Mbulesat qeramike të çatisë konsiderohen më të vjetrat nga të gjitha materialet e çatisë. Pllakat natyrale janë bërë nga balta, e cila përgatitet dhe përzihet posaçërisht materiale të ndryshme. Kjo na lejon të flasim për mirëdashësinë e lartë mjedisore të veshjes dhe qëndrueshmërinë e saj të mirë.
Prodhimi
Pllakat qeramike natyrale janë bërë nga balta e zakonshme e qeramikës (Creaton, Erlus, Tondach). Ky mineral natyral toleron në mënyrë të përkryer efektet e ujit dhe ndryshimeve të temperaturës. Por balta e pastër nuk është fleksibël, kështu që për t'i dhënë elasticitet, pluhurit i shtohen substanca të ndryshme sintetike. Ekzistojnë dy mundësi prodhimi panele qeramike:
- Shirit. Përzierja e përfunduar e argjilës derdhet në një kallëp të madh të sheshtë, i cili përpunohet duke përdorur presion dhe temperaturë të lartë. Më pas, pllaka (ose shiriti) që rezulton lëviz përgjatë tryezës së rrotullimit dhe pritet. Ky prodhim karakterizohet me shpejtësi të madhe, kështu që ky lloj prodhimi i pllakave përdoret më shpesh në fabrika;
- Stampimi. Ky është një sistem paksa i ndryshëm. Përdoren një numër i madh kallëpësh ose stampash në të cilat derdhet përzierja e argjilës. Pas derdhjes përpunohet në furrë. Më pas shtypen pullat. Kjo ju lejon të krijoni pllaka me një cilësi interesante ose valë të pazakontë. Pllaka të tilla janë më të shtrenjta se pllakat me shirita, por ato dallohen për bukurinë dhe qëndrueshmërinë e tyre.
Një lloj tjetër i pllakave natyrale është tjegull çimento-rërë (Sea Wave, Irta, Coppo). Ashtu si balta, ajo ka të shkëlqyera specifikimet dhe është miqësor me mjedisin, por në të njëjtën kohë kushton një renditje të madhësisë më lirë se qeramika. Materiale të tilla për çati janë bërë nga një përzierje e betonit dhe pigmenteve polimer me ngjyrë. Nga jashtë, këto panele praktikisht nuk dallohen nga ato prej balte, por ato janë shumë më të lira. Duhet të theksohet se betoni dhe balta kanë përbërje pothuajse identike. Dallimi i vetëm është se balta duhet të piqet në një furrë në një temperaturë prej 1000 gradë për të marrë fortësi të lartë, dhe betoni - 600.
Llojet e pllakave natyrale:
Avantazhet dhe disavantazhet
Jo çdo shtëpi mund të mbulohet me pllaka natyrale qeramike ose betoni. Fakti është se disavantazhi kryesor i tij është pesha e lartë. Për panelet qeramike mund të arrijë deri në 70 kg për 1 metër katror. Kjo mund të ndikojë në stabilitetin e të gjithë strukturës (veçanërisht nëse themeli është shtyllë ose grumbull). Në të njëjtën kohë, pllakat metalike peshojnë deri në 20-30 kilogramë për metër katror.
Një tjetër pengesë e rëndësishme është se instalimi i veshjes mund të bëhet vetëm panel pas paneli. Për shembull, nëse pllaka të buta Për çati të sheshtë vendoset në shtresa, pastaj qeramika ose betoni ngjitet në një panel në të njëjtën kohë. Ju gjithashtu do të duhet të përdorni mbërthyes të veçantë për instalim. Këto duhet të jenë gozhdë ndërtimi mjaft të gjatë. Për shembull, si për propozoj - 100 ose 200.
Përveç kësaj, instalimi i këtij lloji të çatisë kërkon një dizajn të veçantë mahi. Ato duhet të përforcohen, përndryshe trarët nuk do t'i rezistojnë presionit dhe muret do të fillojnë të deformohen. Kjo është shumë pikë e rëndësishme, e cila duhet të llogaritet në fazën e projektimit të ndërtesës.
Përparësitë e përdorimit të pllakave natyrale:
- Nga të gjitha llojet e çatisë, kjo është e vetmja që lejon çatinë të "marrë frymë". Prandaj, grumbullohet shumë më pak kondensim. Kjo është e dobishme për ndërtesat që ndodhen pranë trupave ujorë;
- Kjo çati është shumë e besueshme. Mund të përballojë jo vetëm reshje të ndryshme, por edhe ndikimet fizike. Një cilësi veçanërisht e njohur është rezistenca e saj ndaj erës - fletë metalike shpesh prishen, ndërsa nuk ka më panele natyrale;
- Qëndrueshmëri deri në 100 vjet. Shtëpitë me veshje qeramike mund të përdoren deri në 100 vjet pa u shqetësuar për çatinë. Sigurisht, mjeshtri rekomandon përditësimin e pllakave qeramike ose çimento çdo 10 vjet, por kjo nuk është një kërkesë kritike;
- Ky lloj pllake nuk plaket. Balta dhe çimentoja nuk i humbasin vetitë e tyre estetike nga ekspozimi ndaj rrezeve të diellit. Kjo është shumë e rëndësishme, sepse shpesh ngjyrë e shurdhër bëhet një nga arsyet e zëvendësimit të çatisë;
- Mund të instalohet pa pajisje speciale. Gjithçka që ju nevojitet është një çekiç, gozhdë, një nivel;
- Qeramika dhe betoni kanë cilësi të shkëlqyera izoluese të zërit. Mur anësor, pllaka metalike dhe materiale të tjera të ngjashme bëjnë shumë zhurmë kur bie shi. Pllakat qeramike ose betoni praktikisht nuk bëjnë asnjë tingull. Kjo është veçanërisht e vërtetë kur dizajnoni një papafingo banimi.
Instalimi
Udhëzime video për instalimin e pllakave natyrale BRAAS
Udhëzime hap pas hapi se si të instaloni një çati të bërë nga pllaka natyrale Braas:
Pasqyrë e çmimeve
Ju mund të blini pllaka natyrale pothuajse në çdo qytet; çmimi i tyre varet nga prodhuesi specifik dhe llojet e këtij materiali për mbulim. Veshja shitet si nga prodhuesi ashtu edhe në dyqanet e kompanisë.
Pllakat qeramike janë një lloj pllakash natyrale që janë bërë nga argjila plastike duke u djegur në një temperaturë prej 1080°C.
Pllaka qeramike
Historia e këtij materiali shkon në antikitet; shfaqja e parë e pllakave në Evropë daton në këtë periudhë.
Më vonë, pllakat prej balte u përhapën dhe u njohën. Sot, një çati me pllaka është një tregues i pasurisë dhe shijes së mirë të pronarit. Për sa i përket karakteristikave të tij, materiali tejkalon ndjeshëm shumë lloje të mbulesave të çatisë.
Përparësitë kryesore të pllakave qeramike:
Jetë e gjatë shërbimi. Veshja nuk kalbet, nuk shkatërrohet nga reshjet dhe rrezet e diellit dhe mund të përballojë ndryshimet e papritura të temperaturës. Ngjyra dhe struktura e materialit ruhen për më shumë se 80 vjet;
E bukur pamjen. Një shtresë elegante dhe spektakolare i jep shtëpisë fisnikëri dhe thekson statusin e pronarit;
Izolimi i zhurmës dhe nxehtësisë. Pllakat qeramike të çatisë e zbehin zhurmën e pikave që bien dhe ju ndihmojnë të jeni të freskët në verë dhe të ngrohtë në dimër;
Siguria mjedisore dhe biologjike. Edhe kur nxehen në diell të ndritshëm, pllakat prej balte nuk lëshojnë komponime toksike. Veshje promovon ventilim natyral, mikroorganizmat dhe kërpudhat nuk shumohen në sipërfaqen e saj;
Besueshmëria. Qeramika - shumë material i qëndrueshëm. Çatitë e pllakave nuk kanë frikë nga reshjet në formën e breshërit. Pllakat shtypen fort kundër mbështjellësit nën peshën e tyre, kështu që çatia mund t'i rezistojë lehtësisht ngarkesave të larta të erës.
Fleksibiliteti i projektimit. Madhësitë relativisht të vogla të pllakave ju lejojnë të krijoni një çati të çdo forme, duke përfshirë dizajne komplekse dhe teknika arkitekturore jo standarde.
Unike pllaka qeramike Fakti është se gjatë shumë shekujve të ekzistencës, përbërja e tij praktikisht nuk ka ndryshuar. Është ende një material krejtësisht natyral. Por metoda e prodhimit manual u zëvendësua nga prodhimi industrial.
Llojet e pllakave qeramike sipas formës:
Lëngu do të grumbullohet në poret në sipërfaqe, gjë që përfundimisht do të shkaktojë shkatërrimin e shtresës së sipërme. Për të forcuar shtresën e jashtme dhe për ta bërë atë të lëmuar, përdoren përbërje që aplikohen në pllaka dhe më pas pjeken. Përdoren dy teknologji bazë - ngjeshja dhe lustrimi. Gjatë mbylljes, pjesa e punës spërkatet ose zhytet tërësisht në një përbërje të bazuar në argjilë me djegie të bardhë, e përzier në përmasat e kërkuara derisa të merret hija e dëshiruar.
Gjithashtu, përbërja e engobës mund të përfshijë pigmente për ngjyrosje në ngjyra të tjera. Balta hollohet me ujë në konsistencën e salcë kosi të lëngshme, pas aplikimit të engobit në sipërfaqe, pllakat dërgohen në furrë. Nën ndikimin e temperaturës, engoba shkrihet dhe depërton në strukturën e pjesës së punës, duke formuar një film të fortë në shtresën e sipërme. Në këtë mënyrë eliminohet poroziteti i tepërt i materialit dhe arrihet butësia. Nëse blini pllaka me këtë shtresë, atëherë përveç diversitetit estetik, merrni një produkt që është më rezistent ndaj lagështirës.
Lustrimi teknologjikisht kryhet në të njëjtën mënyrë si engobimi, me ndryshimin e vetëm që glazura përmban më shumë aglomerate qelqi (për shembull, kuarc), të cilët, kur piqen, formojnë një sipërfaqe me shkëlqim që i ngjan xhamit.
Veshja është më e fortë dhe më monolit; uji nuk depërton nëpër të. Gama e ngjyrave të pllakave qeramike me xham është e larmishme; përveç toneve natyrale, përfshin ngjyra të ndezura të panatyrshme.
Si të zgjidhni pllaka qeramike me cilësi të lartë?
Me gjithë listën e avantazheve të pllakave qeramike natyrale, ka shumë shembuj se si kjo në dukje e përjetshme mbulesë çatie bie në gjendje të keqe në vetëm disa sezone. Ka disa arsye për këtë.
Pllakat natyrale janë një nga materialet më të njohura të çatisë në Evropë. Historia e saj shkon mijëra vjet më parë; përdorimi i pllakave natyrore është një nga metodat më të vjetra të mbulimit të çatisë. Prodhimi i pllakave tradicionalisht bëhet në ato vende ku ka depozita të mëdha argjile të cilësisë së përshtatshme.
Prodhimi i pllakave natyrale kalon nëpër faza të ndryshme të përpunimit: përgatitja e lëndëve të para, formimi i copave dhe pjekja. Së pari, masa e argjilës i nënshtrohet përpunimit, duke arritur një masë homogjene plastike, pas së cilës formimi i pllakave ndodh duke përdorur një teknologji të veçantë.
Tjetra faza e detyrueshme përpunimi i pllakave natyrore është tharje. Ky proces kryhet për disa orë në dhoma të specializuara, pas së cilës produkti është gati për pjekje. Pjekja kryhet në furra në një temperaturë prej 1000 gradë.
Është mjaft e vështirë për të marrë pllaka natyrale me të vërtetë të cilësisë së lartë; procesi i prodhimit është teknologjikisht kompleks dhe kërkon monitorim për të siguruar që materiali të mbajë një densitet të lartë (që siguron rezistencë ndaj ujit dhe rezistencë ndaj ngricave), për këtë është e nevojshme që materiali të përmbajë sa më pak papastërti.
Pllaka natyrale - me cilësi të lartë material për mbulim, e cila ka përparësitë e mëposhtme:
- Komponent dekorativ. Pllakat natyrale kanë një pamje tërheqëse.
- Besueshmëria, qëndrueshmëria, cilësia.
- Rezistenca ndaj zjarrit.
- Pllakat natyrale janë një material miqësor me mjedisin.
- Rezistenca ndaj ndikimeve natyrore (shiu, ultravjollcë, ngarkesat e erës).
- Materiali ka përçueshmëri të ulët termike dhe aftësi për të thithur zhurmën.
Llojet e pllakave natyrale:
Pllaka qeramike.
Materiali nga i cili janë bërë pllakat qeramike është balta vajore dhe plastike. Procesi i bërjes së pllakave qeramike kalon nëpër faza: së pari, formohet balta, pastaj masa duhet të thahet dhe të aplikohet një shtresë mbrojtëse. Faza e fundit e prodhimit të pllakave qeramike është pjekja e materialit në një furrë në një temperaturë prej 1000 gradë. Si rezultat i prodhimit, formohet një i qëndrueshëm, me cilësi të lartë, i besueshëm, miqësor me mjedisin, thithës i zhurmës, që nuk i nënshtrohet ndikimeve të jashtme mekanike dhe kushteve të pafavorshme. mjedisi mbulesë çatie që do t'u shërbejë pronarëve të saj për të paktën 100 vjet.
Pllaka çimento-rërë.
Ky është një material natyral i bërë nga një përzierje e rërës së larë me cilësi të lartë, çimentos pa asnjë aditiv, pigmenteve të oksidit të hekurit, ujit dhe ngjyrave të ndryshme. Kjo lloj pllake natyrale, ashtu si pllakat qeramike, ka shumë lloje, të ndryshme në ngjyra dhe cilësi, gjë që e bën çatinë estetikisht tërheqëse dhe origjinale. Mbulim nga pllaka çimento-rërë praktikisht nuk plaket, i reziston ngarkesave të konsiderueshme dhe nuk i nënshtrohet ndikimeve të pafavorshme mjedisore (lagështia, rrezet UV, shpërthimet e mëdha të erës).
Kur vendosni të vendosni një çati prej pllakash natyrale, qofshin materiale qeramike apo çimento-rërë, mund të gjeni një çati që do të zgjasë për shumë vite, ndërsa pamja e saj nuk do të humbasë cilësitë e saj me kalimin e kohës dhe funksionaliteti i saj do të mbetet njëjtë. Falë numrit të madh të modeleve të paraqitura në tregun e ndërtimit, është e mundur të zgjidhni saktësisht opsionin e çatisë që është i përshtatshëm për ju dhe projektin tuaj individual të ndërtimit të shtëpisë.
Prodhuesit më të njohur të pllakave natyrore:
Pllaka çimento-rërë:
- BRAAS – linja moderne prodhimi gjermane. Jetë shërbimi mbi 50 vjet, 30 vjet garanci.
- Baltictile është një produkt i prodhimit të përbashkët të kompanisë Baltic Tile dhe Holding suedez Benders, i lançuar në prodhim disa vite më parë, por është jashtëzakonisht i popullarizuar në mesin e blerësve rusë. Jetë shërbimi më shumë se 50 vjet, garanci 35 vjet.
- ABC është kompania ABCKlinkergrouppe, një prodhues lider gjerman i produkteve të klinkerit. Jetë shërbimi më shumë se 50 vjet, garanci 35 vjet.
- Cottosenese - Prodhuesi italian, i famshëm për katalogun e tij të skemave të ngjyrave të produkteve që imitojnë një sipërfaqe të vjetëruar. Jetë shërbimi më shumë se 50 vjet, garanci 35 vjet.
- Nelskamp – Prodhuar në Gjermani, një katalog i pasur materialesh me ngjyra dhe tekstura të ndryshme, duke kombinuar karakterin modern të arkitekturës. Jetë shërbimi më shumë se 50 vjet, garanci 35 vjet.
- Koramic - Prodhues gjerman, Më shumë se 20 ngjyra në paleta, 11 profile të ndryshme. Jetë shërbimi më shumë se 50 vjet, garanci 35 vjet.
Për të siguruar që materiali që zgjidhni të mos humbasë cilësitë dhe bukurinë e tij, duhet t'ia besoni instalimin e pllakave çatisëve profesionistë ose specialistëve në këtë çështje. Intensiteti i punës dhe kompleksiteti i punës përcaktohet nga shumë nuanca, respektimi i të cilave nuk do t'ju lejojë të hidhni fondet tuaja të investuara.
Pllakat natyrale janë rreth 5-6 herë më të rënda se pllakat e bitumit, dhe pllakat metalike janë 10 herë më të lehta se pllakat qeramike. Nga kjo rrjedh se kur instaloni një çati të bërë nga pllaka natyrale, hapi i parë është forcimi i mahijeve. Duhet të theksohet se kur vendosni çati në çati me një pjerrësi prej 10 deri në 90 gradë, përdoren pllaka natyrale.
Gjatë llogaritjes sistem mahiështë gjithashtu e nevojshme të merret parasysh ngarkesa shtesë në çati, për shembull bora, e cila në kushtet ruse varion nga 50 në 200 kg për m2. Gjithashtu merret parasysh pjerrësia e çatisë, nëse është më shumë se 50 gradë, atëherë pllakat natyrore duhet të sigurohen me vida shtesë. Nëse pjerrësia është nga 10 në 22 gradë, atëherë është më e këshillueshme që të sigurohet një shtresë shtesë hidroizolimi në pllaka.
Gjatë instalimit të mbështjellësit, hapi i parë është llogaritja e topit mbështjellës duke filluar nga këndi i sipërm i majtë. Nevojitet një varg për të shënuar rreshtat. Në të njëjtën kohë, matet diferenca në lartësinë e secilës shtyllë kundër. Nëse ekzistojnë dallime, atëherë në vendin e pabarazisë duhet të përdorni rrasa speciale për të niveluar sipërfaqen.
Kur vendosni pllaka, së pari duhet të llogaritet materiali, 5-6 copë në secilën shpat, kjo është e nevojshme për një ngarkesë të barabartë në mahi. Pllakat vendosen nga e djathta në të majtë nga lart poshtë. Rreshtat e parë dhe anësore të pllakave janë të siguruara me vida të galvanizuara. Nëse është e nevojshme, pllakat fiksohen në shpat në një model shahu.
Pllakat qeramike dhe çimento-rërë praktikisht nuk vjetërohen, janë rezistente ndaj kushteve natyrore, përballojnë ngarkesa të rënda dhe falë masës së madhe dhe madhësisë së vogël të pllakave, çatia mund t'i rezistojë edhe erërave të forta uragane. Pllakat kanë përçueshmëri të ulët termike, ngrohen ngadalë dhe ftohen ngadalë, kështu që ajri i ngrohtë qarkullon vazhdimisht në shtëpi, parandalon depërtimin e lagështirës, duke ruajtur strukturën e mahijeve. Mbulesa me pllaka nuk deformon dhe mund t'i rezistojë depozitave të mëdha të borës dhe "marrë frymë", duke siguruar një mikroklimë të këndshme në shtëpi.
Pllakat janë një pjesë e materialit për çati që ka një histori, teknologji dhe tradita shekullore.
Fjala "tjegull" është përkthyer në gjuhe angleze si "Pllakë". Kjo fjalë mund të gjendet në emrat e shumë kompanive dhe firmave të çatisë.
Përdorimi i tjegullave si material për mbulim ka një histori të gjatë dhe shkon në kohët e lashta (rreth shek. VII p.e.s. - shekulli IV pas Krishtit).Që nga lashtësia, pllakat qeramike janë përdorur si material për mbulim në Evropë, Kinë, Indi etj. .
Aktualisht, pllakat natyrore klasifikohen si materiale elitare për çati, duke i dhënë strukturës një status, pamje dhe qëndrueshmëri të veçantë. Përparësitë e pllakave sigurisht përfshijnë qëndrueshmërinë e tyre, e cila ilustrohet në mënyrë të përsosur nga çatitë me pllaka të kështjellave dhe shtëpive të ndërtuara në shekujt e kaluar.
Me zhvillimin e shkencës dhe teknologjive moderne, cilësia e pllakave natyrale është përmirësuar dhe gama e formave dhe ngjyrave është zgjeruar ndjeshëm. Sot mund të zgjidhni pllaka të pothuajse çdo nuance: nga e verdha në të zezë, me një sipërfaqe me shkëlqim ose mat.
Llojet e pllakave natyrale
Ekzistojnë dy lloje të pllakave natyrale: qeramike Dhe çimento-rërë.
Pllaka qeramikeështë një material mbulimi që është përdorur me shekuj, dhe pllakat me rërë çimento janë analogu i tij "më i ri", i cili u shfaq pas shpikjes së çimentos në 1825. Të dy këto materiale kanë të njëjtin qëllim aplikimi, kërkesat për ndërtimin e çatisë, parametrat teknikë, gamën e komponentëve dhe aksesorëve, janë shumë të ngjashëm në pamje dhe përbëhen nga përbërës minerale natyralë.
Sidoqoftë, përbërja e tyre, si dhe metodat e prodhimit, ndryshojnë ndjeshëm. Pllakat qeramike janë bërë në bazë balte, dhe pllaka çimento-rërë janë bërë në një bazë çimentoje.
Pllaka qeramike (balte)
Pllakat qeramike quhen me meritë "mbretëresha e pllakave".
Emri i aplikueshëm - Qeramika.
Është bërë nga lloje të veçanta balte. Sipas recetës, atij i shtohen plastifikues të veçantë. Copëzat formohen duke përdorur metodën e shiritit ose vulosjes:
- me metodën e prodhimit me shirita, shiritat e argjilës së ngjeshur të ngurtë priten në elementë të veçantë përpara se të pjeken
- pllakat e stampuara shtypen në kallëpe të veçanta metalike.
Më pas, copat e grimcuara piqen në një temperaturë prej rreth 1000°C.
Cilësia e argjilës dhe ngrohjes sigurojnë porozitet të ulët dhe forcë të lartë të materialit. Ngjyra natyrale e pllakave prej balte është "terrakote", nuancat varen nga karakteristikat e bazës së lëndës së parë (e verdhë tregon praninë e kalciumit në argjilë, kafe - mangan, nuancat e kuqe - hekur) dhe kushtet e pjekjes (pllakat e errëta shkrihen dy herë). Një shumëllojshmëri ngjyrash dhe shkëlqimi sigurohet duke aplikuar engobe (argjilë me ngjyrë) dhe lustër (veshje qelqore) në sipërfaqen e pllakave.
Çatitë e shumë qyteteve të Evropës Perëndimore janë të mbuluara me pllaka qeramike. Sipas vlerësimeve të ndryshme, pjesa e qeramikës në Europa Perëndimore përbën 70-75%
Pllaka çimento-rërë - TsPCh
Pllakat e çimentos-rërës janë bërë nga një përzierje gjysmë e thatë e rërës, çimentos dhe ujit. Përzierjes i shtohen edhe gëlqere dhe gips. Ngjyra natyrale e masës është gri (si betoni), kështu që përbërjes i shtohen pigmente minerale për ta ngjyrosur atë. Copëzat formohen duke përdorur metodën e shiritit, pas së cilës ato janë të veshura me një bojë me bazë akrilike, e cila mbyll sipërfaqen e përparme të produkteve dhe i bën ato të lëmuara. Më pas pllakat thahen në temperaturën 60°C dhe mbahen në një magazinë për disa kohë.
Prodhimi i CPC është më i thjeshtë dhe konsumon më pak energji sesa qeramika, kështu që çmimi i tij është një rend i madhësisë më i lirë. Në të njëjtën kohë, CPC është superiore ndaj qeramikës në forcë dhe rezistencë ndaj ngricave dhe nuk karakterizohet nga brishtësia si qeramika, gjë që shpesh e ndërlikon transportin e materialit.
Dallimet midis pllakave qeramike dhe çimento-rërë
- Struktura e sipërfaqes: qeramika - absolutisht e lëmuar, CPC - pak e ashpër
- Trashësia pllaka qeramike- 10-15 mm, për çimento-rërë - rreth 30 mm
- Forma - Skaji i pllakave me rërë çimentoje zakonisht copëtohet, ndërsa pllakat qeramike kanë forma më të lëmuara, brazda dhe bravë më të thellë, një profil më të këndshëm.
- Shumëllojshmëria e modeleve të qeramikës është më e madhe për shkak të shumëllojshmërisë së metodave teknologjike për prodhimin e saj
- Gama e ngjyrave të pllakave qeramike është shumë më e gjerë se ajo e pllakave çimento-rërë.
Në çati, dallimet midis materialeve janë mezi të dukshme dhe nuk ndikojnë në vetitë cilësore të vetë çatisë.
Dallimet cilësore midis pllakave natyrore dhe materialeve të tjera të çatisë
Përparësitë e pllakave natyrore përfshijnë: funksionimin afatgjatë, rezistencën ndaj ndikimeve të jashtme si lagështia, ngrica e fortë, era e fortë, rrezatimi ultravjollcë dhe kimikatet. Ndër cilësitë unike: mirëdashësia mjedisore dhe, natyrisht, ripërdorimi, pasi elementët mbulues mund të hiqen lehtësisht nga një çati dhe të vendosen në një tjetër. Dhe nëse pllakat individuale dëmtohen gjatë shërbimit, zëvendësimi i tyre nuk do të jetë i vështirë.
Një çati me pllaka mbron mirë shtëpinë nga zhurma dhe mbinxehja dhe ndihmon në ruajtjen e strukturës së çatisë (çatia është e ajrosur mirë dhe kondensimi nuk krijohet në pjesën e poshtme). Është gjithashtu e rëndësishme që kur përdorni pllaka të mos ketë mbeturina; saktësia e lartë e dimensioneve të elementeve siguron përputhje të plotë me llogaritjet e projektimit.
POR! Tipe te ndryshme herpes mund të ndryshojnë shumë në cilësi. Kështu, rritja e porozitetit dhe prania e zgavrave në trashësi çojnë në plasaritje të pllakave gjatë ngrirjes. Disavantazhe të tjera karakteristike si për qeramikën ashtu edhe për CPC përfshijnë një shkelje të gjeometrisë së copave, gjë që shkakton formimin e çarjeve në veshje përmes të cilave uji mund të depërtojë. Epo, disavantazhi më i zakonshëm me të cilin përpiqen të luajnë konkurrentët e pllakave natyrore është pesha e madhe e këtij materiali.
Pllakat natyrale janë një nga më Llojet e vjetra të materialeve për çati. Gjithashtu në Greqia e lashte banorët e saj i mbuluan shtëpitë me pllaka natyrale prej mermeri dhe qeramike. Kjo traditë u vazhdua nga romakët e lashtë.
Ky material për mbulim u shfaq në tokën tonë shumë më vonë, përkatësisht në fund të shekullit të 19-të, kur vëllezërit Gustav dhe Matthias Schiffer erdhën në Shën Petersburg për të ndërtuar një karusel në Tsarskoe Selo. Ata ishin të parët që hapën prodhimin e kësaj pllake në Rusi. Prandaj, pa vonesë, mund të themi se pllakat natyrore janë çati e testuar me kohë.
Emra të tjerë për pllaka natyrale - pllaka qeramike ose balte. Përftohet nga pjekja e argjilës speciale me shkrirje të ulët (me aditivë të ndryshëm) në temperaturë 1000°C. Ngjyra e produktit të përfunduar natyral është më së shpeshti e kuqe-kafe. Por ka edhe ngjyra të tjera: kafe, vishnje, e zezë, jeshile, blu, e verdhë dhe gri. Ndonjëherë, për të rritur vetitë e papërshkueshme nga uji, para se të dërgoni pjesët e punës në furrë, ato lyhen me një lustër të veçantë. Madhësia dhe pesha e pllakave të përfunduara janë zakonisht 30x30 cm dhe 2 kg, përkatësisht.
Llojet e pllakave natyrale
Forma e petalit:
- E sheshtë (bisht kastor)- pllaka qeramike që kanë formë të sheshtë. Instalimi i tij kryhet duke përdorur gozhdë ose kapëse. Disavantazhi kryesor i këtij lloji të pllakave qeramike është masiviteti i tij. Meqenëse, për shkak të veçorive të instalimit (një pllakë ka 2 vrima, secila prej të cilave shërben element lidhës për të dhe tjegull mbivendosëse, d.m.th. Pllakat vendosen në një mbivendosje prej 1/2 e gjerësisë së saj) dhe çatia është bërë nga dy shtresa.
- Groove (kasetë dhe stampuar)- Këto janë pllaka me formë komplekse të profilizuar. Kryesorja e saj tipar dallues dalin brazdat dhe brinjët, me ndihmën e të cilave pllakat lidhen me njëra-tjetrën. Ndryshe nga ajo e mëparshme, kjo çati është me një shtresë. Ky është lloji më i papërshkueshëm nga uji i pllakave.
- Me onde (me onde)- lloji më i zakonshëm i pllakave natyrale. Mund të jetë ose një shtresë ( S-formë), dhe me dy shtresa. Pllakat shpesh lidhen me njëra-tjetrën duke përdorur kanale, të cilat sigurojnë saktësinë e instalimit.
- Me brazda ("murg-murgeshë" ose murgeshë) - ky lloj Pllakat përbëhen nga 2 shtresa: shtresa e sipërme- pllaka konvekse (munch ose "monk"), ajo e poshtme - pllaka konkave (nunn ose "nun"). Kjo çati ka karakteristika të mira të përshkueshmërisë së ujit. Përveç kësaj, falë instalimit të duhur këtë shtresë nuk kërkon ventilim shtesë. Disavantazhi kryesor këtu është kostoja e lartë, pasi veshja kërkon 2 herë më shumë material për njësi sipërfaqe.
Sipas madhësisë së pllakës:
- Format i vogël- më shumë se 20 copë për 1 m². sipërfaqja e çatisë.
- Formati mesatar- nga 10 deri në 20 copë për 1 m². sipërfaqja e çatisë.
- Format i madh- më pak se 10 copë për 1 m². sipërfaqja e çatisë.
Nga veshje mbrojtëse:
- - këto janë pllaka pa veshje shtesë, të cilat kanë ngjyrën e tyre natyrale (kuqe-kafe). E veçanta e kësaj shtrese është se kjo shtresë errësohet me kalimin e kohës dhe mbulohet me një patina.
- Me xham- pllaka të marra nga aplikimi i një lënde qelqi në pjesët e punës, e cila gjatë procesit të pjekjes formon një sipërfaqe me shkëlqim. Lustër këtu luan jo vetëm rolin e veçori dekorative, por edhe si një shtresë shtesë mbrojtëse që pengon depërtimin e lagështirës në poret e produktit qeramik.
- Engobed- në prodhimin e këtij lloji të pllakave qeramike përdoret argjila pluhur, e cila pasi përzihet me ujë dhe aditiv mineral, lyen pjesët e punës. Rezultati është produkte me ngjyra të caktuara me një përfundim mat ose me shkëlqim.
Karakteristikat kryesore të pllakave qeramike
Indeksi | Kuptimi | shënim |
Çmimi |
nga 450 rub./m². |
për vitin 2014 |
Jetëgjatësia e shërbimit deri në riparimin e parë |
||
Jeta e shërbimit para zëvendësimit |
më shumë se 100 vjet |
varet nga kushtet e funksionimit |
Vështirësia e riparimit |
në varësi të llojit të pllakës natyrore, do të jetë e nevojshme të çmontoni ose vetëm elementin e dëmtuar, ose elementin e dëmtuar me ato ngjitur |
|
Ndryshimet nën ngarkesën e pikës |
asnje |
Pllakat qeramike mund të përballojnë deri në 250 kg ngarkesë pikë |
Karakteristikat e izolimit të zërit |
i shkëlqyer |
për shkak të masës dhe strukturës vëllimore, kjo lloj pllake është një izolues i shkëlqyer i zërit |
Siguria nga zjarri (ndezshmëria) |
material jo i ndezshëm |
|
Këndi minimal i aplikimit |
||
Pesha 1 m2. |
material shumë i rëndë |
|
Kërkesat për sipërfaqen e çatisë |
dysheme të forta |
|
gozhdë, vida, nyje mbyllëse |
Mënyra e fiksimit varet nga lloji i pllakave qeramike |
|
Pika e zbutjes |
më shumë se 1000°С |
Në kushte natyrore, zbutja e çatisë nuk ndodh |
Ndikimi i temperaturave negative |
mungon |
ky lloj çatie "nuk ka frikë" nga ndonjë temperaturë negative natyrore |
Ndikimi i breshrit |
në shumicën e rasteve mungon |
breshri në pllaka qeramike praktikisht nuk lë dëme, d.m.th. Në rast breshëri të madhe, janë të mundshme patate të skuqura të vogla |
përgjatë shpatit (vertikal) - 0,5 gjerësi pllake në të gjithë shpatin (horizontal) - 0,5 gjatësi të pllakave |
Në mënyrë tipike, mbivendosja e herpesve mbi njëri-tjetrin në drejtimet vertikale dhe horizontale është A/2 dhe B/2, ku A është gjatësia e herpes, B është gjerësia e saj. |
Të mirat dhe të këqijat e pllakave natyrore
Pro (+):
- mirëdashësi mjedisore - kjo është çatia më miqësore me mjedisin, pasi përbërësi kryesor i saj është balta;
- qëndrueshmëri - ky lloj mbulimi mund të shërbejë për më shumë se një gjeneratë;
- Siguri nga zjarri - pllakat natyrale nuk digjen dhe nuk mbështesin djegien;
- rezistenca ndaj mjediseve agresive dhe rrezatimit diellor - Pllakat qeramike nuk zbehen në diell dhe nuk ndryshojnë pamjen e tyre kur ekspozohen ndaj shiut acid;
- thithjen e zërit - ky lloj çati mbyt në mënyrë të përkryer zhurmën e jashtme;
- lehtësinë e përdorimit - në shumicën e rasteve, pllakat qeramike nuk kërkojnë asnjë mirëmbajtje, d.m.th. në lidhje me të, fjalët "mbulo dhe harro" janë mjaft të përshtatshme;
- ka veti antistatike - Pllakat prej balte nuk grumbullojnë rrymë elektrike.
Kundër (+):
- kosto e larte - ky është një nga përfaqësuesit më të shtrenjtë të materialeve për çati;
- peshë të rëndë - Pllakat qeramike kërkojnë struktura të përforcuara dërrase;
- kërkon trajtim të kujdesshëm - për të ruajtur pamjen e saj, kjo pllakë kërkon kujdes gjatë transportit dhe instalimit;
- intensiteti i punës - instalimi i një çati të bërë nga pllaka qeramike është një detyrë shumë e mundimshme dhe kërkon shumë kohë (do të duhen të paktën 12 javë për të mbuluar një çati me madhësi mesatare);