Korrigjimi i dhomës është përdorur prej kohësh nga inxhinierët e zërit për të siguruar akordim të tingullit në studio dhe sallat e koncerteve, me synimin për të reduktuar ndikimin e karakteristikave të dhomës në tingull. Kjo është veçanërisht e rëndësishme për studiot e regjistrimit, të cilat nuk kanë nevojë të shtojnë asgjë shtesë në tingullin e regjistruar. Në studio, përpunimi akustik përdoret kryesisht, por në salla, kjo bëhet duke përdorur barazues grafikë me shumë breza ose barazues parametrikë dixhitalë. Problemet në riprodhimin e zërit identifikohen me vesh ose me ndihmën e mikrofonit matës. pjesë të ndryshme dhomë, pas së cilës korrigjimi kryhet duke përdorur barazuesit ekzistues.
Idealisht, ne duhet të kemi një mjedis të ngjashëm tingulli në shtëpi kur dëgjojmë regjistrime të ndryshme, të cilat mund të japin tingullin ashtu siç kishte menduar inxhinieri i zërit. Realitetet e jetës sonë janë të tilla që pakkush mund të përballojë përfundimin e plotë akustik të dhomave në një apartament ose shtëpi, dhe për këtë arsye disa ftojnë instaluesit e pajisjeve të zërit, ndërsa të tjerë përpiqen të rregullojnë gjithçka vetë. Fatkeqësisht, ky operacion kërkon njohuri të caktuara teorike, përvojë, si dhe pajisje të përshtatshme. Prandaj, për nevojat e shtëpisë, kanë filluar të përdoren gjithnjë e më shumë sistemet e kalibrimit automatik, të cilat përsërisin veprimet e një inxhinieri ose instaluesi të zërit, por e bëjnë vetëm automatikisht, duke përdorur një mikrofon të jashtëm.
Në shumicën e artikujve që përshkruajnë pajisje të ndryshme shtëpiake, aftësitë e sistemeve të kalibrimit praktikisht nuk merren parasysh. Dhe çështja e krahasimit sisteme të ndryshme kalibrimi, me sa di autori, nuk është marrë fare në konsideratë nga askush. Ndjehet sikur është diçka si një tabu mes recensentëve. Epo, le ta ndryshojmë pak këtë botë. Në këtë artikull ne do të përpiqemi të korrigjojmë këtë lëshim dhe të krahasojmë sistemet më të zakonshme të rregullimit. Në të njëjtën kohë, ne nuk do të krahasojmë ndryshimet në tingullin e marrësve të përdorur dhe kapacitetin e tyre të ngarkesës, nuk do të masim shtrembërimin, as nuk do të eksplorojmë funksione shtesë, edhe nëse ka të bëjë me tingullin - kjo është një temë krejtësisht e veçantë.
Ne gjithashtu do të prekim lehtë temën e barazimit manual, i cili mund të jetë i dobishëm për pronarët e marrësve me pakënaqësi sistem automatik dhe për pronarët e amplifikatorëve.
Pak teori
Me zhvillimin e teknologjive dixhitale në pajisjet audio të rangut të mesëm dhe madje edhe të buxhetit, ne kemi mundësinë të kryejmë korrigjimin paraprak të tingullit të riprodhuar në pikën e zgjedhur të dëgjimit përmes sistemet e altoparlantëve(AS) duke marrë parasysh karakteristikat e një dhome të caktuar, madhësinë e saj, rregullimin e altoparlantëve dhe objekteve përreth (mobilje, perde, qilima, etj.).
Detyra e sistemeve të tilla është, së paku, të korrigjojnë përgjigjen e frekuencës amplitudë (AFC) në pikën e dëgjimit veçmas për secilin altoparlant, si dhe atë totale kur disa altoparlantë tingëllojnë njëkohësisht në një sistem me shumë kanale. teatër në shtëpi. Përveç përgjigjes së frekuencës, për të koordinuar funksionimin e njëkohshëm të disa altoparlantëve, është gjithashtu e nevojshme të sinkronizoni përgjigjen e frekuencës së fazës (PFC), dhe për të përmirësuar perceptimin e muzikës, është gjithashtu e nevojshme të sigurohet një vonesë minimale në grup ( GDT).
Detyra bëhet më e ndërlikuar nëse përdoren altoparlantët prodhues të ndryshëm ose linjat e modelit, vetë altoparlantët kanë përgjigje të pabarabartë të frekuencës dhe dhoma nuk ka trajtim minimal akustik për të zvogëluar ndikimin e reflektimeve. Ai shton vështirësi nëse altoparlantët dhe pika e dëgjimit zgjidhen gabimisht: disa frekuenca përforcohen në pikën e dëgjimit, gjë që shkakton mërmëritje ose ngjyrosje të pakëndshme të timbrit, dhe disa frekuenca zbriten reciprokisht, duke formuar një rënie në përgjigjen e frekuencës, gjë që çon në shterimi i timbreve muzikore dhe, përsëri, tingulli shtesë i ngjyrosjes.
Parimi i funksionimit të sistemeve të tilla korrigjuese është të bëhen ndryshime në sinjalin origjinal në fazën e përpunimit nga një procesor dixhital i zërit (DSP) në mënyrë të tillë që të merren parametrat më të barabartë të riprodhimit në pikën e dëgjimit, pa ndikim. të dhomës dhe karakteristikat e altoparlantëve specifikë në kinemanë shtëpiake.
Asnjëherë nuk duhet të harroni se vetëm me ndihmën e korrigjimit paraprak të zërit është e pamundur të zgjidhen të gjitha problemet e riprodhimit të zërit përmes altoparlantëve në dhomën e ndenjes dhe këshillohet që fillimisht të kryhen një sërë masash për vendosjen e saktë të altoparlantëve. , përzgjedhja e një pike dëgjimi, përpunimi minimal i dhomës për të eliminuar reflektimet e padëshiruara të sinjaleve nga muret, dyshemeja dhe tavani. Dhe vetëm pas kësaj, kur të jetë bërë gjithçka e mundur për dhomën aktuale, mund të filloni të korrigjoni sinjalin si faza përfundimtare e rregullimit të zërit të sistemit audio në dhomën që po përdorni.
Korrigjim automatik
Marrësit modernë kanë të instaluar procesorë mjaft të fuqishëm brenda tyre, të cilët, duke matur përgjigjen e secilit altoparlant në pikën e dëgjimit, mund të modaliteti automatik konfiguroni korrigjimin e zërit si në amplitudë ashtu edhe në fazë, gjë që duhet të çojë në devijime minimale në grafikun e përgjigjes së frekuencës dhe funksionimin në fazë të altoparlantëve të ndryshëm.
Materialet promovuese për të gjitha sistemet e përshkruajnë atë këtë sistem duke përdorur një mikrofon të jashtëm, ai analizon të gjithë parametrat e riprodhimit të zërit në një dhomë të caktuar dhe bën të gjitha korrigjimet e nevojshme për të siguruar tingullin më të mirë. Domethënë, në shikim të parë, të gjitha sistemet janë mjaft ekuivalente, dhe kur zgjedhim një marrës audio/video, nuk duhet t'i kushtojmë më vëmendje se cili sistem kalibrimi është i instaluar, por duhet t'i kushtojmë më shumë vëmendje numrit të kanaleve, amplifikatorit. fuqia, aftësitë për lidhjen e pajisjeve celulare, etj. I vetmi ndryshim i dukshëm midis sistemeve të niveleve të ndryshme është prania ose mungesa e korrigjimit të kanalit të nënvuferit (si rregull, në marrës të lirë kanali i nënvuferit nuk mund të korrigjohet për përgjigjen e frekuencës).
Në praktikë rezulton se sisteme të ndryshme kanë efekte krejtësisht të ndryshme në optimizimin e zërit, dhe rezultati përfundimtar ndryshon shumë kur përdorni një ose një sistem tjetër. Edhe nga një prodhues, ekzistojnë disa klasa të sistemeve të tilla që kanë aftësi të ndryshme për redaktimin e zërit.
Ndërkohë, të gjitha sistemet e tilla ofrojnë një nivel minimal komod: ata përcaktojnë numrin e altoparlantëve të lidhur, distancën me to dhe nivelin e amplifikimit për secilin altoparlant. Parametrat mund të vendosen manualisht, por me ndihmën e mikrofonit gjithçka bëhet më saktë dhe më shpejt.
Detyrë testuese
Qëllimi i rishikimit është një test praktik i sistemeve të ndryshme të kalibrimit automatik të zërit për karakteristikat e dhomës në të njëjtat kushte: në të njëjtat altoparlantë, në të njëjtën dhomë ndenje me altoparlantë nga prodhues të ndryshëm në vendet e përparme, qendrore dhe të pasme. Sigurisht, është më mirë të keni altoparlantë nga e njëjta kompani dhe e njëjta seri, por shpesh, për arsye të ndryshme, lindin situata kur sistemi montohet gjatë një periudhe kohore dhe rezulton disa mospërputhje.
Testimi u krye si me opsionin e konfigurimit "out of the box" dhe me ndryshime manuale parametra të ndryshëm për të arritur përgjigjen optimale të frekuencës.
Çfarë duhet të sigurojë një sistem ideal kalibrimi? Përgjigje e njëtrajtshme e frekuencës në pikën e dëgjimit kur luhet zëri ose përmes një altoparlanti të vetëm ose përmes çdo numri altoparlantësh që funksionojnë njëkohësisht. Për tingullin rrethues, është e rëndësishme që gjatë lëvizjes së një imazhi muzikor në hapësirën e krijuar të zërit, tonaliteti i tij të mos ndryshojë, gjë që mund të arrihet vetëm nga një përputhje e mirë e përgjigjes së frekuencës dhe përgjigjes së fazës në pikën e dëgjimit.
Çfarë mund t'ju pengojë të merrni një përgjigje të qetë të frekuencës në pikën e dëgjimit?
- Formimi i valëve në këmbë për shkak të reflektimeve të shumta të valëve të zërit nga muret. Në pikën e dëgjimit, mund të ndodhë si një rritje në amplitudë origjinale (antinyja e valës në këmbë) dhe një dobësim i amplitudës (nyja e valës në këmbë).
- Efekti SBIR është ndërveprimi midis zërit të drejtpërdrejtë nga altoparlantët dhe reflektimeve nga kufijtë e afërt të dhomës.
- Dobësimi i amplitudës së sinjalit për shkak të dobësimit të valëve nga altoparlantë të ndryshëm, fazat e të cilave ndryshojnë në pikën e dëgjimit.
- Kurba fillestare e përgjigjes së frekuencës së vetë altoparlantëve.
Dhoma e provës dhe pajisjet matëse
Një shembull i një dhome testimi për të dëgjuar muzikë. Jo dhoma aktuale e provës e përshkruar në këtë artikull!
Dhoma e testimit është një dhomë ndenjeje me përmasa 5,8 x 3,1 x 2,7 m (J x P x H) me një dera e përparme dhe një derë në ballkon. Altoparlanti i përparmë ndodhet në një mur të shkurtër në një distancë prej 70 cm nga dritarja. Pozicioni i dëgjimit ndodhet në një divan lëkure 2 metra nga sistemi i përparmë dhe 3 metra nga muri i pasmë. Ka një tapet me grumbull të mesëm në dysheme midis divanit dhe altoparlantit të përparmë dhe një perde të trashë në dritare. Nënvuferi ndodhet midis altoparlantit të majtë dhe raftit qendror të pajisjeve.
Sistemet e mëposhtme akustike janë instaluar në dhomë:
Të gjithë altoparlantët me rreze të plotë janë të dyanshme me një refleks basi, nënvuferi është i pajisur me një altoparlant 15 inç duke përdorur elektromagnetik reagime në një strehim të tipit "kuti të mbyllur".
Pajisjet e mëposhtme përdoren për matje:
- Mikrofoni matës Behringer ECM 8000
- Ndërfaqja Shure X2U XLR-në-USB me fuqi fantazmë për mikrofonin
- Matësi i nivelit të zërit CEM DT-815
- Laptop ASUS N46vz me kartë zëri të integruar (Realtek HD Audio)
- Ndërfaqja audio USB Behringer U-Control UCA202 (çip PCM2902E)
- Softueri REW v5.1 beta 17
- Një grup telash të nevojshëm, një mbajtës vinçi, një trekëmbësh fotografish
Duhet theksuar se pajisjet matëse dhe programet kompjuterike nuk janë profesionale, ndaj rekomandohet krahasimi i grafikëve të marra gjatë testimit jo me të tjerët, por vetëm me njëri-tjetrin në kuadër të këtij testi. Megjithatë, me sa di autori, ky mikrofon dhe programi REW janë të përhapur në mesin e amatorëve. zë i mirë, dhe për këtë arsye, sipas kufizimeve të caktuara, rezultatet janë të pranueshme për krahasim.
Metodologjia e testimit
Për të marrë matjet e zërit të altoparlantëve të ndryshëm në pikën e dëgjimit, përdoret një mikrofon matës Behringer ECM 8000, i cili lidhet nëpërmjet një përshtatësi Shure X2U në portën USB të një laptopi ASUS N46vz. Laptopi përdor softuerin REW v5.1. Dalja nga karta e integruar e zërit lidhet me një nga hyrjet analoge të marrësit në provë.
Duke përdorur softuerin REW, gjenerohet një ton fshirjeje provë, e cila riprodhohet nga altoparlanti i zgjedhur përmes marrësit. Valët zanore kapen nga një mikrofon matës, të dhënat nga i cili përpunohen në softuerin REW, duke rezultuar në formimin e grafikëve të përgjigjes së frekuencës, përgjigjes fazore, devijimit të kohës së vonesës në grup, etj.
Për të kuptuar se çfarë saktësisht po redaktohet, janë marrë edhe matje nga rezultatet parapërforcuesçdo kanal, në mënyrë që të mund të studioni në detaje se në çfarë sferash dhe në çfarë niveli janë bërë ndryshime në sinjalin e dhënë në hyrje pa pjesëmarrjen e altoparlantëve. Një ndërfaqe audio USB Behringer U-Control UCA202 u përdor gjithashtu për të kapur të dhëna nga parapërforcuesi.
Më parë, ndërfaqet e zërit janë kalibruar për sa i përket përgjigjes së frekuencës dhe përgjigjes së fazës duke përdorur një "lak", d.m.th., duke aplikuar një sinjal në hyrjen nga dalja e vetë kartës së zërit. Si skedar kalibrimi për mikrofonin matës, është përdorur një skedar kalibrimi për këtë mikrofon i shkarkuar nga Interneti.
Së pari, u morën matjet e secilit folës në pikën e dëgjimit, si dhe kombinimet e altoparlantëve të ndryshëm në duke punuar së bashku. Për secilin kombinim, janë marrë dy matje: me sistemin e kalibrimit të fikur, d.m.th. karakteristikën origjinale, dhe gjithashtu me përpunimin e zërit të sistemit të kalibrimit të integruar, i cili ju lejon të shihni rezultatin e korrigjimit në dëgjim. pikë. Çdo sistem është kalibruar disa herë për të marrë rezultatet më të mira në pikën e dëgjimit.
Pas përfundimit të programit të detyrueshëm të matjes, u bënë rregullime manuale për t'u arritur rezultatet më të mira, si dhe kontrolloni dëgjimin e materialeve zanore dhe episodeve të caktuara nga filmat e njohur me një numër i madh efektet vëllimore.
Matjet fillestare
Për të kuptuar se me cilët altoparlantë duhej të punonim, më poshtë janë përgjigjet e frekuencës së të gjithë altoparlantëve veçmas, të marra në fushën e afërt (për çifte, është matur vetëm njëri prej altoparlantëve), d.m.th., kur mikrofoni ndodhet në një distancë prej rreth 20 cm nga qendra e tweeter-it. Fatkeqësisht, edhe me këtë matje nuk ishte e mundur të shmangej ndikimi i karakteristikave të dhomës, por është minimal.
Vandersteen Model 1C | |
Gunga në 58 Hz është për shkak të ndikimit të dhomës në rezultatet e matjes. Përgjigja e frekuencës është mjaft uniforme. | |
KEF Cresta | |
Një rritje deri në pothuajse 1 kHz e dallon shumë këtë altoparlant nga të tjerët, gjë që paraqet një problem shtesë për sistemet e kalibrimit në drejtimin e përgjigjes së frekuencës në përputhje me altoparlantët e përparmë. | |
AAD C-100 | |
Rythmik F15 | |
Të gjithë folësit në një tabelë |
Simulimi i ndikimit të dhomës në përgjigjen e frekuencës përfundimtare kur lidhni altoparlantët e përparmë dhe nënvuferin është mjaft afër realitetit, i cili u mor si rezultat i matjeve të mëvonshme:
Grafiku i llogaritur i përgjigjes së frekuencës në pikën e dëgjimit në simulatorin e dhomës REW
Sistemet e testuara të kalibrimit
- Audyssey 2EQ (bazuar shkurtimisht në matjet e vjetra të marrësit Onkyo TX-N717)
- Redaktimi manual i kanalit të nënvuferit duke përdorur Behringer FBQ2496
- Redaktimi manual i altoparlantëve të përparmë duke përdorur Behringer FBQ2496
Audyssey
Sistemet e markës Audyssey ndahen në disa klasa, të cilat ndryshojnë në funksionalitet dhe saktësi.
Mundësitë | MultEQ XT32 | MultEQ XT | MultEQ | 2EQ |
Rezolucioni i filtrit | 512x | 16x | 2x | 1x |
Rezolucioni i filtrit (nënvufer) | 512x | 128x | 128x | Nr |
Numri i pozicioneve të matjes | 8 | 8 | 6 | 3 |
Barazimi adaptiv me frekuencë të ulët | ka | ka | ka | Nr |
Crossover, polaritet, vonesa, nivele | ka | ka | ka | ka |
Funksionimi i sistemit të korrigjimit të përgjigjes së frekuencës dhe përgjigjes së fazës bazohet në një filtër kompleks FIR (FIR), i cili lejon një korrigjim mjaft të saktë të përgjigjes origjinale të frekuencës në pika të shumta. Klasa të ndryshme Sistemet Audyssey kanë rezolucione të ndryshme të filtrit, domethënë ato ofrojnë saktësi të ndryshme të redaktimit të zërit.
Pas kalibrimit, përdoruesit janë në dispozicion të mënyrave të mëposhtme, të cilat ndryshojnë në kurbën përfundimtare:
- Smooth (Muzikë për Onkyo) - përgjigja më e barabartë e frekuencës për të dëgjuar në fushën e afërt.
- Referenca (Film për Onkyo) - përgjigje e optimizuar e frekuencës për tingullin natyror (sipas zhvilluesve të sistemit) me një përmbysje në rajonin HF dhe një rënie të lehtë në një frekuencë prej 2 kHz. Rrotullimi me frekuencë të lartë rekomandohet bazuar në kërkesat THX për të arritur zërin në kinematë shtëpiake që është afër zërit në kinema të mëdha.
- Bypass-i i përparmë (nuk përdoret në Onkyo) - një modalitet për ata që kanë investuar shumë para në akustikën e përparme dhe dizajnin akustik të dhomës (ose që thjesht pëlqejnë mënyrën se si tingëllojnë frontet pa përpunim shtesë). Në këtë rast, korrigjimi i altoparlantëve të mbetur është i lidhur me përgjigjen e frekuencës së altoparlantëve të përparmë.
Një tipar i sistemit të kalibrimit Audyssey është pamundësia e ndryshimit manual të filtrave të llogaritur duke redaktuar përgjigjen e frekuencës. Ose përdoruesi zgjedh një nga mënyrat e ofruara nga makina, ose refuzon dhe mund të përdorë një barazues grafik të veçantë, i cili nuk mund të ndizet ndërsa një nga mënyrat Audyssey është në përdorim. E vetmja mënyrë që përdoruesi mund të ndikojë në përgjigjen e frekuencës që rezulton (të paktën në zbatimin e Onkyo) është të ndryshojë pak tonin sipas shijes duke rregulluar frekuencat e ulëta dhe të larta.
Të gjithë parametrat e tjerë, si nivelet, vonesat, cilësimet e kryqëzimit, etj., mund të modifikohen manualisht.
Audyssey 2EQ
Audyssey 2EQ është një sistem bazë kalibrimi dhe përveç funksioneve tipike të kryqëzimit dhe vonesës, ai kryen korrigjimin e altoparlantëve me filtra me rezolucion bazë në rajonin me frekuencë mesatare/të lartë pa mbështetje për korrigjimin e kanalit të nënvuferit.
Një shembull i sistemit Audyssey 2EQ për modifikimin e përgjigjes së frekuencës (dalje nga parapërforcuesi Onkyo 717)
Ndryshimet në përgjigjen e frekuencës bëhen vetëm në rajonin e frekuencave të mesme dhe të larta duke filluar nga 1 kHz, gjë që lejon zgjidhjen e vetëm një problemi - barazimin e karakteristikave të altoparlantëve të ndryshëm në këto frekuenca.
Në fakt, në këtë sistem bazë nuk ka korrigjim të dhomës, efekti i të cilit manifestohet kryesisht në rajonin e frekuencës së ulët. Korrigjimi është i mundur vetëm manualisht duke përdorur barazuesin grafik të integruar, i cili aktivizohet vetëm kur çaktivizoni cilësimet e korrigjimit të përgjigjes së frekuencës Audyssey në meny. Dhe nëse jeni me fat dhe e vetmja gunga në kushtet tuaja është saktësisht në 63 Hz, atëherë ajo do të hiqet në mënyrë efektive me dorë. Në raste të tjera, ndikimi i gjerë dhe frekuenca fikse e barazuesit grafik nuk do të lejojë heqjen e gungave në përgjigjen e frekuencës pa ndikuar në zonat fqinje. Kanali i nënvuferit mund të përdorë një barazues me një rrjet me frekuencë më të ulët, por përsëri frekuencat janë fikse dhe mund të mos përputhen me ato problematike në dhomën tuaj.
Kur përdorni një marrës me një sistem 2EQ, ne mund të rekomandojmë blerjen e një nën-vuferi me sistemin e vet të kalibrimit ose përdorimin e një pajisjeje shtesë për korrigjimin e përgjigjes së frekuencës midis marrësit dhe nën-vuferit, i cili mund të jetë ose automatik ose manual (barazues parametrik). Në këtë rast, të paktën frekuencat më të ulëta do të riprodhohen në mënyrë korrekte dhe gjithçka mbi frekuencën e nënvuferit do të riprodhohet "siç është".
Audyssey MultiEQ XT32 në marrësin Onkyo TX-NR818
Barazimi i kanaleve kryesore
Sistemi MultiEQ XT32 është më i vjetri në gamën e sistemeve nga Audyssey. Zakonisht është i pajisur me pajisje të linjës së lartë, por ndonjëherë XT32 mund të gjendet edhe në klasën e mesme të marrësve.
Grafiku i përgjigjes së frekuencës së kanalit të majtë para dhe pas kalibrimit në modalitetet Film dhe Muzikë:
Kurba e kuqe është përgjigja e frekuencës së kanalit të majtë në modalitetin Pure Direct, ajo blu është në modalitetin "Kinema", ajo e gjelbër është në modalitetin "Muzikë".
Grafikët e përgjigjes së frekuencës tregojnë punën e shkëlqyer të XT32 si në rrafshimin e përgjigjes së frekuencës në zonën e gungave ashtu edhe në tërheqjen e uljeve (sa të jetë e mundur).
Modalitetet "Kinema" dhe "Muzikë" ndryshojnë vetëm në një frekuencë prej rreth 2 kHz dhe në rajonin HF pas 6 kHz deri në fund të diapazonit. Për të ilustruar ndryshimet në redaktim, le të shohim përgjigjen e frekuencës së kanalit të majtë, të marrë nga dalja e para-amplifikuesit:
Kurba e kuqe - përgjigja e frekuencës së kanalit të majtë nga parapërforcuesi në modalitetin Pure Direct, blu - në modalitetin "Kinema", jeshile - në modalitetin "Muzikë"
Në pjesën tjetër të gamës, dallimet midis "Kinemasë" dhe "Muzikës" janë aq të vogla sa mund të neglizhohen. Në të ardhmen, të gjitha përgjigjet e frekuencës do të shfaqen vetëm për modalitetin "Kinema".
Grafiku i përgjigjes së frekuencës së kanalit të duhur para dhe pas kalibrimit në modalitetin "Kinema":
Kurba e kuqe është përgjigja e frekuencës së kanalit të duhur në modalitetin Pure Direct, ajo blu është në modalitetin "Kinema", ajo e gjelbër është në modalitetin "Muzikë"; sipër janë grafika nga parapërforcuesi, më poshtë janë grafika nga mikrofoni
Këtu shohim redaktim agresiv të përgjigjes së frekuencës në rajonin me frekuencë të ulët dhe një redaktim më të relaksuar në frekuencën e mesme dhe të lartë.
Gjithashtu, një nga veçoritë e XT32 është dëshira maniake për të korrigjuar përgjigjen e frekuencës edhe kur altoparlantët praktikisht ndalojnë së luajturi. Në këtë rast, diapazoni i frekuencës së altoparlantëve të përparmë fillon nga 38 Hz, por për shkak të dhomës ata ende luajnë nga 30 Hz. Por Audyssey rrit sinjalin deri në 10 Hz (këtu vetëm në kanalin e majtë), gjë që mund të mbingarkojë altoparlantët dhe amplifikatorin në nivele të larta volumi kur nuk përdoret një subwoofer i veçantë.
Le të kthehemi te përgjigja e frekuencës së altoparlantëve të majtë dhe të djathtë përpara kalibrimit dhe të shohim se sa e ndryshme është përgjigja e frekuencës në zonën e problemit me frekuencë të ulët, ku dhoma ndikon më shumë:
Kurba e kuqe - përgjigja e frekuencës së kanalit të majtë në modalitetin Pure Direct, blu - kanali i duhur
Në grafik shohim se altoparlantët me të njëjtën përgjigje frekuence në fushën e afërt janë mjaft të ndryshëm në përgjigjen e frekuencës në pikën e dëgjimit, sepse ata janë të vendosur në vende të ndryshme në dhomë dhe kanë një model të ndryshëm reflektimi për shkak të mungesës së plotë. simetri në rregullim.
Por pas ekzekutimit të Audyssey XT32, ndryshimi në përgjigjen e frekuencës zvogëlohet ndjeshëm:
Kurba e kuqe është përgjigja e frekuencës së kanalit të majtë në modalitetin "Kinema", ajo blu është përgjigja e frekuencës së kanalit të djathtë në modalitetin "Kinema".
Tani le të shohim një kanal qendror mjaft kompleks, i cili ka një përgjigje të fortë të pabarabartë të frekuencës:
Kurba e kuqe - përgjigja e frekuencës së kanalit qendror në modalitetin Pure Direct, blu - në modalitetin "Kinema".
Siç mund ta shihni, Audyssey korrigjoi në mënyrë të përsosur përgjigjen e frekuencës në rajonin me frekuencë të ulët. Por në këtë rast, ajo që është më e rëndësishme nuk është vetë përgjigja e frekuencës, por konsistenca me altoparlantët e përparmë, në mënyrë që kanali qendror të mos dalë shumë në tingullin e tij. Për ta bërë këtë, le të shohim grafikët e përgjigjes së frekuencës së të tre altoparlantëve të përparmë - majtas, djathtas dhe qendra:
Kurba e kuqe - përgjigja e frekuencës së kanalit të majtë në modalitetin "Kinema", blu - kanali i djathtë, jeshil - kanali qendror
Dhe përsëri dua të përshëndes sistemin Audyssey XT32 për punën që ka bërë në korrigjimin e karakteristikave të altoparlantëve krejtësisht të ndryshëm. Në praktikë, gjatë dëgjimit kur modaliteti "Kinema" është i aktivizuar, kanali qendror përzihet me të vërtetë aq harmonikisht me altoparlantët e përparmë sa ndonjëherë duket se e gjithë akustika është nga i njëjti prodhues.
Për të kuptuar se si tingëllon sistemi pa kalibrim, përsëri, thjesht shikoni grafikët e përgjigjes së frekuencës të tre sistemeve në modalitetin Pure Direct:
Kurba e kuqe - përgjigja e frekuencës së kanalit të majtë në modalitetin Pure Direct, blu - kanali djathtas, jeshil - kanali qendror
EQ subwoofer
Tani le të kalojmë në përgjigjen e frekuencës së kanalit të nënvuferit dhe të shohim se çfarë mund të na ofrojë XT32 këtu:
Kurba e kuqe - përgjigja e frekuencës së kanalit të nënvuferit në modalitetin Pure Direct, blu - në modalitetin "Kinema"
Shohim që përgjigja e frekuencës së subwoofer-it është korrigjuar mjaft mirë, për aq sa është e mundur me vendosjen e tij aktuale.
Në përgjigjen e frekuencës nga daljet e para-amplifikuesit, mund të merrni parasysh kurbën e korrigjimit të kanalit të nënvuferit:
Kurba e purpurt është përgjigja e frekuencës së kanalit të nënvuferit nga dalja e parapërforcuesit në modalitetin Pure Direct, kurba blu është në modalitetin "Kinema".
Edhe këtu, tendenca e Audyssey për të niveluar përgjigjen e frekuencës në çdo frekuencë është e dukshme: edhe në frekuenca mbi 400 Hz, sistemi përpiqet të nxjerrë tinguj që nën-vuferi nuk e riprodhon më fare. Është mirë që kjo të ndodhë kur kryqëzimi po funksionon, kështu që nuk shkakton pasoja negative. Në anën tjetër të përgjigjes së frekuencës në këtë subwoofer, gjithçka është mjaft normale, pasi është fizikisht i aftë të riprodhojë frekuenca nga 10 Hz. Por me një subwoofer tjetër që luan, le të themi, nga 30 Hz, mund të lindin probleme për shkak të mbivlerësimit të nivelit të sinjalit në frekuencat më të ulëta, nën 30 Hz, ku nën-vuferi nuk luan më asgjë. Dhe nëse një filtër me kalim infra të ulët nuk është i integruar në të, atëherë amplifikuesi mund të amplifikojë në boshe një sinjal që altoparlanti nuk është në gjendje të riprodhojë. Kjo duhet të merret parasysh kur luani muzikë ose filma në nivele të larta të volumit.
Barazimi i kanaleve të pasme
Sa i përket altoparlantëve të kanaleve të pasme, gjithçka është përmirësuar gjithashtu mirë, gjë që është qartë e dukshme në grafikët e përgjigjes së frekuencës së këtyre altoparlantëve në modalitetin "Kinema":
Kurba e kuqe është përgjigja e frekuencës së kanalit të majtë të pasmë në modalitetin "Kinema", kurba blu është kanali i pasmë i djathtë
Fundi
Ne u siguruam që Audyssey të korrigjojë mjaft mirë përgjigjen e frekuencës së secilit altoparlant, që do të thotë se sinjali nga secili altoparlant individual do të arrijë pikën e dëgjimit sa më të besueshëm të jetë e mundur.
Por çfarë ndodh nëse i njëjti sinjal luhet në të dy kanalet - për shembull, zëri ose ndonjë sinjal tjetër mono?
Për ta bërë këtë, le të hedhim një vështrim në përgjigjen komplekse të frekuencës së altoparlantëve të përparmë së bashku me nënbuferin:
Kurba e kuqe është përgjigja e frekuencës së triponikës në modalitetin Pure Direct, ajo blu është në modalitetin "Kinema".
Puna e dy altoparlantëve të përparmë së bashku me nën-vuferin pas korrigjimeve të Audyssey në modalitetin Cinema korrigjoi shumë nga problemet, megjithëse ndryshimi nuk ishte aq dramatik sa krahasimi i ndryshimeve në secilin kanal veç e veç.
Ajo që vërtet i mungon marrësit Onkyo është aftësia për të ruajtur disa cilësime korrigjimi për situata të ndryshme: meqenëse korrigjimi në Audyssey është mjaft i detajuar, kur situata ndryshon, modifikimi aktual bëhet jo plotësisht i rëndësishëm. Për shembull, mund të përdorni cilësime të shumta për situatat e mëposhtme:
- duke dëgjuar me një subwoofer për një person (muzikë për veten tuaj)
- dëgjimi me dy subwoofer (ose një subwoofer të dytë) për një person me një ekran të hapur projektor (kinema për veten tuaj)
- duke dëgjuar me dy subwooferë për disa njerëz në divan (kinema familjare)
- opsionet e testimit për të zgjedhur pozicionin më të mirë të pikave matëse
Gjithashtu mungon vizualizimi i ndryshimeve të bëra. Në YPAO mund të shikojmë cilësimet parametrike të barazimit duke kopjuar cilësimet në modalitetin manual. Në MCACC, rregullimet e bëra janë të dukshme në menynë e cilësimeve të barazuesit grafik. Dhe vetëm në rastin e marrësve Onkyo, përdoruesi është i privuar nga çdo mundësi për të vlerësuar vizualisht ndryshimet e bëra pa ndihmën e një mikrofoni të jashtëm, vlerësimi i ndryshimeve është i mundur vetëm me vesh. Por kjo nuk është një veçori e Audyssey, por zbatimi i saj nga Onkyo. Në marrës moderne Denon, mund të shikoni kurbën e korrigjimit për çdo kanal dhe të vlerësoni ndryshimet e tij me matje të ndryshme.
MCACC i avancuar në marrësin Pioneer SC-LX56
Pioneer përdor një sistem kalibrimi akustik me shumë kanale, të quajtur MCACC në marrësit e tij. Përveç funksioneve standarde për përcaktimin e altoparlantëve të lidhur, distancën me ta dhe nivelin e fitimit, MCACC ofron redaktimin e përgjigjes së frekuencës, si dhe premton rregullim të reverberimeve dhe kohës së vonesës së grupit.
Pas kryerjes së kalibrimit automatik, të gjitha cilësimet, me përjashtim të kontrollit të fazës, janë të disponueshme për rregullim manual. Për lehtësi më të madhe, ka 6 vendndodhje memorie për ruajtje opsione të ndryshme cilësimet për situata të ndryshme.
Procesi i plotë i kalibrimit kërkon një kohë mjaft të gjatë, gjatë së cilës një sërë sinjalesh testimi luhen në një rreth në faza të ndryshme. Matja kryesore kryhet në një pikë në pozicionin e mikrofonit pasi të përfundojë, rezultati regjistrohet automatikisht në memorie dhe menyja kryesore shfaqet në ekran; Ekziston një video e procesit të plotë të kalibrimit.
Pas përfundimit të kalibrimit, opsioni “Symmetry” u ruajt në qelizën e memories M1 dhe opsioni “All ch adj” u ruajt në qelizën e kujtesës M2. Në të ardhmen, përcaktimet M1 dhe M2 do të përdoren në grafikët, që korrespondon me këto opsione.
Barazimi i kanaleve kryesore
Mekanizmat për modifikimin e përgjigjes së frekuencës janë:
- Barazues grafik me 9 breza për të gjitha kanalet përveç subwooferit, me frekuenca 63, 125, 250, 1k, 2k, 4k, 8k, 16k (Hz).
- Barazues parametrik për korrigjimin e valëve në këmbë (vetëm minus) me një frekuencë qendrore prej 63 Hz. Përdoret për nënvuferin, kanalin qendror dhe të gjithë altoparlantët e tjerë.
Për çdo palë altoparlantësh, konfigurohet një nga opsionet e madhësisë - i madh ose i vogël. Kur vendoset në Large, i gjithë diapazoni i frekuencave u jepet altoparlantëve kur vendoset në Small, jepen vetëm frekuencat mbi frekuencën e ndërprerjes dhe gjithçka më poshtë shkon në subwoofer. Është e papërshtatshme që frekuenca e ndërprerjes për altoparlantët e tipit të vogël është vendosur në një për të gjithë nga 50 në 200 Hz, ndërsa deri në 80 Hz ka vetëm dy vlera: 50 dhe 80 Hz, gjë që kufizon paksa rregullimin e saktë të kryqëzimit në altoparlantët e përdorur.
Një veçori interesante është aftësia për të rregulluar pjerrësinë e kurbës së synuar në intervalin HF duke filluar nga 2 kHz. Në cilësimin e kurbës X, mund të zgjidhni nivelin e uljes së pjerrësisë dB për oktavë.
Kurba e kuqe - përgjigja e frekuencës së kanalit të majtë në modalitetin Pure Direct, blu - MCACC M1, jeshile - MCACC M2
Cilësimet e barazuesit grafik të kanalit të majtë:
Vendosja e korrigjimit të valës në këmbë për altoparlantët e përparmë:
Ndryshimi në përgjigjen e frekuencës në grafik përkon mjaft mirë me cilësimet e barazuesit grafik për kanalin e majtë dhe filtrin e valëve në këmbë. Puna e barazuesit grafik është qartë e dukshme në rregullimin e gjerë të përgjigjes së frekuencës, në të cilën gunga dhe uljet individuale nuk drejtohen, por ndodh një korrigjim i përgjithshëm i kurbës.
Gjithashtu i vështirë për sistemet e kalibrimit është kanali qendror, i cili dallohet fuqishëm në përgjigjen e frekuencës në frekuencat e ulëta dhe të mesme dhe pa korrigjim tingëllon ndryshe nga çifti i përparmë i altoparlantëve.
Grafiku i përgjigjes së frekuencës së kanalit qendror para dhe pas kalibrimit:
Fatkeqësisht, asnjë mrekulli nuk ndodhi: të gjitha pabarazitë u ruajtën praktikisht në të dy mënyrat e funksionimit të sistemit MCACC. Ky shembull tregon se është më mirë të mos përdorni altoparlantë krejtësisht të ndryshëm së bashku me MCACC, pasi nuk do të jetë e mundur të barazoni përgjigjen e tyre të frekuencës.
Barazimi i kohës së vonesës në grup
Një nga veçoritë kryesore të MCACC është lufta kundër reverberimit dhe barazimi i kohës së vonesës së grupit. Ka shumë video të bukura për këtë temë në faqen e internetit të kompanisë që tregojnë se çfarë shqetësimi ekziston përpara kalibrimit dhe se pas kalibrimit, ndodh nirvana e zërit.
Epo, tani momenti më emocionues - le të shohim kohën e tepërt të vonesës së grupit pa korrigjim dhe pas kalibrimit.
Kurba e zezë - vonesa e grupit në modalitetin Pure Direct, e kuqe - pas kalibrimit MCACC, jeshile - pas kalibrimit Audyssey
As këtu nuk ndodhi një mrekulli: grafiku i kohës së tepërt të vonesës së grupit mbeti praktikisht i pandryshuar.
Për krahasim, shfaqet i njëjti grafik i kanalit të majtë nga marrësi Onkyo 818 në modalitetin "Music". Mund të shihet se në disa vende vonesa është edhe më e vogël, pavarësisht mungesës së deklaratave të ngjashme reklamuese nga Onkyo.
Mund të duket se matjet janë bërë gabimisht, por vetë marrësi na jep grafikët para dhe pas kalibrimit, të cilët tregojnë se të gjithë grafikët janë zhvendosur vetëm lart, por në frekuencë kanë mbetur praktikisht të pandryshuar.
Në të gjitha matjet e tjera të altoparlantëve individualë dhe gjatë funksionimit të tyre të njëkohshëm, ndryshimi në rregullimin e kohës së vonesës së grupit nuk është gjithashtu i dukshëm, megjithëse gjatë matjes në modalitetet M1 dhe M2, kontrolli i fazës "Faza e plotë e brezit të plotë" zgjidhej gjithmonë.
EQ subwoofer
Grafiku i përgjigjes së frekuencës së kanalit të nënvuferit para dhe pas kalibrimit:
Kurba e kuqe - përgjigja e frekuencës së nënvuferit përpara kalibrimit, blu - MCACC M1, jeshile - MCACC M2
Grafiku tregon se praktikisht nuk është bërë asnjë korrigjim. Kjo nuk është për t'u habitur, pasi thjesht nuk ka një barazues grafik të veçantë për nënvuferin (përveç Audyssey, Onkyo 818 ka një barazues grafik manual për nënvuferin me një grup frekuencash përkatëse), dhe mospërputhjet në grafikë janë vetëm për shkak për funksionimin e filtrit të valëve në këmbë në frekuencë 63 Hz.
Meqenëse nën-vuferi ka një përgjigje të vetën të frekuencës mjaft të sheshtë dhe është zgjedhur vendndodhja optimale, duke rregulluar ndërprerjen në një frekuencë prej 50 ose 80 Hz, mund të merrni një përgjigje të frekuencës plotësisht të sheshtë të nënvuferit. Me një tjetër subwoofer ose një prerje tjetër, gjërat mund të jenë më të tmerrshme.
Fundi
Grafiku i përgjigjes së frekuencës në modalitetin trifonik me një frekuencë ndërprerjeje në nën-vuferin prej 80 Hz:
Kanali majtas dhe djathtas në modalitetin trifonik
Kur altoparlantët e përparmë dhe nënvuferi funksionojnë njëkohësisht, përgjigja e frekuencës që rezulton është mjaft e parashikueshme dhe nuk sjell ndonjë surprizë në formën e uljeve dhe gungave që shfaqen.
Në përgjithësi, në lidhje me sistemin MCACC, mund të themi se është mjaft standard dhe ju lejon të konfiguroni gjithçka automatikisht parametrat bazë, si dhe një barazues grafik me 9 breza dhe një barazues parametrik të valëve në këmbë me 3 breza.
Qasja për zbatimin e sistemit MCACC është mjaft interesante dhe ka shumë mundësi për redaktim manual, analizë të rezultatit dhe aftësinë për të ruajtur cilësimet në disa qeliza memorie, por gjithçka kufizohet nga dy të meta shumë serioze:
- Përdoret një barazues grafik konvencional me frekuenca qendrore fikse. Për sistem modern Kalibrimi kërkon një mekanizëm më të saktë, dhe nëse në vend të një barazuesi grafik do të kishte një barazues parametrik, atëherë do të kishte shumë më tepër opsione personalizimi.
- Kufizoni të gjitha cilësimet në 63Hz në fund. Nuk është e qartë pse, por nuk ka asnjë mënyrë për të rregulluar asgjë nën 63 Hz, megjithëse problemet kryesore të akustikës së dhomës qëndrojnë në këtë gamë. Në fakt, për shkak të këtij kufizimi, nuk ka barazues për nënvuferin.
YPAO RSC në marrës Yamaha RX-A2010
Sistemi i kalibrimit YPAO i pronarit të Yamaha-s ofron funksione të përgjithshme për vendosjen e niveleve, vonesën, cilësimet e kryqëzimit dhe korrigjimin e përgjigjes së frekuencës kanal pas kanali.
Për çdo kanal, 7 filtra parametrikë të barazimit janë caktuar për modifikim manual (me përjashtim të kanalit të subwooferit, ku ka vetëm 4 filtra). Për çdo filtër, mund të vendosni frekuencën qendrore, nivelin e korrigjimit dhe faktorin e cilësisë së filtrit.
Frekuenca qendrore e filtrit zgjidhet nga një listë me 28 frekuenca fikse: 31.3; 39.4; 49.6; 62,5; 78,7; 99.2; 125.0; 157,5; 198.4; 250,0; 315.0; 396,9; 500.0; 630.0; 793.7; 1.00 mijë; 1,26 mijë; 1,59 mijë; 2.00 mijë; 2,52 mijë; 3,17 mijë; 4.00 mijë; 5,04 mijë; 6,35 mijë; 8.00 mijë; 10,1k; 12,7 mijë; 16.0k (Hz). Për kanalin e nënvuferit, përdoren vetëm 10 frekuencat e para deri në 250 Hz përfshirëse.
Faktori i cilësisë (Q) mund të vendoset nga 0,5 në 10,08: 0,5; 0,63; 0,794; 1; 1,26; 1,587; 2; 2,52; 3,175; 4; 5.040; 6.35; 8; 10.08.
Pas kalibrimit automatik, përdoruesit i ofrohen tre opsione për korrigjimin e barazuesit:
- Mesatare - përgjigja më e barabartë e frekuencës
- Përgjatë pjesës së përparme - të gjithë altoparlantët tërhiqen deri në përgjigjen e frekuencës së altoparlantëve të përparmë
- Përgjigja natyrale - e optimizuar e frekuencës për tingullin natyror (sipas zhvilluesve të sistemit)
Gjatë testimit të përshkruar, si dhe testimit të YPAO në marrësin Yamaha 1071, u zbulua se aktualisht ekzistojnë dy sisteme të ndryshme kalibrimi:
- YPAO RSC (Kontrolli i reflektuar i zërit)
Të dy sistemet janë shumë të ngjashëm në pamje dhe funksionalitet me një përjashtim: sistemi YPAO përdor vetëm një barazues me 7 breza për kanal (4 breza për nënvufer) si një mekanizëm korrigjimi të përgjigjes së frekuencës, ndërsa sistemi YPAO RSC përdor një filtër më kompleks në Përveç kësaj për altoparlantët e përparmë dhe kanalin qendror - me sa duket një filtër FIR (FIR).
Pasi të kryhet kalibrimi automatik në sistemin YPAO RSC, llogaritet një filtër kompleks i redaktimit të përgjigjes së frekuencës (ne thjesht do ta quajmë atë RSC), dhe në krye të tij, duke përdorur barazuesin parametrik ekzistues, bëhen modifikime për të marrë disa opsione të barazimit (" Mesatare, "Edge", "Natyrore").
Kur kopjoni cilësimet e një prej mënyrave në një barazues manual, marrim saktësisht të njëjtat modifikime në dalje si kur përdorni modalitetin "automatik" përkatës. Megjithatë, kur rivendoset EQ manual, grafiku i daljes së paraampit nuk është linear, por përmban modifikime të filtrit RSC që nuk mund të çaktivizohen.
Sistemi YPAO përdor vetëm EQ parametrike për të gjitha kanalet dhe kur ai është i pavlefshëm, dalja është e sheshtë dhe e drejtë, ashtu si YPAO RSC për kanalet rrethuese dhe subwoofer.
Barazimi i kanaleve kryesore
Grafiku i përgjigjes së frekuencës së kanalit të majtë para dhe pas kalibrimit:
Kurba e kuqe është grafiku i përgjigjes së frekuencës pa korrigjim, bluja është në modalitetin "Natyror", ajo jeshile është në modalitetin "Mesatar".
Ndryshimet në rajonin me frekuencë të ulët bëhen nga filtri RSC, dhe në rajonin me frekuencë të lartë ndryshimi është për shkak të cilësimeve të ndryshme të barazuesit parametrik.
Le të shohim grafikët nga parapërforcuesi i kanalit të majtë:
Kurba e zezë - grafiku i përgjigjes së frekuencës pa korrigjim, i kuq - në modalitetin "Natyror", blu - në modalitetin "Përpara", jeshile - në modalitetin "Mesatar"
Dhe kjo është ajo që përdoruesi sheh në barazuesin parametrik të kanalit të majtë pas kopjimit të cilësimit "Natyror":
Dhe kopjimi i cilësimit "Mesatar":
Në barazuesin parametrik, vetëm modifikimi i përgjithshëm për frekuencat e ulëta dhe frekuencat e larta rregullohet automatikisht, dhe dy mënyrat "Natyrore" dhe "Mesatare" ndryshojnë vetëm në modifikimin për frekuencat e larta: për "Mesatar" modifikimi është plus +2,5 dB. në një frekuencë prej 12.7 kHz, për redaktim "Natyror" -0.5 dB në një frekuencë prej 5 kHz dhe -1.5 dB në një frekuencë prej 16 kHz.
Në modalitetin Edge, mbetet vetëm filtri RSC dhe EQ parametrike rivendoset. Nëse përdoruesi kopjon çdo modalitet barazues dhe më pas e rivendos atë, atëherë dalja e paraamplifikuesit do të jetë pikërisht kurba RSC "Edge".
Fatkeqësisht, ne nuk kemi gjetur një mënyrë për të çaktivizuar filtrin RSC, kështu që në fakt mund të modifikohet vetëm barazuesi parametrik. Por në praktikë kjo nuk është e nevojshme, pasi filtri RSC korrigjon saktë gunga në përgjigjen e frekuencës dhe mund të plotësohet me cilësimet manuale të barazuesit parametrik.
Ndryshimet në rajonin deri në afërsisht 500 Hz kanë një amplitudë maksimale deri në 6-7 dB, pas së cilës amplituda zvogëlohet gradualisht deri në 3-4 kHz. Redaktimi në rajonin me frekuencë të lartë i lihet barazuesit parametrik, të cilin çdo përdorues mund ta ndryshojë për t'iu përshtatur preferencave të tij.
Një surprizë e pakëndshme ishte rritja në rajonin e frekuencave më të ulëta F3 (frekuenca e ndërprerjes në nivelin -3 dB), ku altoparlantët e përparmë praktikisht nuk luajnë më, por filtri RSC përpiqet të zgjasë përgjigjen e frekuencës duke përdorur fitimin maksimal deri në disa herc. E njëjta gjë mund të shihet në funksionimin e Audyssey XT32, të cilin ne nuk mund ta modifikojmë. YPAO ka një barazues parametrik në krye të filtrit automatik, por, për fat të keq, nuk ishte e mundur të korrigjohej ky interval, pasi frekuenca e tij minimale është vetëm 31.3 Hz. Duhet ta merrni parasysh këtë kur vendosni akustikën në shtëpi ose lidhni një subwoofer - atëherë grafiku fillon të bjerë nën frekuencën e ndërprerjes:
Kurbë e zezë - grafik i përgjigjes së frekuencës pa korrigjim, e kuqe - në modalitetin "Përpara", blu - një përpjekje për të korrigjuar barazuesin në 31.3 Hz, jeshile - kur kryqëzimi për nënvuferin është i ndezur në një frekuencë prej 80 Hz
Por këtë veçori manifestohet vetëm në altoparlantët e përparmë për altoparlantët e kanalit qendror nuk ka rritje në frekuencat më të ulëta.
Grafiku i përgjigjes së frekuencës së kanalit të duhur para dhe pas kalibrimit (për qartësi, përgjigja e frekuencës nga mikrofoni dhe parapërforcuesi njëkohësisht):
Kurba e kuqe është një grafik i përgjigjes së frekuencës së kanalit të duhur para korrigjimit, e gjelbërta është në modalitetin "Mesatarisht", ajo blu është në modalitetin "Natyror".
Tani le të kalojmë te altoparlanti qendror, i cili është mjaft kompleks për shkak të përgjigjes unike të frekuencës:
Kurba e kuqe është një grafik i përgjigjes së frekuencës së kanalit qendror përpara korrigjimit, e gjelbër është në modalitetin "Mesatar", ajo blu është në modalitetin "Natyror".
Fatkeqësisht, të gjitha tiparet e përgjigjes së frekuencës mbetën në grafik edhe pasi u aplikuan të gjithë filtrat, d.m.th. YPAO nuk ishte në gjendje të nivelonte kurbën e përgjigjes së frekuencës dhe ta afronte atë me altoparlantët e përparmë.
Por ne kemi një barazues parametrik në magazinë, me të cilin mund të përpiqeni të korrigjoni manualisht përgjigjen e frekuencës. Duke përdorur shembullin e kanalit qendror, ne do të vlerësojmë aftësitë e një barazuesi parametrik në modifikimin e përgjigjes së frekuencës në rajonin me frekuencë të ulët/frekuencë të mesme. Disa modifikime dhe në fund:
Kurba e kuqe është një grafik i përgjigjes së frekuencës së kanalit qendror përpara korrigjimit, bluja është në modalitetin "Front" me modifikim manual të barazimit.
Pas redaktimit manual, grafiku i përgjigjes së frekuencës u nivelua mjaft mirë, gjë që vërehet edhe nga veshi: qendra tani nuk bie aq shumë në tingullin e saj.
Dhe nëse mbivendosni grafikun e përgjigjes së frekuencës së altoparlantit qendror në grafikun e përgjigjes së frekuencës së altoparlantit të majtë, mund të shihni që përgjigja e frekuencës tani nuk ndryshon aq shumë:
Kurba e kuqe është grafiku i përgjigjes së frekuencës së kanalit të majtë, kurba blu është kanali qendror pas korrigjimit manual
Në grafikun nga parapërforcuesi mund të shihni ndryshimin në filtra:
Kurba e kuqe është një grafik i përgjigjes së frekuencës së kanalit qendror nga dalja e parapërforcuesit deri në korrigjim, blu - në modalitetin "Mesatar", jeshile - në modalitetin "Përpara" me modifikim manual të barazimit në brez deri në 2 kHz
Redaktimi i barazuesit parametrik për kanalin qendror në ekran duket kështu:
Barazimi i kanaleve të pasme dhe subwoofer
Tani le të kalojmë në kanalet e pasme. Pas shikimit të grafikëve të përgjigjes së frekuencës nga parapërforcuesi, bëhet e qartë se vetëm një barazues i rregullt parametrik funksionon në pjesën e pasme pa një filtër kompleks RSC:
Kurba e kuqe është grafiku i përgjigjes së frekuencës në modalitetin "Natyror", ajo blu është në modalitetin "Përpara", ajo e gjelbër është në modalitetin "Mesatar".
Ose inxhinierët e Yamaha vendosën që kanalet e pasme nuk kanë nevojë për saktësi shtesë, ose fuqia përpunuese e procesorit të integruar DSP nuk është ende e mjaftueshme.
Ne mund të gjejmë saktësisht të njëjtat grafikë në të gjitha kanalet e një sistemi konvencional YPAO (pa prefiksin RSC), ku përdoret vetëm një barazues parametrik si një mjet për rregullimin e përgjigjes së frekuencës (për shembull, në marrësin Yamaha RX-V1071).
Fatkeqësisht, jo vetëm altoparlantët e pasmë, por edhe kanali i subwooferit u privuan nga një filtër kompleks RSC:
Kurba e gjelbër është një grafik i përgjigjes së frekuencës së kanalit të nënvuferit nga parapërforcuesi përpara korrigjimit me një kryqëzim prej 200 Hz, ai blu është në modalitetin "Natyror".
Prandaj, në modalitetin automatik, përgjigja e frekuencës së nën-vuferit është praktikisht e pandryshuar:
Kurba e kuqe është një grafik i përgjigjes së frekuencës së kanalit të nënvuferit përpara korrigjimit me një kryqëzim 200 Hz, blu - në modalitetin "Natyror", jeshile - në modalitetin "Mesatarisht".
Përpjekjet për të korrigjuar përgjigjen e frekuencës së kanalit të nënvuferit me një barazues parametrik nuk dhanë shumë rezultate, sepse në frekuenca më të ulëta hapi i frekuencës qendrore të barazuesit është mjaft i madh:
Kurba e zezë është një grafik i përgjigjes së frekuencës së kanalit të nënvuferit përpara korrigjimit me një kryqëzim 200 Hz, ai i kuq është pas redaktimit manual me një barazues parametrik
Për të vlerësuar aftësitë e barazuesit në kanalin e nënvuferit, u lidh një subwoofer i dytë dhe u bënë përpjekje për të korrigjuar përgjigjen e frekuencës duke përdorur cilësimet manuale. Por edhe në këtë rast, për shkak të grupit të kufizuar të frekuencave qendrore të barazuesit, gjithashtu nuk ishte e mundur të arrihej një ndryshim domethënës, prandaj, për të modifikuar plotësisht kanalin e nënvuferit, është më mirë të përdorni një nën-vufer me kalibrim të integruar. ose një pajisje të veçantë të jashtme (opsioni i përdorimit të një barazuesi parametrik të jashtëm do të përshkruhet më poshtë).
Por për të dy subwooferët, vendosja e kryqëzimit në një frekuencë më të vogël se 80 Hz ju lejon të shmangni luhatjet e mëdha në përgjigjen e frekuencës, e cila për shumë do të jetë mjaft e pranueshme bazuar në rezultatin e marrë.
Redaktimi manual i përgjigjes së frekuencës duke përdorur Behringer FBQ2496
Meqenëse kishim pajisjet e duhura, u vendos të jepet një shembull i mundësisë së korrigjimit manual të zërit duke përdorur një barazues parametrik të jashtëm të lirë për krahasim me sistemet e korrigjimit automatik.
Redaktimi manual i kanalit të nënvuferit
Një barazues parametrik dixhital mjaft popullor u zgjodh si një pajisje e tillë për të rregulluar përgjigjen e frekuencës së nënvuferit si pjesë e shtypësit të reagimit Behringer FBQ2496. FBQ2496 përmban 20 filtra për dy kanale. Për çdo filtër, frekuenca qendrore është vendosur mjaft saktë nga 20 Hz në 20 kHz.
Në rajonin me frekuencë të ulët, hapi varion nga një pjesë e një herc (në fillim të diapazonit) në disa herc: 20.00; 20.23; 20.46; 20.70; 20,94; 21.18 ... 60.49; 61.10; 61,80; 62,52; 63,25 ... 120,5; 121,9; 123.3; 124,7; 126.2... (Hz).
Në rajonin HF, hapi tashmë është dhjetëra e qindra herc: 5.024; 5.082; 5.141; 5200; 5.260; 5.321 ... 19.099; 19.321; 19.544; 19.771; 20 (kHz).
Për të konfiguruar nën-vuferin, u mor përgjigja origjinale e frekuencës, diapazoni i redaktimit u zgjodh nga 10 në 120 Hz dhe filtrat u gjeneruan automatikisht në programin REW, pas së cilës ato u ngarkuan në barazues përmes ndërfaqes MIDI.
Cilësimet e filtrit për modifikimin e përgjigjes së frekuencës së një nënvuferi
Përveç filtrave të gjeneruar automatikisht bazuar në rezultatet e matjes, u shtuan edhe dy filtra të tjerë me parametrat e mëposhtëm:
- Frekuenca 44,2 Hz, fitimi −2 dB, faktori i cilësisë 0,5
- Frekuenca 153 Hz, fitimi −6,5 dB, faktori i cilësisë 0,16
Përgjigja përfundimtare e frekuencës kthen kur nënvuferi funksionon me një ndërprerje prej 200 Hz:
Kurba e gjelbër është përpara se të funksionojë barazuesi, kurba blu është barazuesi që punon me 12 filtra
Në intervalin deri në 67 Hz, grafiku i përgjigjes së frekuencës kthehet pothuajse në një vijë të drejtë, dhe më tej deri në 120 Hz, devijimet nuk i kalojnë 3 dB. Në të ardhmen, është më mirë të vendosni frekuencën e kryqëzimit në 60 ose 80 Hz.
Sidoqoftë, duhet të kuptoni se vetëm kanali i nënvuferit është rregulluar dhe kur ai funksionon së bashku me altoparlantët e përparmë, nëse përgjigja e frekuencës në rajonin me frekuencë të ulët nuk është e saktë për ta, do të duhet të rregulloni cilësimet në varësi të mbivendosja e sinjalit nga subwoofer dhe altoparlantët e përparmë në rajonin e seksionit të frekuencës së zgjedhur.
Redaktimi manual i altoparlantëve të përparmë
Në rastin kur sistemi nuk përdor një subwoofer dhe muzika dëgjohet vetëm përmes altoparlantëve të përparmë të lidhur me një amplifikues stereo, është e mundur të përdoret një barazues parametrik për të korrigjuar tingullin.
Gama e zgjedhur për testin ishte deri në 1 kHz. Matjet u bënë në programin REW të përgjigjes origjinale të frekuencës së dy altoparlantëve, filtrat u gjeneruan automatikisht përgjatë vijës së drejtë të synuar në një nivel prej 75 dB, më pas filtrat u ngarkuan në barazues përmes ndërfaqes MIDI. Nuk u bënë rregullime të mëtejshme në cilësimet e barazimit. Të 20 filtrat kaluan nën kanalin e majtë, vetëm 17 kaluan nën kanalin e djathtë.
Grafiku i përgjigjes së frekuencës nga daljet e barazuesit tregon se filtrat janë formuar mjaftueshëm formë komplekse, në vende me një faktor të ngushtë cilësie, që kërkonte përdorimin e një numri të madh filtrash për çdo kanal.
Ndryshimi i përgjigjes së frekuencës për altoparlantin e majtë:
Kurba e kuqe - përgjigja e frekuencës së altoparlantit të majtë pa funksionimin e barazimit, blu - me barazuesin të ndezur, e zezë - nga dalja e barazimit
Ndryshimi në përgjigjen e frekuencës për altoparlantin e duhur:
Kurba e gjelbër - përgjigja e frekuencës së altoparlantit të djathtë pa funksionimin e barazimit, blu - me barazuesin të ndezur, e zezë - nga dalja e barazuesit
Këtu shohim se për çdo altoparlant individual, grafiku i përgjigjes së frekuencës në rajonin deri në 1 kHz është bërë më i qetë dhe mbeten vetëm ulje që nuk duhet të zgjaten duke ndryshuar amplituda e sinjalit.
Audyssey MultiEQ XT32 në ARC2 (Korrigjim i avancuar i dhomës 2)
Më parë, u konsideruan vetëm zgjidhjet "hardware", kur sistemi i korrigjimit ishte ndërtuar në marrës ose përdorej një barazues parametrik i jashtëm. Por ka edhe zgjidhje softuerike që ju lejojnë të rregulloni sinjalin në përputhje me akustikën e dhomës.
Disavantazhi i kësaj metode është se ajo është e lidhur me një kompjuter si burim sinjali, si dhe përpunimi i vetëm 2 kanaleve stereo. Avantazhi është fleksibiliteti i cilësimeve dhe aftësia për ta përdorur atë në lidhje me çdo amplifikator të integruar.
Sistemi ARC2 (Advanced Room Correction 2) është ndërtuar në bazë të zgjidhjes Audyssey MultiEQ XT32 dhe ju lejon jo vetëm të bëni matje në disa pika, por edhe të shikoni përgjigjen e frekuencës që rezulton për çdo kanal, si dhe të rregulloni objektivin lakoni duke zgjedhur ndonjë paravendosje ose duke e modifikuar manualisht për t'iu përshtatur nevojave tuaja.
Mund të përdorni shtojcën VST në çdo luajtës që mbështet shtesat VST, si dhe për të luajtur çdo tingull në Windows, me kusht që të instalohen disa programe. Për këtë do t'ju duhet:
- ASIO4Të gjitha
- Kabllo virtuale audio
- Procesori ASIO FX
Pasi të keni konfiguruar daljen e të gjithë audios në një kabllo virtuale, aktivizoni shtesën ARC2 VST në programin ASIO FX Processor dhe nxirrni audion në daljen lineare të kartës së zërit.
Për të matur përgjigjen e frekuencës duke përdorur një mikrofon të jashtëm, do t'ju duhet një kartë zanore me mbështetje ASIO dhe një frekuencë kampionimi prej 48 kHz.
Përgjigja e frekuencës së kanalit të majtë të sistemit ARC2:
Kurba e kuqe - përgjigja e frekuencës së altoparlantit të majtë pa ARC2, blu - me ARC2 të aktivizuar, jeshile - me ARC2 me opsionin "Korrigjimi i basit me rreze të plotë" të aktivizuar.
Rezultati i ARC2 është i ngjashëm me atë që shohim pas Audyssey XT32 në marrësin Onkyo. Dallimi është se ne mund të modifikojmë kurbën e synuar në kohë reale dhe të marrim rezultatin menjëherë.
Mund të përdorni opsionin Korrigjimi i basit me rreze të plotë për të niveluar frekuencat më të ulëta, për të zgjedhur një nga kthesat e paracaktuara dhe për të modifikuar deri në 4 kthesa të personalizuara. Në rastin tonë, kur përdornim një mikrofon matës me kalibrim IK000008 në vend të IK000002, duhej të ndryshonim kurbën në rajonin HF:
Pas korrigjimit në të dy kanalet në dalje marrim dy përgjigje të frekuencës së sheshtë:
Kurba e gjelbër - përgjigja e frekuencës së altoparlantit të majtë me ARC2 të ndezur, blu - altoparlanti djathtas me ARC2 të ndezur
Nëse krahasoni grafikët e përgjigjes së frekuencës në daljen e para-përforcuesit nga marrësi Onkyo me modalitetin "Cinema" të cilësimit Audyssey të aktivizuar dhe nga dalja e kartës së zërit kur ARC2 është në punë, do të vini re se ato janë pothuajse plotësisht. identike dhe ndryshojnë vetëm nga një zhvendosje e lehtë e mikrofonit gjatë matjes:
Kurba e kuqe është përgjigja e frekuencës së altoparlantit të majtë kur ARC2 është i ndezur, kurba blu është altoparlanti i majtë kur Audyssey XT32 funksionon në marrësin Onkyo
Paketa softuerike ARC2 mund të konsiderohet si një lloj barazuesi specifik, ku përdoruesi vendos jo kurbën e modifikimit, por menjëherë kurbën e kërkuar të përgjigjes së frekuencës në pikën e dëgjimit dhe sistemi gjeneron filtrin e nevojshëm për të siguruar vlerën e specifikuar bazuar në paraprakisht. të dhënat e matjes nga mikrofoni në zonën e kërkuar të dëgjimit.
Krahasimi përfundimtar i sistemeve të barazimit të harduerit
Dëshiroj t'ju paralajmëroj menjëherë se testimi i marrësve është kryer në kohë të ndryshme Prandaj, është e nevojshme të krahasohen grafikët e marrësve të ndryshëm me të kuptuarit se mikrofoni matës mund të ishte zhvendosur pak (edhe pse ai ishte vendosur gjithmonë në mënyrë rigoroze sipas vizores dhe ishte rregulluar më tej nga matjet testuese në modalitetin Pure Direct për t'u përshtatur me përgjigja e frekuencës me matjet e mëparshme). Pozicioni i mikrofonit matës ka një ndikim më të madh në rajonet e rangut të mesëm dhe të frekuencës së lartë, ku çdo 5 mm zhvendosje mund të ndryshojë ndjeshëm figurën. Në rajonin me frekuencë të ulët, lëvizje të tilla janë praktikisht të padukshme dhe vetëm lëvizjet prej disa centimetrash janë fare kritike.
Për të demonstruar ndryshimet, ne paraqesim grafikët e përgjigjes së frekuencës së kanalit të majtë për secilin marrës pa aplikuar sisteme korrigjimi:
Kurba blu - përgjigja e frekuencës së altoparlantit të majtë të sistemit YPAO pa korrigjim, jeshile - sistemet MCACC, e kuqe - Sistemet Audyssey
Siç mund ta shohim, në diapazonin e frekuencës së ulët ndryshimet janë minimale, dhe në pjesën tjetër të diapazonit ato janë gjithashtu të parëndësishme, prandaj, duke marrë parasysh faktin e këtyre dallimeve të vogla, ne do të vazhdojmë të krahasojmë përgjigjen e frekuencës së ndryshme sistemeve.
Fatkeqësisht, asnjë nga marrësit e testuar në asnjë formë nuk tregon grafikët origjinalë të përgjigjes së matur të frekuencës (të paktën në një formë të thjeshtuar me zbutjen 1/6 oktavë) për një vlerësim vizual të zonave problematike dhe aftësinë për të filluar zgjidhjen e pjesshme të tyre duke kërkimi i vendndodhjes optimale të altoparlantëve dhe vendeve të dëgjimit. Të gjitha të dhënat e nevojshme janë të pranishme pas matjes, dhe procesorët e përdorur dhe cilësia e daljes së imazhit në TV bëjnë të mundur shfaqjen e një grafiku të përgjigjes së frekuencës, por për ndonjë arsye asnjë nga prodhuesit nuk e bën këtë.
Le të shohim redaktimin e kanalit të majtë MCACC dhe YPAO:
Kurba blu është përgjigja e frekuencës së altoparlantit të majtë të sistemit YPAO me cilësimin "Mesatar", kurba e gjelbër është sistemi MCACC me cilësimin M2
Në zonën LF, gjithçka është shumë e ngjashme, pasi redaktimi i të dy sistemeve është minimal, por grafiku YPAO duket pak më i mirë për shkak të tërheqjes së disa prej uljeve. Në frekuencat nën 40 Hz, sistemi YPAO përpiqet të zgjasë përgjigjen e frekuencës për shkak të një rritjeje shtesë, e cila duket mjaft e bukur, dhe në vëllime të ulëta madje është e këndshme për veshin, por nuk rekomandohet të luash muzikë me vëllime të larta me një modifikim të tillë. për shkak të mbingarkesës së mundshme të pjesës së amplifikatorit dhe shtrembërimit nga vuferi.
Grafiku i përgjigjes së frekuencës së kanalit të majtë të sistemeve Audyssey dhe YPAO:
Kurba blu është përgjigja e frekuencës së altoparlantit të majtë të sistemit YPAO me cilësimin "Mesatar", e kuqja është sistemi Audyssey me cilësimin "Kinema".
Redaktimi i rajonit me frekuencë të ulët nga sistemi Audyssey është më i saktë dhe grafiku i përgjigjes së frekuencës është më linear për shkak të prerjes së majave dhe shtrirjes së uljeve. Ashtu si YPAO, sistemi Audyssey përpiqet të tërheqë përgjigjen e frekuencës nën 40 Hz duke përforcuar sinjalin. Në frekuencat rreth 6 kHz, Audyssey shfaq një ngritje që në mënyrë të dëgjueshme ndjehet si një tingull më "i hapur". Përndryshe, grafikët janë shumë të ngjashëm.
Le të kalojmë në kanalin qendror, si më interesantin për të analizuar funksionimin e sistemit të korrigjimit të përgjigjes së frekuencës (për shkak të pabarazisë fillimisht të madhe të përgjigjes së frekuencës së këtij kanali në sistemin në provë):
Kurba e kuqe - përgjigja e frekuencës së kanalit qendror të sistemit Audyssey, jeshile - sistemet YPAO në modalitetin "Natyror", blu - sistemet MCACC në modalitetin M2
Grafikët pas sistemeve MCACC dhe YPAO kanë një pabarazi mjaft të madhe në brezin e frekuencës nga 100 Hz në 700 Hz, e cila perceptohet në mënyrë të dëgjueshme si një ngjyrim i zërit në lidhje me altoparlantët e përparmë. Grafiku pas Audyssey është më i barabartë dhe, siç diskutuam në përshkrimin e Audyssey MultiEQ XT32, praktikisht përkon me përgjigjen e frekuencës së kanaleve të përparme.
Sidoqoftë, për YPAO, korrigjimi manual u bë duke përdorur një barazues parametrik, dhe tani ndryshimi i tyre me Audyssey është shumë i parëndësishëm dhe shfaqet vetëm në rangun nga 100 në 180 Hz:
Kurba e kuqe - përgjigja e frekuencës së kanalit qendror të sistemit Audyssey, jeshile - sistemet YPAO me modifikim manual të barazuesit
Tjetra, le të krahasojmë disa altoparlantë që tingëllojnë njëkohësisht për të vlerësuar se sa i saktë doli të ishte redaktimi për riprodhimin e një sinjali jo nga një altoparlant, por nga disa menjëherë - ky është çdo sinjal monofonik, një zë ose një instrument i vendosur në qendër.
Përgjigja e frekuencës në modalitetin trifonik (para + nën me ndërprerje në 80 Hz) të sistemeve MCACC dhe YPAO:
Kurba e kuqe është përgjigja e frekuencës në modalitetin trefonik të sistemit YPAO me cilësimin "Mesatar", kurba e gjelbër është sistemi MCACC me cilësimin M2
Përgjigja e frekuencës në modalitetin trifonik pas korrigjimit nga sistemet MCACC dhe YPAO është shumë e ngjashme, veçanërisht në rajonin me frekuencë të ulët, ku të dy sistemet praktikisht nuk korrigjojnë kanalin e nënvuferit dhe më pas së bashku përsërisin të gjitha gungat dhe uljet. Rritja e HF në YPAO mund të modifikohet lehtësisht me një EQ parametrike.
Triphonic (përparëse + nën me ndërprerje në 80 Hz) Audyssey dhe MCACC:
Kurba e gjelbër është përgjigja e frekuencës në modalitetin trifonik të sistemit MCACC me cilësimin M2, kurba blu është me sistemin Audyssey XT32 me cilësimin "Kinema".
Korrigjimi i përgjigjes së frekuencës nga sistemi Audyssey XT32 është shumë i dukshëm në rajonin me frekuencë të ulët, ku ka pothuajse një "raft" në kanalin e nënvuferit, dhe më pas të gjitha gunga janë prerë dhe disa ulje janë zgjatur.
Trifonic (para + nën me ndërprerje në 80 Hz) Audyssey dhe YPAO:
Kurba e kuqe është përgjigja e frekuencës në modalitetin trefonik të sistemit YPAO me cilësimin "Mesatar", blu - sistemi Audyssey XT32 me cilësimin "Kinema".
Përsëri, shohim punë të shkëlqyera nga Audyssey në kanalin e nënvuferit dhe në pjesën tjetër të gamës së frekuencës së ulët.
Një provë e vështirë është riprodhimi i njëkohshëm i sinjalit nga të gjithë altoparlantët - para, qendra, pasme dhe subwoofer. Në këtë rast, të gjithë parametrat janë të rëndësishëm: redaktimi i përgjigjes së frekuencës së secilit kanal, distanca e konfiguruar saktë nga altoparlantët, nivelet e fitimit për çdo sinjal, përputhja e fazave. Kur luani sinjalin e provës njëkohësisht në të gjithë altoparlantët, ndryshimi në përgjigjen përfundimtare të frekuencës doli të ishte mjaft domethënës:
Kurba e kuqe - përgjigja e frekuencës së funksionimit të njëkohshëm të të gjitha 5.1 kanaleve të sistemit YPAO me cilësimin "Mesatar", blu - sistemi Audyssey XT32 me cilësimin "Cinema", jeshile - sistemi MCACC me vendosjen M2
Grafikët e sistemeve MCACC dhe YPAO praktikisht përkojnë në intervalin e frekuencës nga 100 Hz në 800 Hz, pastaj deri në 3 kHz në YPAO ka një rënie të lehtë - me sa duket për shkak të faktit se kanalet e pasme korrigjohen vetëm minimalisht. Në fushën e funksionimit të nën-vuferit, ndryshimi është rreth 7 dB, gjë që është ende e vështirë të shpjegohet. Ndoshta ndryshimi është për shkak të gabimeve në matje, ose disa kanale janë vendosur në Large për sistemin MCACC (pa prerë në subwoofer), ose ndoshta sistemet trajtojnë zbërthimin e një sinjali stereo në 5 kanale njëkohësisht në mënyra të ndryshme.
Grafiku i përgjigjes së frekuencës së sistemit Audyssey dallohet nga një "raft" i sheshtë në diapazonin e funksionimit të nënvuferit, por më pas ka një rënie prej rreth 7 dB dhe më pas një përgjigje pak a shumë e drejtë frekuence me ulje në frekuencat 197 dhe 356 Hz. , por pa një rritje të konsiderueshme në një frekuencë prej 165 Hz, si në sistemet e tjera, gjë që ka shumë të ngjarë për shkak të karakteristikave të kanalit qendror. Rrotullimi në rajonin 2 kHz është një veçori e modalitetit "Kinema" dhe praktikisht mungon në modalitetin "Muzikë".
Rezultatet
- Audyssey MultiEQ XT 32 për grafikët më të qetë të përgjigjes së frekuencës së të gjitha kanaleve, duke përfshirë nënvuferin
- YPAO RSC për punë e mirë Filtër kompleks RSC për korrigjimin e problemeve në rajonin me frekuencë të ulët
- MCACC për prezantim të qartë të informacionit rreth ndryshimeve të bëra
- YPAO për punë në të gjithë diapazonin e frekuencave
- Audyssey 2EQ për rregullimin e përgjigjes së frekuencës së altoparlantëve të ndryshëm në rangun HF
- YPAO (të gjitha) për EQ parametrike fleksibël për kanal
- MCACC për EQ grafike me 9 breza dhe EQ me valë të qëndrueshme me 3 breza
- Audyssey (të gjitha) për barazuesin grafik, duke përfshirë barazuesin e kanalit të nënvuferit (zbatimi i Onkyo)
- Audyssey MultiEQ XT 32 dhe YPAO RSC. Është e vështirë të zgjedhësh pa mëdyshje një udhëheqës, sepse një sistem korrigjon në mënyrë të përsosur përgjigjen e frekuencës në të gjithë gamën, ndërsa i dyti, megjithëse korrigjon më keq përgjigjen e frekuencës, ka aftësinë të modifikojë gjithashtu rezultatin e marrë duke përdorur një barazues parametrik për t'iu përshtatur personalit. preferencat.
- MCACC. Një gamë e mirë mundësish kufizohet vetëm nga mjetet e redaktimit të përdorura.
- YPAO. Sintonizimi automatik rregullon vetëm pak përgjigjen e frekuencës së kanaleve, gjë që kërkon ndryshime të detyrueshme në cilësimet parametrike të barazimit për të marrë një rezultat të pranueshëm.
- Audyssey 2EQ. Mungesa e redaktimit nën 1 kHz nuk lejon korrigjimin e efekteve të dhomës.
Kur përdorni një kompjuter si burim dhe dëgjoni vetëm regjistrime stereo opsioni më i mirë Audyssey MultiEQ XT32 do të përdoret në programin ARC2, pasi kjo zgjidhje kombinon dy veçori njëherësh: funksionimin e shkëlqyer të makinës dhe aftësinë për të modifikuar manualisht.
Audyssey 2EQ
Të mirat: sistemi bazë i kalibrimit për parametrat bazë.
Disavantazhet: mungesa e ndonjë korrigjimi në rajonin nën 1 kHz, i cili nuk lejon korrigjimin e problemeve që lidhen me karakteristikat e dhomës.
Audyssey MultiEQ XT32 (në marrës)
Të mirat: sistemi më i fuqishëm për barazimin e përgjigjes së frekuencës së të gjitha kanaleve në gamën e plotë (si për karakteristikat e dhomës ashtu edhe për altoparlantët e ndryshëm, duke përfshirë pjesën e pasme dhe subwoofer), thjeshtësi për përdoruesin përfundimtar.
Disavantazhet: pamundësia e redaktimit të rezultatit të korrigjimit, nuk ka asnjë mënyrë për të vendosur parametrat para fillimit të matjeve, nuk ka asnjë mënyrë për të ruajtur disa rezultate korrigjimi, përgjigja e frekuencës shtrihet jashtë gamës së funksionimit të altoparlantëve.
Audyssey MultiEQ XT32 (përfshirë me softuerin ARC2)
Të mirat: sistemi më i fuqishëm për nivelimin e përgjigjes së frekuencës së të gjitha kanaleve në gamën e plotë për t'iu përshtatur karakteristikave të dhomës, aftësia për të modifikuar manualisht kurbën e synuar.
Disavantazhet: kërkon një kompjuter si burim, që përpunon vetëm daljen stereo, vështirësi në vendosjen e një rruge kalimi për të nxjerrë të gjithë tingujt nga kompjuteri.
MCACC i avancuar
Të mirat: aftësia për të redaktuar një barazues të konfiguruar automatikisht, disa qeliza memorie për cilësime të ndryshme dhe rezultate të matjes, një paraqitje vizuale e informacionit në lidhje me ndryshimet e bëra, saktësinë e vendosjes së frekuencës qendrore të barazuesit parametrik të filtrit të valëve në këmbë (duke filluar nga 63 Hz ).
Disavantazhet: nuk ka barazues për nën-vuferin, vendosja e filtrit të valëve në këmbë vetëm nga 63 Hz, rezultati më i keq i korrigjimit të përgjigjes së frekuencës në rajonin me frekuencë të ulët, një frekuencë kryqëzimi nën-vuferi për të gjitha kanalet.
YPAO (i rregullt)
Të mirat: aftësia për të redaktuar rezultatin duke përdorur cilësimet parametrike të barazimit.
Disavantazhet: pamundësia për të rregulluar me saktësi përgjigjen e frekuencës së nënvuferit, kërkohet njëfarë aftësie për të rregulluar përgjigjen e frekuencës duke përdorur rregullime manuale në frekuencat qendrore të barazimit parametrik;
YPAO RSC
Të mirat: duke kombinuar një filtër kompleks RSC për të korrigjuar problemet në zonat e ulëta dhe të mesme me aftësinë për të korrigjuar rezultatin duke përdorur cilësimet parametrike të barazimit.
Disavantazhet: pamundësia për të rregulluar mirë përgjigjen e frekuencës së nënvuferit, modifikimi i pandërprerë i filtrit RSC në modalitetin e barazimit manual, mungesa e një filtri RSC për kanalet e pasme dhe nënvuferin, kërkohet një farë kualifikimi i përdoruesit për të rregulluar përgjigjen e frekuencës duke përdorur redaktimi manual i barazuesit, hap i madh i frekuencave qendrore të barazuesit parametrik dhe maksimumi 7 breza për çdo kanal.
Një aplikacion Java i krijuar për të analizuar parametrat akustikë të një dhome dhe për të marrë të dhënat e nevojshme për të korrigjuar karakteristikat e frekuencës.
Përcaktimi i varësisë së funksionimit të sistemeve të zërit nga karakteristikat e ambienteve është një nga elementet thelbësore në procesin e arritjes së zërit me cilësi të lartë. Është e mundur të heqësh qafe rezonancat e dhomës vetëm duke i "shtrënguar" ato duke përdorur një rregullator të përgjigjes së frekuencës ose amortizues akustikë të paneleve.
Megjithatë, për të identifikuar problemet që lindin gjatë luajtjes së audios në dhoma të papërgatitura akustike, është e nevojshme të përdoren programe të specializuara si Room EQ Wizard (shkurt REW) të kombinuara me një mikrofon matës dhe një parapërforcues.
Gjatë riprodhimit të një skedari audio me një ton sinusoidal vazhdimisht në rritje, sinjali regjistrohet nga një pajisje matës - çdo mikrofon gjithëdrejtues me një karakteristikë të njohur të amplitudës-frekuencës. Gjatë tingullit të skedarit të fshirjes, është e nevojshme të përjashtohen tingujt e huaj dhe përveç kësaj, nuk duhet të jeni pranë marrësit. Rezultati që rezulton përpunohet duke marrë parasysh korrigjimet për kartën e zërit dhe mikrofonin e përdorur dhe rikrijohet në dritaren grafike të programit Room EQ Wizard. Pasi të krijohet përgjigja e impulsit të dhomës, mbetet vetëm rregullimi i barazimit dhe paketa përfshin një opsion akordimi korrigjues automatik.
Programi Room EQ Wizard përfshin një sërë mjetesh për krijimin e të gjitha llojeve të sinjaleve të testimit, matjen e përgjigjeve dhe frekuencave të impulseve dhe përcaktimin e impedancave audio. Aplikacioni llogarit parametrat e reverberimit, përcakton frekuencat dhe faktorët e cilësisë së rezonancave të dhomës. Bazuar në rezultatet e matjes, Room EQ Wizard ndërton grafikë (përgjigjia e frekuencës së fazës, përgjigja e amplitudës-frekuencës, koha e vonesës së grupit, kalimtarët) dhe spektrogramet (Ujëvara, Përgjigjja e Impulseve, RTA, ETC, GD, RT60 dhe të tjerë). Grafikët vizatohen në kohë reale, programi llogarit momentet e reflektimeve të zërit, parametrat Thiel-Small dhe ka një funksion të zbulimit automatik për majat. Fushat e grafikut mund të shkallëzohen dhe zhvendosen, dhe shiritat e lëvizjes mund të aktivizohen.
Rezultatet mund të ruhen si skedarë grafikë, aplikacioni eksporton të dhënat e reverberimit që rezultojnë në një skedar *.wav për përdorim në reverbs impulse, dhe përveç kësaj mund të krijojë filtra të veçantë për to që neutralizojnë shtrembërimet e paraqitura nga dhoma.
Një nga disavantazhet është nevoja për kalibrimin fillestar të njehsorit të presionit të zërit SPL i përfshirë në këtë softuer për saktësinë e vlerave absolute të rezultateve të marra. Nga programe profesionale Ky lloj i Room EQ Wizard dallohet nga mungesa e aftësive për vlerësimin e kuptueshmërisë së të folurit të indekseve STI ose RASTI, të cilat janë të nevojshme kur analizohen mjediset akustike të dhomave të mëdha.
Softueri Room EQ Wizard u zhvillua nga entuziastë nga Home Theater Shack, një forum i themeluar në prill 2006 për të diskutuar tema të ndryshme që lidhen me projektimin, ndërtimin dhe konfigurimin e teatrit në shtëpi, pajisjeve audio dhe video me definicion të lartë. Për më tepër, ky burim është një qendër e madhe në internet me pakicë elektronikë të konsumit.
Programi është falas dhe shpërndahet lirisht në internet, përveç kësaj, ai përmirësohet dhe përditësohet vazhdimisht. Ju mund ta shkarkoni shpërndarjen vetëm pasi të regjistroheni në forum. Përveç vetë paketës së softuerit, shpërndarja përfshin skedarë kalibrimi për pajisjet matëse (sigurohet gjithashtu një funksion për krijimin e pavarur të skedarëve të kalibrimit). Programi ka udhëzime shumë të detajuara (në anglisht) në formate PDF dhe html.
Për të ekzekutuar paketën e softuerit, duhet të keni aplikacionin Java Runtime Environment dhe që ai të funksionojë siç duhet, duhet të keni një matës të jashtëm të nivelit të zërit që ju lejon të konfiguroni matësin e brendshëm SPL.
Gjuha e ndërfaqes së programit Room EQ Wizard është anglishtja. Nuk ka asnjë Russifier ose manual në gjuhën ruse në internet.
Ky aplikacion është me shumë platforma (Linux, Win, Mac). REW është testuar nën Windows XP, Vista, 7 dhe 8. Madhësia minimale RAM - 512 MB.
Shpërndarja e programit: falas.
Një aplikacion Java i krijuar për të analizuar parametrat akustikë të një dhome dhe për të marrë të dhënat e nevojshme për të korrigjuar karakteristikat e frekuencës.
Përcaktimi i varësisë së funksionimit të sistemeve të zërit nga karakteristikat e ambienteve është një nga elementët më të rëndësishëm në procesin e arritjes së zërit me cilësi të lartë. Është e mundur të heqësh qafe rezonancat e dhomës vetëm duke "shtypur" ato duke përdorur një rregullator të përgjigjes së frekuencës ose amortizues akustikë të panelit. Megjithatë, për të identifikuar problemet që lindin gjatë luajtjes së audios në dhoma të papërgatitura akustike, është e nevojshme të përdoren programe të specializuara si Room EQ Wizard (shkurt REW) të kombinuara me një mikrofon matës dhe një parapërforcues.
Gjatë riprodhimit të një skedari audio me një ton sinusoidal vazhdimisht në rritje, sinjali regjistrohet nga një pajisje matës - çdo mikrofon gjithëdrejtues me një karakteristikë të njohur të amplitudës-frekuencës. Gjatë tingullit të skedarit të fshirjes, është e nevojshme të përjashtohen tingujt e huaj dhe përveç kësaj, nuk duhet të jeni pranë marrësit. Rezultati që rezulton përpunohet duke marrë parasysh korrigjimet për kartën e zërit dhe mikrofonin e përdorur dhe rikrijohet në dritaren grafike të programit Room EQ Wizard. Pasi të krijohet përgjigja e impulsit të dhomës, mbetet vetëm rregullimi i barazimit dhe paketa përfshin një opsion akordimi korrigjues automatik.
Programi Room EQ Wizard përfshin një sërë mjetesh për krijimin e të gjitha llojeve të sinjaleve të testimit, matjen e përgjigjeve dhe frekuencave të impulseve dhe përcaktimin e impedancave audio. Aplikacioni llogarit parametrat e reverberimit, përcakton frekuencat dhe faktorët e cilësisë së rezonancave të dhomës. Bazuar në rezultatet e matjes, Room EQ Wizard ndërton grafikë (përgjigjia e frekuencës së fazës, përgjigja e amplitudës-frekuencës, koha e vonesës së grupit, kalimtarët) dhe spektrogramet (Ujëvara, Përgjigjja e Impulseve, RTA, ETC, GD, RT60 dhe të tjerë). Grafikët vizatohen në kohë reale, programi llogarit momentet e reflektimeve të zërit, parametrat Thiel-Small dhe ka një funksion të zbulimit automatik për majat. Fushat e grafikut mund të shkallëzohen dhe zhvendosen, dhe shiritat e lëvizjes mund të aktivizohen.
Rezultatet mund të ruhen si skedarë grafikë, aplikacioni eksporton të dhënat e reverberimit që rezultojnë në një skedar *.wav për përdorim në reverbs impulse, dhe përveç kësaj mund të krijojë filtra të veçantë për to që neutralizojnë shtrembërimet e paraqitura nga dhoma.
Një nga disavantazhet është nevoja për kalibrimin fillestar të njehsorit të presionit të zërit SPL i përfshirë në këtë softuer për saktësinë e vlerave absolute të rezultateve të marra. Room EQ Wizard ndryshon nga programet profesionale të këtij lloji në atë që i mungon aftësia për të vlerësuar kuptueshmërinë e të folurit të indekseve STI ose RASTI, të cilat janë të nevojshme kur analizohen mjediset akustike të dhomave të mëdha.
Softueri Room EQ Wizard u zhvillua nga entuziastë nga Home Theater Shack, një forum i themeluar në prill 2006 për të diskutuar tema të ndryshme që lidhen me projektimin, ndërtimin dhe konfigurimin e teatrit në shtëpi, pajisjeve audio dhe video me definicion të lartë. Për më tepër, ky burim është një qendër e madhe e shitjes me pakicë në internet për elektronikën e konsumit.
Programi është falas dhe shpërndahet lirisht në internet, përveç kësaj, ai përmirësohet dhe përditësohet vazhdimisht. Ju mund ta shkarkoni shpërndarjen vetëm pasi të regjistroheni në forum.
Për të ekzekutuar paketën e softuerit, duhet të keni aplikacionin Java Runtime Environment dhe që ai të funksionojë siç duhet, duhet të keni një matës të jashtëm të nivelit të zërit që ju lejon të konfiguroni matësin e brendshëm SPL.
Gjuha e ndërfaqes së programit Room EQ Wizard është anglishtja. Nuk ka asnjë Russifier ose manual në gjuhën ruse në internet.
Përveç vetë paketës së softuerit, shpërndarja përfshin skedarë kalibrimi për pajisjet matëse (sigurohet gjithashtu një funksion për krijimin e pavarur të skedarëve të kalibrimit). Programi ka udhëzime shumë të detajuara (në anglisht) në formate PDF dhe html.
Shpërndarja e programit: falas.
Unë besoj se në këtë seksion do të ishte e përshtatshme të krijohej një temë e veçantë kushtuar Room EQ Wizard, shumë njerëz e përdorin këtë program për të kontrolluar akustikën e dhomave.
Room EQ Wizard (REW) është një program Java pa pagesë me shumë platforma (Win, Mac, Linux) i krijuar për të matur parametrat akustikë të dhomave. Përdoret, para së gjithash, për të identifikuar problemet që lindin kur luani audio në dhoma të papërgatitura akustike. Room EQ Wizard ju lejon të ndërtoni grafikët e frekuencës së amplitudës dhe fazës, të vlerësoni vetitë e reverberimit të dhomës, të krijoni një përgjigje impulse të dhomës dhe të vendosni një barazues që korrigjon përgjigjen e frekuencës.
Programi funksionon si më poshtë: luhet një skedar fshirje (një skedar audio me një ton sinusoidal vazhdimisht në rritje), sinjali regjistrohet nga një mikrofon matës, rezultati i llogaritur rregullohet në përputhje me korrigjimet për një kartë zanore dhe mikrofon të caktuar dhe shfaqet nga ndërfaqja grafike e programit.
Në mënyrë që vlerat absolute të rezultateve të marra të jenë të sakta, është e nevojshme të kalibroni nivelin e presionit të zërit (SPL), i cili kryhet duke përdorur një matës të nivelit të presionit të zërit (SPL Meter), megjithatë, përgjigja e frekuencës mund të jetë vlerësuar pa të. Si mikrofon matës, mund të përdorni matësin SPL, një mikrofon të veçantë ose çdo mikrofon gjithëdrejtues me një përgjigje frekuence të njohur (më shumë se si të krijoni një skedar kalibrimi për një mikrofon më poshtë).
1. Metër SPL.
Spoiler
Pra, nëse keni nevojë për lexime të sakta të nivelit të presionit të zërit, do t'ju duhet një matës SPL. Për të kalibruar nivelin e SPL, do të mjaftojë një matës i lirë Radio Shack me një shkallë analoge ose dixhitale. Nëse planifikoni ta përdorni për matje akustike, duhet të keni parasysh se mbi 1 kHz përgjigja e frekuencës së kësaj pajisjeje është e pakënaqshme (shih). Galaxy CM-140 më i shtrenjtë ofron saktësi të mjaftueshme dhe mund të përdoret gjithashtu si mikrofon matës. Skedarët e kalibrimit për Radio Shack dhe Galaxy CM-140 mund të shkarkohen.
2. Mikrofoni.
Spoiler
Nëse nuk po planifikoni të përdorni matësin SPL për të punuar me fshirje, ne mund të rekomandojmë Behringer ECM8000 të lirë si një mikrofon matës që mund të shkarkohet skedari standard i kalibrimit; Mund të përdorni një mikrofon tjetër, mundësisht një që është i gjithëdrejtuar; Mund të krijoni vetë një skedar kalibrimi nëse e dini përgjigjen e frekuencës së mikrofonit. Si mostër, mund të shkarkoni çdo skedar .cal, për shembull, për të njëjtin Behringer ECM8000. Ne hapim skedarin në notepad, në secilën rresht ka një palë numrash, e para është frekuenca në Hz, e dyta është korrigjimi në dB që korrespondon me grafikun e përgjigjes së frekuencës së mikrofonit. Pikat e përcaktuara në këtë mënyrë lidhen në grafikun REW të ndërtuar nga vija të drejta. Sa më i vogël të jetë hapi i frekuencës, aq më i saktë është korrigjimi, megjithatë, duke pasur parasysh se ka shumë të ngjarë që nuk do të keni një përgjigje të detajuar të frekuencës për një mikrofon specifik, mund të kufizoni veten në transferimin e përafërt të të dhënave. Ruani skedarin që rezulton me shtesën .cal
Këtu është një shembull i krijimit të një skedari kalibrimi të bërë në shtëpi për një mikrofon të caktuar:
Dritarja REW shfaq vetë skedarin e kalibrimit dhe grafikun e përgjigjes së frekuencës që merret kur hyrja-dalja e kartës qarkullon shkurt, mund të shihet se programi thjesht zbret nga rezultati grafikun .cal.
Nëse nuk keni një mikrofon gjithëdrejtues, padyshim ka kuptim të bëni disa matje nga një pikë, duke ndryshuar orientimin e mikrofonit.
Nëse kërkohet saktësi maksimale, është e nevojshme të përdorni një mikrofon matës të kalibruar individualisht nga një specialist.
3. Kalibrimi i kartës.
Spoiler
Para se të filloni matjet, do të jetë e dobishme të kalibroni kartën tuaj të zërit. Për ta bërë këtë, hapni dritaren "Preferencat" nga menyja ose duke klikuar butonin përkatës. Në skedën "Soundcard", zgjidhni frekuencën e kampionimit, daljen audio dhe hyrjen audio që do të përdoren për matje dhe kanalin (si parazgjedhje, Room EQ Wizard përdor atë të duhurin). Ne lidhim daljen dhe hyrjen e zgjedhur me një kabllo audio. Klikoni butonin "Kalibroni", nën dritaren e këshillave kliko "Next" dy herë, pas së cilës programi duhet të fillojë të luajë një sinjal për të rregulluar nivelet. Niveli i sinjalit të daljes duhet të jetë brenda -12dB - -6dB (mund të ndryshohet në dritaren "Sweep Level"), sinjali i hyrjes nuk duhet të ndryshojë prej tij, në mënyrë ideale, me më shumë se 6 dB, treguesi i pikut (vija e kuqe) duhet nuk duhet të rritet mbi -1dB.
Nëse plotësohen këto kërkesa, klikoni "Next" dy herë të tjera, një fshirje kalon nëpër hartë dhe rezultatet shfaqen në dritaren kryesore. Këtu, për shembull, është përgjigja e frekuencës së matjes për kartën M-Audio FW-410:
Në dritaren "Preferencat", klikoni butonin "Make Cal" dhe ruani rezultatin. Skedari i krijuar ngarkohet automatikisht në fushën "File".
Tani le të kontrollojmë kalibrimin - në "Preferencat" në skedën "Mic/Meter", zgjidhni kutinë "C Weighted SPL Meter", nëse ka një të tillë, nuk duhet të ketë skedarë të ngarkuar kalibrimi në fushën "File"; Në dritaren kryesore të programit, klikoni "Mas". Në dritaren që shfaqet, kontrolloni frekuencën përfundimtare "Freku i fundit", vlera e dëshiruar është 20000 Hz. Klikoni "Filloni matjen". Rezultati duhet të jetë diçka e tillë:
Nëse frekuenca e marrjes së mostrave ndryshon (44,1 kHz - 48 kHz), kalibrimi do të duhet të përsëritet.
Për të qenë të drejtë, duhet të theksohet se pabarazia e përgjigjes së frekuencës së ndërfaqeve moderne profesionale audio është e papërfillshme në krahasim me sasinë e pabarazisë së elementëve të tjerë të sistemit.
4. Rregullimi i volumit të riprodhimit dhe kalibrimi SPL.
Spoiler
- nëse përdoret vetëm matësi SPL
Spoiler
Modaliteti "C peshë" dhe "Slow" duhet të aktivizohen në vetë pajisjen, në "Preferencat" në skedën "Mic/Meter" duhet të kontrolloni kutinë "C Weighted SPL Meter" dhe të ngarkoni skedarin përkatës të kalibrimit. Matësi SPL duhet të vendoset në pikën ku duhet të jetë koka e dëgjuesit (kapsula lart nëse matet diapazoni i frekuencës së ulët, kapsula drejt burimit të zërit për matje me frekuencë mesatare të lartë), dalja e njehsorit duhet të lidhet me linjën në hyrje të kartës, dalja e kartës duhet të lidhet me monitorët (ose pajisje tjetër që prodhon zë). Në dritaren "Preferencat", zgjidhni "Përdorni altoparlantin kryesor për të kontrolluar/caktuar nivelet" (nëse jeni duke konfiguruar një subwoofer, lini "Përdorni nënvuferin për të kontrolluar/caktuar nivelet"), klikoni butonin "Kontrollo nivelet" dhe më pas - " Next" nën dritaren e shpejtë, pas Kjo do të fillojë të luajë një pjesë të spektrit të zhurmës rozë. Niveli i volumit duhet të korrespondojë afërsisht me 75dB në shkallën e njehsorit, ndërsa niveli i sinjalit të hyrjes nuk duhet të jetë më i ulët se -24dB dhe më i lartë se -12dB (idealisht -18dB):
- nëse përdoret matësi SPL dhe mikrofoni matës
Spoiler
Modaliteti "C peshë" dhe "Slow" në matësin e presionit të zërit duhet të jenë të ndezura. Në "Preferencat" në skedën "Mic/Meter", duhet të zgjidhni kutinë "C Weighted SPL Meter", nëse është e zgjedhur, dhe të ngarkoni skedarin e duhur të kalibrimit për mikrofonin që po përdorni. Mikrofoni matës dhe Matësi SPL duhet të vendosen në pikën ku duhet të jetë koka e dëgjuesit, mikrofoni duhet të drejtohet me kapsulën lart nëse matet diapazoni i frekuencës së ulët, me kapsulën drejt burimit të zërit - për mes të lartë matjet e frekuencës; lidhni mikrofonin me hyrjen e kartës, daljen e kartës me monitorët (ose pajisje tjetër që riprodhon zërin). Në dritaren "Preferencat", zgjidhni "Përdorni altoparlantin kryesor për të kontrolluar/caktuar nivelet" (nëse jeni duke konfiguruar një subwoofer, lini "Përdorni nënvuferin për të kontrolluar/caktuar nivelet"), klikoni butonin "Kontrollo nivelet" dhe më pas - " Next" nën dritaren e shpejtë, pas Kjo do të fillojë të luajë një pjesë të spektrit të zhurmës rozë. Niveli i volumit duhet të korrespondojë afërsisht me 75dB në shkallën e njehsorit, ndërsa niveli i sinjalit që vjen nga mikrofoni nuk duhet të jetë më i ulët se -24dB dhe më i lartë se -12dB (idealisht -18dB):
Pas vendosjes së niveleve, klikoni "Finish" në dritaren "Preferences" dhe hapni dritaren "SPL Meter" me butonin përkatës.
Në dritaren që shfaqet, klikoni "Kalibroni", në menynë që hapet zgjidhni "Përdor sinjalin kalorik të altoparlantit REW" (ose "Përdor sinjalin kalorik të nënvuferit REW" për një nënvufer), më pas fut numrin nga ekrani i njehsorit në " Dritarja "Kalibrimi i leximit të SPL" dhe klikoni "Përfundoi".
- nëse përdoret vetëm një mikrofon matës
Spoiler
Në "Preferencat" në skedën "Mic/Meter", duhet të zgjidhni kutinë "C Weighted SPL Meter", nëse është e zgjedhur, dhe të ngarkoni skedarin e duhur të kalibrimit për mikrofonin që po përdorni. Mikrofoni matës duhet të vendoset në pikën ku duhet të jetë koka e dëgjuesit, mikrofoni duhet të drejtohet me kapsulën lart nëse matet diapazoni i frekuencës së ulët, me kapsulën drejt burimit të zërit - për matje me frekuencë mesatare të lartë; lidhni mikrofonin me hyrjen e kartës, daljen e kartës me monitorët (ose pajisje tjetër që riprodhon zërin). Në dritaren "Preferencat", zgjidhni "Përdorni altoparlantin kryesor për të kontrolluar/caktuar nivelet" (nëse jeni duke konfiguruar një subwoofer, lini "Përdorni nënvuferin për të kontrolluar/caktuar nivelet"), klikoni butonin "Kontrollo nivelet" dhe më pas - " Next" nën dritaren e shpejtë, pas Kjo do të fillojë të luajë një pjesë të spektrit të zhurmës rozë. Niveli i volumit duhet të jetë afërsisht 75dB, por meqenëse matjet kërkojnë matësin SPL që mungon, ne ndjekim këtë rekomandim - vendosni një "nivel të rehatshëm të volumit" për sistemin e riprodhimit të zërit. Niveli i sinjalit që vjen nga mikrofoni nuk duhet të jetë më i ulët se -24dB dhe më i lartë se -12dB (idealisht -18dB).
REW (Room EQ Wizard) është një aplikacion Java për matjen e përgjigjes së dhomave, si dhe për vlerësimin e rezonancave modale të një dhome. Programi përfshin mjete për gjenerimin e sinjaleve të testimit, matjen e presionit të zërit (SPL), matjen e karakteristikave të frekuencës dhe impulsit, gjenerimin e grafikëve të vonesave të fazës dhe grupit, karakteristikat spektrale, duke përfshirë përgjigjen e frekuencës kohore (ujëvara); analiza në kohë reale (RTA); llogaritja e kohës së reverberimit; gjenerimi automatik i paracaktimit të barazuesit parametrik për korrigjim arbitrar të karakteristikave të frekuencës së dhomës.
REW përdor një valë sinusi me një frekuencë logaritmike në rritje për analizë. Kjo metodë është shumë më e shpejtë dhe më e saktë se matjet manuale, është më pak e ndjeshme ndaj prerjes, ndikimit të jolinearitetit të elementeve dhe në të njëjtën kohë ka aftësinë për të marrë përgjigjen e impulsit të dhomës, si dhe karakteristika të tjera në bazë të saj. analiza. Kur përdoret me një analizues në kohë reale, REW lejon gjenerimin e sekuencave periodike të zhurmës rozë - për monitorim të përmirësuar në frekuenca të ulëta, krahasuar me përdorimin e zhurmës rozë të rastësishme, pa pasur nevojë për mesataren e kohës.
Programi mbështet normat e kampionimit nga 44.1 në 192 kHz (nëpërmjet ASIO).
Gjuha - anglisht
[SHKARKO] (30,71 MB)
Informacion nga sponsori
PCPRO100.info: konfigurimi dhe optimizimi i kompjuterit tuaj. Çfarë duhet të bëni nëse nuk ka zë - http://pcpro100.info/net-zvuka-na-kompyutere/ zbuloni në PCPRO100.info. Ndihmoni përdoruesit fillestar me cilësimet e zërit.
Room EQ Wizard është një gamë e gjerë mjetesh për analizimin e karakteristikave akustike të një dhome - reagimi i frekuencës, reagimi i impulsit, etj. Këtu mund ta shkarkoni gjithmonë versionin më të fundit.