmi difuzioni është i përshtatshëm për çdo shtresë.
- Dendësia dhe lloji janë gjithashtu të ndryshme për të gjitha speciet. Membrana të ndryshme difuzioni kanë baza të ndryshme (polipropileni ose polietileni).
Forca e materialit varet nga dendësia. Nëse dendësia është e lartë, atëherë forca është gjithashtu e lartë.
- Aftësia për të përballuar presionin e kolonës së ujit.
- Çdo lloj specifik ka jetën e vet të shërbimit.
- Ato ndahen në membranat e difuzionit "frymëmarrës" dhe "jo-frymëmarrës". Ato që nuk marrin frymë janë shumë më të lira në krahasim me ato që nuk marrin frymë. Sidoqoftë, lloji i parë nuk është i përshtatshëm për të gjitha llojet e çatisë. Në fund do të shpenzoni tuajat para të gatshme për procedurat e tjera. Përveç parave, do të shpenzoni shumë kohë dhe përpjekje. Nëse çatia ka dizajn kompleks, atëherë filmi "jo-frymëmarrës" nuk do të jetë në gjendje të sigurojë rrjedhën e kërkuar të ajrit në boshllëqet e ventilimit.
Ju nuk mund të kurseni para duke zgjedhur këtë material.
Karakteristikat e instalimit të një membrane difuzioni
Kur instaloni një membranë difuzioni, duhet të ndiqen rregullat e mëposhtme:
- Është shtrirë në dysheme, paralel me strukturën e kornizës.
- Forcohet me stapler, duke filluar nga shtresa e sipërme.
- Shiritat mbivendosen me njëra-tjetrën me një mbivendosje prej pesë ose shtatë centimetrash.
- Kryqëzimet e rrotullave janë ngjitur së bashku me ngjitës të veçantë.
- Për të siguruar izolimin e lagështisë, vendi i instalimit të shtrojës mbulohet me shirit mbyllës.
- Në ato vende ku ka një dalje të oxhakut, membrana është instaluar me një diferencë prej dhjetë centimetra mbi çatinë, skajet përforcohen me një shirit ngjitës të veçantë dhe prerjet e qosheve përpunohen në të njëjtën mënyrë.
Sa do të kushtojë instalimi i një membrane çati?
Duhet mbajtur mend se kostoja e izolimit të lagështisë së çatisë është, në varësi të materialit të përdorur, mesatarisht tre përqind e kostos së të gjithëve. punimet e çatisë. Në këtë rast, kursimet e tepërta do të ndikojnë cilësitë e performancësçatia, jeta e tij e shërbimit. Kostoja e vlerësuar e një membrane difuzioni përfshin disa komponentë, këto janë:
- sipërfaqja totale e çatisë;
- materiali i përdorur;
- vendndodhja e instalimit;
- kompani prodhuese.
Membranat e difuzionit shiten më shpesh në rrotulla, por disa prodhues shesin membranat në bazë të zonës së kërkuar, domethënë me kuadraturë. Pra, çmimi i materialit Tyvek Solid është rreth katër mijë rubla për rrotull, dhe për TechnoNIKOL jtd do të duhet të paguani dyzet e tre rubla, por vetëm për një metër katror.
Fundi
Përmblidhni. Në këtë rast, nuk mund të kurseni në zgjedhje materiali i kërkuar. Zgjedhja e një membrane difuzioni duhet të trajtohet me seriozitetin më të madh. Kur blini një film difuzioni, duhet t'i kushtoni vëmendje karakteristikave të mëposhtme: përshkueshmëria e avullit, forca në tërheqje, dendësia dhe lloji, aftësia për t'i bërë ballë efekteve të një kolone uji, jeta e shërbimit. Për më tepër, konsultohuni me shitësin tuaj të materialeve të ndërtimit.
Membranat e difuzionit lejojnë që avulli të kalojë, të mbajë rrjedhën e ujit dhe ajrit dhe të sigurojë mbrojtje për izolimin dhe përbërësit e brendshëm të mureve dhe çatisë. Ky material redukton humbjen e nxehtësisë nga byreku i çatisë. Nëse po instaloni një hapësirë çati dhe çatia nuk është ende gati, atëherë një membranë difuzioni mund ta zëvendësojë atë për dy ose tre muaj. Ky material është i përsosur në zonat ku ka një sasi të madhe reshjesh dhe ku mbizotëron një klimë shumë e ashpër.
Neni nr 3982386
Barriera universale e hidro-avullit FasadPro D është një material me dy shtresa i papërshkueshëm nga lagështia, i bazuar në pëlhurë të endur polipropileni me rezistencë të lartë. Përdoret në ndërtim për të mbrojtur strukturën e ndërtesës nga depërtimi i avullit të ujit, kondensimit dhe lagështisë.
Forca e lartë e materialit FasadPro D e lejon atë të përballojë forca të konsiderueshme mekanike gjatë procesit të instalimit.
Për shkak të forcës së tij të lartë, mund të përballojë ngarkesat e borës për një kohë të gjatë.
FasadPro D përdoret si një barrierë universale e avullit në të gjitha rastet kur është e nevojshme të mbrohen elementët strukturorë të brendshëm dhe izolimi nga efektet e avullit të ujit nga brenda dhomës. Në çatitë jo të izoluara, materiali përdoret si hidroizolim nën çati, duke mbrojtur elementët strukturorë prej druri nga era, bora dhe lagështia atmosferike që depërton në vendet ku çatia nuk është e vendosur fort. Në mallërat e çimentos, FasadPro D përdoret si një shtresë hidroizoluese kur vendoset dyshemeja në beton, dheu dhe baza të tjera të përshkueshme nga lagështia në dyshemetë e bodrumeve dhe në zona të lagështa. Materiali përdoret si barrierë hidro-avulli në struktura çatitë e sheshta.
Zona e aplikimit:
- jo i izoluar çati e ngritur
- çati e izoluar
- mure të izoluara
- dysheme të izoluara të bodrumit dhe papafingo
- malla çimentoje në bodrume dhe bodrume