Primeri i brendshëm Osnovit INTECONT LP 50 përdoret për të hequr pluhurin dhe për t'u dhënë forcë sipërfaqeve të suvatuara më parë, bazamenteve të gipsit, pllakave me fibra gipsi, pllakave të gipsit, bazave të çimentos dhe betonit. Abetarja përgatit sipërfaqen për aplikimin e mëvonshëm të materialeve përfundimtare - suva, stuko, materialet e bojës dhe llakut, dysheme vetëniveluese, ngjitës pllakash.
Çmimi, fshij./copë | Çmimi me shumicë |
402.00 | Thirrni! |
Shtoni në shportë
U gjet LP 53 "DIPCONT" primer me depërtim të thellë (10 l)
Toka Osnovit DIPCONT LP 53 ka një gamë të gjerë aplikimesh. Ky lloj primeri aplikohet gjatë punime fasade, para suvatimit, stukoit të sipërfaqes, para vendosjes së një dyshemeje vetëniveluese. Çmimi i abetares T-53 në dyqanin tonë do t'ju befasojë këndshëm!
Çmimi, fshij./copë | Çmimi me shumicë |
626.00 | Thirrni! |
Shtoni në shportë
U gjet LP 55 "BETTOKONT" Tokë kontakti betoni (20 kg)
Toka Osnovit BETTOKONT LP 55 është një dispersion ujor që përbëhet nga kopolimer stiren-akrilik, mbushës dhe aditivë të veçantë modifikues që përmirësojnë cilësinë e materialit ndërtimor. Primeri T-55 nuk përmban përbërës të dëmshëm. Toka Osnovit BETTOKONT ka kaluar të gjitha testet e nevojshme dhe përputhet me higjienën dhe standardet sanitare RF.
Çmimi, fshij./copë | Çmimi me shumicë |
1 540.00 | Thirrni! |
Shtoni në shportë
Weber Vetonit MD 16 Dispersion akrilik (10 l)
Abetare për përgatitjen paraprake të nënshtresave përpara aplikimit të niveluesve të dyshemesë, dyshemeve vetëniveluese, suvave dhe stukove: përmirëson forcën ngjitëse në bazë përpara se të vendosni nivelues dhe dysheme vetëniveluese, parandalon formimin e flluskave të ajrit në niveluesin e sapo shtruar, parandalon gjithashtu thithja e shpejtë e ujit nga niveluesi dhe dyshemeja vetëniveluese në bazë.
Me parapagim
Shtoni në shportëOscar Primer per punime te brendshme 10 l
Abetare "OSCAR" projektuar për forcimin e besueshëm të nënshtresave të ndryshme minerale dhe nivelimin e sipërfaqeve absorbuese shumë ose të pabarabarta, të tilla si suva, fletët e gipsit e kështu me radhë. Formula speciale e primerit OSCAR e lejon atë të depërtojë shpejt dhe thellë në sipërfaqe.
Shtoni në shportë
Primer akrilik me depërtim të thellë Ekorum (10 l)
Pa ngjyrë. Depërton thellë në sipërfaqe, forcon nënshtresat poroze, që shkumësohen dhe shkumësohen dobët. Përmirëson ngjitjen, zvogëlon konsumin e bojës, barazon thithjen e bazës, lejon që sipërfaqja e pasme të "marrë frymë", nuk përmban tretës, ka veti të forta antibakteriale dhe parandalon shfaqjen e formacioneve mykotike.
Shtoni në shportë
Primer universal Knauf “Tiefengrund” (10 l)
Deep Primer Tiefengrund është një primer që thahet shpejt, i pangjyrë, transparent, pa tretës, i gatshëm për përdorim për para-trajtimin e nënshtresës në mënyrë që të përmirësojë ngjitjen (ngjitjen e veshjes me nënshtresën) dhe të forcojë sipërfaqen gjatë instalimit. pllaka qeramike, lyerje, letër-muri dhe stuko
Çmimi, fshij./copë | Çmimi me shumicë, fshij./copë |
756.19 | 736.46 |
NË ndërtim modern betoni është materiali më i zakonshëm. Falë teknologjive inovative, ne prodhojmë Llojet e ndryshme beton, të cilat janë të përshtatshme për përdorim të jashtëm dhe të brendshëm. Në këtë rast, sipërfaqet kërkojnë përpunim shtesë. Për këtë përdoren abetare depërtim i thellë për beton, të cilat janë projektuar për të kryer funksione të shumta.
Kur kryeni çdo lloj punë riparimi priming është faza e detyrueshme, pa të cilën nuk mund të bëni. Cili astar është i përshtatshëm vendoset në secilin rast specifik, duke marrë parasysh karakteristikat e sipërfaqes që trajtohet.
Karakteristikat e betonit
Betoni sot është një material ndërtimi universal që është shumë i popullarizuar. Falë karakteristikave të materialit dhe teknologjisë për ndërtimin e objekteve, është e mundur të realizohen idetë dhe truket e projektimit nga më të ndryshmet dhe të guximshme.
Karakteristika kryesore e betonit është kostoja e tij e përballueshme, e cila është e ulët në krahasim me të tjerët Materiale ndërtimi. Duhet të theksohet se betoni është i sigurt nga pikëpamja mjedisore.
Shtrirja e aplikimit të betonit është mjaft e gjerë. Me ndihmën e tij, është e mundur jo vetëm të rritet niveli i mekanizimit, por edhe të vendoset automatizimi i proceseve teknologjike. Dhe kur përdorni abetare betoni për punë të jashtme, mund të krijoni çdo stil arkitektonik dhe ndërtimi.
Nevoja për abetare
Kushdo që ka kryer ndonjëherë riparime në banesën e tij e di shumë mirë se para se të vendosen muret, të lyhen ose të vendosen letër muri, ato duhet të mbulohen me një shtresë abetare (dhe ndoshta më shumë se një). E njëjta gjë duhet bërë para vendosjes së dyshemesë. Por jo të gjithë do të mendojnë pse po bëhet kjo.
Detyra kryesore që i është caktuar abetares është rritja e ngjitjes sipërfaqe betoni me materialet e mëvonshme të përfundimit. Përveç kësaj, përzierjet sigurojnë mbrojtje nga efektet e dëmshme të një numri faktorësh të jashtëm.
Materiali në gjendjen e tij tashmë të ngrirë është mjaft i qëndrueshëm. Megjithatë, nëse nuk përdoren mjete shtesë si abetare për të forcuar betonin, ai mund të shembet. Kjo mund të jetë për shkak të arsyeve mekanike. Betoni ndikohet gjithashtu nga faktorë të jashtëm natyrorë.
Qëllimi funksional
Siç e dini, betoni është një material me densitet dhe fortësi të lartë, por në të njëjtën kohë përmban mikropore. Struktura poroze ka të dyja avantazhet dhe disavantazhet e saj. Në veçanti, nëse sipërfaqja e betonit lihet ashtu siç është, atëherë aftësia e saj e theksuar absorbuese çon në rritjen e kostove të produkteve të bojës dhe llakut.
Një abetare me një efekt depërtimi të thellë është një përbërje e veçantë që futet në mikropore. Kjo ju lejon të forconi betonin nga brenda, dhe në të njëjtën kohë të rrisni vetitë e tij ngjitëse. Zakonisht kjo arrihet nga polimere akrilike, të cilat janë të pasura me disa lloje abetaresh me penetrim të thellë për beton. Gjatë përdorimit të tyre, së bashku me efektin forcues, ulet edhe absorbueshmëria e materialit ndërtimor.
Përzierjet e abetareve përdoren për përfundimin e jashtëm ose të brendshëm. Pas trajtimit sipërfaqësor, mund të aplikohen lloje të tjera të përfundimit:
stuko;
tjegulla;
produkte bojë dhe llak;
suva (përfshirë dekorative);
letër-muri (përfshirë lëngun).
Në këtë rast, abetarja bën të mundur aplikimin e materialeve të mëvonshme të përfundimit në një shtresë të barabartë. Bazuar në këtë, bëhet e qartë se aplikimi i komponimeve të tilla është një proces i domosdoshëm dhe i rëndësishëm.
Gama e produkteve
Në varësi të përbërjes së abetares, ato ndahen në disa lloje:
polistiren;
akrilik;
polivinil acetat;
epoksi;
alkid
Abetarja e polistirenit për beton për punë të jashtme (ose të brendshme) përdoret rrallë në jetën e përditshme, pasi është bërë me shtimin e tretësve toksikë. Prandaj, fusha e zbatimit të saj është e kufizuar kryesisht përfundimi i jashtëm fasadave ose ambientet e prodhimit, mundësisht e hapur. Disa lloje specifike të bojrave kërkojnë një primer me bazë polistireni. Përveç kësaj, përzierjet e tilla aplikohen në sipërfaqen e suvatuar para vendosjes së pllakave.
Përzierjet akrilike janë bërë të përhapura. Dhe të gjitha për faktin se ato nuk kanë një erë të fortë, kombinohen në mënyrë ideale me pothuajse çdo lloj materiali përfundimtar dhe kanë absorbueshmëri të shkëlqyeshme. Pas aplikimit të primerit, mund të filloni përfundimin e mëtejshëm pas 3-4 orësh. Për shkak të mirëdashjes mjedisore të materialit, abetare betoni për punë të brendshme mund të aplikohet në sipërfaqen e çdo ambienti, duke përfshirë dhomat e fëmijëve dhe repartet e spitalit. Për shkak të përthithjes dhe tharjes së tyre të shpejtë, përbërjet akrilike nuk rekomandohen për përdorim në fasada.
Primeri i polivinilacetatit është ideal në rastet kur është e nevojshme të kryhen shpejt riparimet. Pas aplikimit në sipërfaqe, thahet brenda 30-40 minutave. Pak para përfundimit është e nevojshme të trajtohet me zam PVA në mënyrë që të përmirësohet ngjitja. Pas kësaj, mund të filloni të vizatoni letër-muri ose të pikturoni.
Primeri epoksi është bërë nga rrëshira. Shpesh përdoret kur aplikoni mbulesa dyshemeje poliuretani. Pas aplikimit të përbërjes, vetitë rezistente ndaj konsumit të materialit rriten ndjeshëm.
Kur zgjidhni pyetjen urgjente se cili abetare me depërtim të thellë është më e mira për betonin, mund të hidhni një vështrim më të afërt në përzierjet alkide. Ato janë gjithashtu të njohura në ndërtimet moderne dhe më së shpeshti aplikohen në sipërfaqe më parë punimet e pikturës. Duke depërtuar në strukturën poroze të betonit, përbërja siguron mbrojtje të besueshme të materialit nga lagështia. Duhen 12 deri në 15 orë për t'u tharë plotësisht.
Karakteristikat e zgjedhjes
Për të bërë zgjedhja e duhur përzierje abetare, duhet të kuptoni qartë se për çfarë qëllimi do të shërbejë - për punë të jashtme apo do të jetë dekorim i brendshëm. Për përpunim sipërfaqet e jashtme Vlen të blini një përbërje të veçantë fasade që kërkon shumë kohë për t'u tharë. Në kushte të jashtme ky është një avantazh i rëndësishëm. Çdo lloj primeri i disponueshëm është i përshtatshëm për përfundimin e brendshëm.
Një tjetër pikë e rëndësishme- kjo është kostoja. Këtu është më mirë të mos kurseni, por të blini produkte të shtrenjta por të besueshme, në vend që më vonë "të korrni përfitimet" nga një produkt me cilësi të dyshimtë.
Për fat të mirë, çmimi për një abetare të mirë me depërtim të thellë nuk është gjithmonë i lartë dhe mund ta gjeni opsion i lirë. Në çdo rast, është më mirë t'i besoni një prodhuesi të mirënjohur dhe të besueshëm.
Tregu i ndërtimit mund të vërshohet me falsifikime, të cilat ekzistojnë pothuajse në çdo fushë veprimtarie; para së gjithash, duhet t'i kushtoni vëmendje paketimit, i cili ka gjithmonë mbrojtjen e duhur (etiketa holografike, ngjitëse etj.), të cilat i ka vetëm prodhuesi. .
Në mbrojtje të shëndetit
Kur blini një abetare përpara se të kryeni riparime të mëdha, duhet të zgjidhni atë që ka veti antiseptike. Për më tepër, nuk ka rëndësi se çfarë lloji është dhe për çfarë lloj pune (dekorimi i jashtëm ose i brendshëm). Falë kësaj, rreziku i mykut ose mykut në sipërfaqet e betonit eliminohet.
Kjo është veçanërisht e vërtetë kur në familje ka fëmijë të vegjël. Dhe nëse për prindërit çmimi i një abetare me depërtim të thellë nuk ka rëndësi, atëherë kur planifikoni një rinovim në dhomën e fëmijëve, thjesht nuk mund të bëni pa këtë material përfundimtar. Në fund të fundit, kërpudhat lëshojnë toksinat e saj në ajër. Si rezultat, në një dhomë të tillë nuk mund të kapni vetëm rrufë ose alergji, por edhe sëmundje më serioze. Dhe fëmijët, për shkak të trupit të tyre të brishtë, janë të parët që vuajnë.
Karakteristikat e aplikimit
Para se të aplikoni abetaren, duhet të përgatisni me kujdes sipërfaqen. Për këtë përfundimi i vjetër nëse është e mundur hiqet plotësisht. Nëse ka çarje të mëdha, ato duhet të riparohen. Primerët e lëngshëm zakonisht janë gati për përdorim; përzierjet e thata duhet së pari të hollohen me ujë. Disa lloje abetaresh kërkojnë përzierje të vazhdueshme dhe të plotë.
Është i përshtatshëm për të aplikuar përbërjen me një rul, pasi mbulon sipërfaqe të madhe. Në zonat e vështira është më mirë të kaloni me një furçë. Për vëllime të mëdha pune, mund të përdorni një armë llak. Në të njëjtën kohë, është më mirë të shtoni lëng shtesë në abetare me depërtim të thellë për beton në një sasi prej 5% të vëllimit të përgjithshëm. Kjo bëhet në mënyrë që përzierja të mos ngecë në zorrët dhe grykën. Vetë prodhuesit japin këshilla të tilla.
Gjatë aplikimit të përbërjes, duhet të siguroheni që ajo të shtrihet në një shtresë të barabartë. Pas kësaj, sigurohuni që abetarja të thahet plotësisht. Koha tregohet në paketim, por mund ta merrni me mend sipas hijes. Nëse baza është e dobët dhe shkërmoqet, i gjithë procesi duhet të përsëritet.
Siç këshillojnë shumë ekspertë, është më mirë të punoni me primer në temperatura pozitive nga 5 në 25 °. Sa i përket lagështisë, përpiquni të mbani një nivel jo më shumë se 65%. Përndryshe, përzierja do të fillojë të shkumëzojë gjatë trajtimit sipërfaqësor. Përbërjet poliuretani janë një përjashtim.
Nëse baza e betonit është e dendur, atëherë, sipas këshillave të shumë ekspertëve, mund të përdorni një përzierje kontakti betoni. Ai përfshin rërë kuarci fraksion i imët, për shkak të të cilit materialet e përfundimit ngjiten më mirë në një sipërfaqe të lëmuar. Përbërja është e përshtatshme për punë të jashtme dhe të brendshme.
Kur aplikoni një primer me depërtim të thellë, konsumi i tij do të varet nga sipërfaqja. Siç tregon praktika, për 1 m². m do të duhen 80-120 gram.
Gjatë përpunimit, duhet të respektohen masat paraprake të sigurisë. Punoni me doreza gome dhe sigurohuni që abetarja të mos ju hyjë në sy. Nëse kjo nuk mund të shmanget, shpëlajini ato menjëherë ujë të ngrohtë. Për të përjashtuar një rast të tillë, është më mirë të punoni me syze.
Çështja e çmimit
Për sa i përket kostos, në treg mund të gjeni çmime të ndryshme. Abetaret poliuretani zënë një vend më të shtrenjtë, duke filluar nga 4,000 rubla. Përzierjet akrilike janë më të përballueshme. Për shembull, marka "Optimist g101" shitet për 300 rubla për 10 litra. Kostoja e KnaufTiefengrund dhe Ceresit CT 17 është pak më shumë se 600 rubla për të njëjtin vëllim. Primeri nën emrin e markës "Prospectors" shitet në rajonin prej 350 deri në 500 rubla për të njëjtat 10 litra.
Puna e riparimit do të jetë e lirë nëse e zgjidhni që në fillim abetarja e kërkuar depërtim i thellë për beton. Kompozime të tilla jo vetëm që rrisin jetën e shërbimit të sipërfaqes, por gjithashtu e bëjnë përfundimin e mëvonshëm më të lirë.
Në çdo sipërfaqe të fortë, përfshirë betonin, ka domosdoshmërisht pore të madhësive të ndryshme, mikroçarje dhe një përqindje të caktuar pluhuri. Përveç kësaj, betoni në shumicën e rasteve ka një sipërfaqe të lëmuar. Në një sipërfaqe të tillë praktikisht nuk ka asgjë për të kapur materialet e përfundimit. Por me ndihmën tokë e mirë, ju mund ta zgjidhni këtë dhe jo vetëm këtë problem.
Pse të përdorni një abetare
Kjo procedurë mund të ndjekë disa qëllime në të njëjtën kohë.
Para së gjithash, për të rritur vetitë mbajtëse të betonit, në gjuhën e profesionistëve kjo quhet ngjitje në rritje.
- Edhe pse betoni në vetvete është një material mjaft i fortë, ai gjithashtu kërkon një mbrojtje.. Lagështia mund të depërtojë në poret dhe temperaturat e ulëta gris sipërfaqen. Së bashku me lagështinë, mund të depërtojnë substanca kimikisht aktive, të cilat gjithashtu mund të shkatërrojnë strukturën e betonit.
- Një faktor tjetër i rëndësishëm është mbrojtja e sipërfaqes nga dëmtuesit.. Sigurisht, brejtësit dhe insektet nuk janë të rrezikshëm për betonin, por myku ose myku mund të vendosen në sipërfaqe dhe të shkaktojnë shqetësime serioze.
- Dhe së fundi, pluhur i thjeshtë ndërtimi. Çdo udhëzim jepet para fillimit punimet e mbarimit pastroni plotësisht sipërfaqen. Për disa materiale ballore kjo nuk është e rëndësishme. Por, për shembull, bojë nuk mund të aplikohet në një sipërfaqe me pluhur. Abetarja lidh plotësisht grimcat e pluhurit dhe i kthen ato në një pjesë të monolitit.
E rëndësishme: një sipërfaqe e shtruar mirë mund të zvogëlojë ndjeshëm konsumin e materialit përballues.
Kjo është veçanërisht e vërtetë për llaqet dhe bojërat, çmimi i të cilave është larg të qenit i përballueshëm.
Llojet e tokës dhe hollësitë e përdorimit
Aktualisht ka mjaft në treg zgjedhje e gjerë kompozime abetare të destinuara për përpunimin e betonit. Por para se të blini, do të jetë e dobishme të vendosni për çfarë qëllimi specifik keni nevojë për tokë. Pas kësaj do të jetë më e lehtë të zgjidhni përbërjen e duhur.
Llojet e kompozimeve
Betoni është një sipërfaqe minerale, dhe në përputhje me rrethanat përbërja duhet të zgjidhet për sipërfaqet minerale.
Ka disa prej tyre në treg.
- Abetare akrilike - kanë përshkueshmëri të shkëlqyeshme të avullit, të aplikuara para lyerjes me llaqe dhe bojëra akrilike. Mund të përdoret në ambiente të mbyllura hapësirat e brendshme, praktikisht pa erë, thahet brenda 1 – 3 orësh.
- Primerët e polistirenit gjithashtu thahen shpejt, por përmbajnë tretës me erë të fortë, gjë që i bën ato të rekomanduara për sipërfaqe të jashtme ose të brendshme të ajrosura mirë. Mund të aplikohet si në sipërfaqe betoni ashtu edhe në sipërfaqe të suvatuara.
- Primerët e polivinilacetatit thahen brenda gjysmë ore. Përdoret ekskluzivisht për punë të brendshme. Aplikoni nën ngjyra ose letër-muri që përmbajnë PVA.
- Abetare poliuretani - kjo përbërje mund të përdoret si një shtresë bazë për bojërat poliuretani dhe si një shtresë e pavarur. Kjo shtresë nuk ka frikë nga njollat e naftës ose benzinës; mund t'i rezistojë lehtësisht ekspozimit detergjentët. Por një abetare e tillë do të marrë të paktën 12 orë për t'u tharë, vetëm pas së cilës mund të pikturohet.
- Abetare epokside me dy përbërës - përdoret si shtresë përgatitore për bojërat dhe llaqet epokside, por më shpesh përdoret si një shtresë e pavarur. Përparësitë kryesore këtu janë rezistenca absolute ndaj ujit, rritja e rezistencës ndaj substancave kimikisht aktive, dhe më e rëndësishmja, kjo përbërje është më pak e ndjeshme ndaj stresit mekanik, për shkak të së cilës përdoret gjerësisht në rregullimin e punëtorive të prodhimit.
Klasifikimi sipas qëllimit
- Kompozime impregnuese - ky lloj Komponimet përdoren për të forcuar sipërfaqet e lirshme ose të paqëndrueshme. Me ndihmën e tyre, sipërfaqet e betonit dhe të suvatuara mund të pastrohen. Këto lloje toke janë të afta të depërtojnë thellë në monolit deri në një thellësi prej 50 mm.
Ata lidhen dhe forcohen në mënyrë të sigurt shtresa e sipërme. Këto komponime përdoren gjerësisht gjatë punës restauruese ose për të forcuar bazën, e cila për disa arsye nuk mund të çmontohet. - Përbërjet me depërtim të thellë - një abetare betoni me depërtim të thellë, ndryshe nga një abetare ngopëse, përdoret për të trajtuar një sipërfaqe të fortë monolit. Ai depërton në një thellësi prej 5 - 7 mm. Ai përmban mikrogrimca të lateksit, për shkak të të cilave në sipërfaqe formohet një film mbulues i vazhdueshëm.
- Komponimet ngjitëse - këto lloje toke formojnë një film të papërshkueshëm. Toka të tilla përmbajnë mikrogrimca që sigurojnë ngjitje të shtuar. Për shembull, pas veshjes me një përbërje që përmban grimca kuarci, betoni bëhet i ashpër në prekje dhe një shtresë suvaje fiksohet lehtësisht në të.
Për më tepër, kompozime të tilla mund të aplikohen jo vetëm në beton të pastër, por edhe në sipërfaqe të lyera.
E rëndësishme: nëse prerja e betonit të armuar me rrota diamanti ose, në disa raste, shpimi i vrimave me diamant në beton, atëherë çdo punë e mbushjes kryhet pas punës së madhe.
Teknologjia e përdorimit
Kryerja e kësaj lloj pune nuk kërkon asnjë kualifikim. Kushdo që di të përdorë një furçë bojë, mund të aplikojë abetare me duart e veta.
Sekuenca është thjesht e thjeshtë dhe e arritshme.
- Tradicionalisht, çdo sipërfaqe duhet të pastrohet mirë përpara trajtimit. Edhe para aplikimit të komponimeve impregnuese, mbeturinat e mëdha duhet të hiqen. Ekspertët këshillojnë të mos hiqni bojën e rrënjosur shumë. Mjafton ta rëmoni lehtë.
Nëse nuk keni në dorë një fshesë me korrent industrial, thjesht mund ta fshini me një leckë të lagur. - Gropat dhe çarjet e mëdha zakonisht mbushen me llaç gipsi.
- Vlen t'i kushtohet vëmendje nivelit të lagështisë së sipërfaqes që do të lyhet. Shumica e përbërjeve aplikohen ekskluzivisht në një sipërfaqe të thatë në një temperaturë pozitive prej +5º C.
- Drejtimi i aplikimit nuk ka rëndësi thelbësore. Por, si rregull, si abetarja ashtu edhe boja aplikohen nga lart poshtë.
- Mjeti me të cilin do të punoni zgjidhet gjithashtu në varësi të preferencave personale; mund të jetë një rul me shkumë, një furçë bojë, një shpatull i gjerë ose një armë spërkatës.
Primeri i përket atyre llojeve të materialeve të ndërtimit që bëhen të padukshme pas tharjes. Por në të njëjtën kohë, përdorimi i tyre rrit cilësinë e punës së brendshme dhe të jashtme. Një shtresë e hollë e primerit rrit qëndrueshmërinë dhe përmirëson vetitë ngjitëse të sipërfaqeve.
Abetare mbi sipërfaqet e betonit
Betoni shkatërrohet lehtësisht nën ndikimin e faktorëve të ndryshëm: shiu, era, dridhjet, etj. Karakteristikat e tokës për beton:
- Sipërfaqja e betonit është e ashpër. Përzierja e primerit, duke mbushur edhe poret dhe çarjet e vogla, e lustron atë. Kjo e bën më të lehtë punën e mëtejshme të riparimit.
- Një abetare betoni rrit vetitë ngjitëse midis murit dhe shtresës tjetër të veshjes. Dhe kjo rrit jetën e shërbimit të materialeve të ndërtimit.
- Mbushja e mureve rrit forcën e themelit. E rëndësishme është rrjedhshmëria e betonit, i cili edhe me dridhje të vogla jep çarje, të cilat zgjerohen dhe shkatërrojnë ndërtesën.
- Nëse një mur ose dysheme betoni nuk mbulohet gjatë punimeve të jashtme përbërje abetare, shkatërrohet nën ndikimin e faktorëve natyrorë: nga shiu, era, kërpudhat e ndryshme, myku dhe organizma të tjerë biologjikë.
- Për shkak të faktit se pas mbushjes sipërfaqja bëhet mat, konsumi i përzierjeve të shtresave pasuese gjatë aplikimit të bojës ose veshjes me një zgjidhje zvogëlohet.
- Një abetare e mirë për beton do të mbajë lagështinë, e cila kërkohet për përfundimin, do të parandalojë formimin e pluhurit, depozitave të kërpudhave dhe nuk do të thajë mbulesën e murit.
Kërpudhat në mur dhe tavan betoni
Llojet dhe karakteristikat e materialeve të abetareve
Përzierja e tokës përmban substanca të veçanta. Përbërja dhe përqendrimi i tyre sugjerojnë sipërfaqen e përdorimit - beton, metal ose dru. Llojet e primerit:
- Primeri alkid përdoret në sipërfaqe druri. Kjo bëhet kur druri përpunohet para lyerjes së mëtejshme. Ky material - ngjyra të ndryshme, në mënyrë që të "prekni" shtresën e sipërme të drurit. Nuk përdoret për punime në beton apo metal.
- Primeri epoksi është i holluar me një tretës të veçantë. Çdo prodhues ka formulën e vet. Për shkak të toksicitetit të lartë, një material i tillë përdoret jashtëzakonisht rrallë në jetën e përditshme. Primeri epoksi aplikohet në një sipërfaqe të trajtuar më parë me suva. Kjo kërkohet përpara se të vendoset pllaka ose lyerja në mur.
Ky abetare përdoret kur kryeni punë riparimi jashtë ndërtesës ose brenda hapsira te hapura. Sepse toksinat që përmban abetarja epoksi, duke avulluar, hyjnë në trupin e njeriut dhe e helmojnë atë. Rekomandohet ta përdorni kur punoni në metal.
- Më i famshmi është abetarja akrilike. Nuk ka erë të fortë dhe ndërvepron mirë me sipërfaqe të ndryshme, thahet shpejt dhe bën të mundur kryerjen e punës së mëtejshme.
Llojet e abetareve
Primer akrilik ofrohet për përdorim në beton dhe metal. Është i mirë për përdorim të brendshëm, veçanërisht për dhomat e fëmijëve.
- Abetarja metalike ndryshon nga llojet e tjera në atë që mbron sipërfaqet metalike nga korrozioni. Përzierja përfshin zink, i cili mbron sipërfaqen nga ndryshku.
Karakteristikat e abetares për beton
Të gjitha llojet e dherave të përdorura për të punuar në dru, metal ose beton u diskutuan më lart. Megjithatë, jo të gjitha janë të përshtatshme për sipërfaqe sfungjer dhe të lirshme.
Nëse sipërfaqja që do të riparohet ka shumë pore dhe ato janë të thella, atëherë përdoret një primer me penetrim të thellë. Kjo përzierje depërton deri në 7 mm thellësi. Përbërja përmban grimca të vogla lateksi me një nivel të lartë ngjitjeje për të përmirësuar ngjitjen e murit të betonit me materialin që aplikohet në të.
Nëse muri i ndërtesës është i vjetër dhe i lirshëm, atëherë gjatë riparimeve përdoret dheu impregnues. Kjo përzierje impregnon dhe lidh në mënyrë të besueshme grimcat më të vogla të betonit.
Edhe kur punohet në beton, përdoren përbërjet ngjitëse të tokës. Ata krijojnë një film që "ngjit" fort betonin në shtresën tjetër.
Komentet:
Abetare për beton është shumë material i rëndësishëm, pa të cilën thjesht nuk mund të bëni kur rinovoni një dhomë të tërë ose mure individuale, ndarje ose të tjera elementet strukturore prej betoni. Abetarja në këtë rast do të kryejë shumë funksione, pa të cilat aplikimi i të gjitha veshjeve të tjera do të jetë i cilësisë së dobët.
Abetarja aplikohet para se të lyhet dyshemeja prej betoni.
Funksionet e një abetareje për një sipërfaqe betoni
Si rregull, sipërfaqet e betonit janë shumë të prirura për t'u shkatërruar dhe mund të dëmtohen nën ndikimin e faktorëve të jashtëm mekanikë dhe të jashtëm natyrorë. Prandaj, është shumë e rëndësishme të kuptojmë se cilat funksione kryesore kryen një abetare posaçërisht për sipërfaqet e betonit.
- Si rregull, është abetarja që ju ofron mundësinë për të aplikuar të gjitha shtresat pasuese në mënyrë sa më të barabartë: stuko, bojë, zam letër-muri. Për shkak të faktit se abetarja është e bllokuar në të gjitha, edhe në poret më të vogla, e bën sipërfaqen e betonit të përshtatshme për përpunim me të gjitha materialet e tjera.
- Veshja me primer siguron një shkallë të mirë ngjitjeje midis murit të betonit dhe veshjes tjetër. Ky ngjitje e bën riparimin të besueshëm, pasi pavarësisht se me çfarë trajtoni murin, gjithçka do të ngjitet mirë, gjë që do të rrisë shumë jetëgjatësinë e materialeve. Kjo është veçanërisht e vërtetë për letër-muri, pllaka dhe bojëra.
- Forca optimale e bazës është një nga qëllimet më të rëndësishme të mbushjes së një sipërfaqe betoni. Nëse e neglizhoni mbushjen, muri do të fillojë të shembet pas një periudhe të shkurtër kohe. Këto nuk do të jenë domosdoshmërisht çarje të mëdha dhe copa betoni që bien. Edhe defektet e vogla dhe brishtësia e materialit thjesht mund të çojnë në pasoja katastrofike në të ardhmen.
- Një funksion tjetër i rëndësishëm i abetares është mbrojtja e betonit nga faktorët dëmtues. mjedisi i jashtëm, si acidet, alkalet, uji, era, kërpudhat dhe myku, të cilat zhvillohen mirë në sipërfaqen e betonit të patrajtuar me përbërje të veçanta.
- Është një abetare me cilësi të lartë që ju lejon të zvogëloni konsumin e shtresës tjetër të materialit. Kjo vlen për sipërfaqet që planifikoni të lyeni, lyeni me ngjitës ose solucione. Kjo arrihet për shkak të ngjitjes dhe mbylljes më të mirë të mikroporeve që ekzistojnë në beton.
- Toka e mirë mund të mbajë lagështinë në mur për një kohë të gjatë. Në të njëjtën kohë, një lagështi e tillë parandalon në të njëjtën kohë kërpudhat të shumohen dhe sipërfaqja të thahet. Dhe kjo është jashtëzakonisht e rëndësishme, pasi është shumë më e lehtë të punosh në një sipërfaqe të lagur dhe pluhuri nuk do të shfaqet.
Pra, nga të gjitha sa më sipër, është e lehtë të kuptohet se aplikimi i një abetare të veçantë në beton është jashtëzakonisht i rëndësishëm dhe i nevojshëm. Pa këtë, riparimet mund të konsiderohen pothuajse të pakuptimta, sepse asnjë material nuk do të ngjitet fort në mur.
Kthehu te përmbajtja
Llojet e abetareve për beton sipas përbërjes
Si rregull, çdo lloj sipërfaqe kërkon abetaren e vet. Sipërfaqet e betonit nuk bëjnë përjashtim, për të cilat ekspertët kanë zhvilluar disa lloje abetaresh. Le të shqyrtojmë ato kryesore në më shumë detaje me të gjitha hollësitë.
- Abetaret e polistirenit konsiderohen si më rrallë të përdorur në jetën e përditshme. Kjo për faktin se ato përmbajnë tretës që kanë një shkallë të caktuar toksiciteti. Si rregull, abetare të tilla zakonisht aplikohen ekskluzivisht në një sipërfaqe të suvatuar, e cila më pas supozohet të jetë e shtruar me pllaka ose e lyer me disa shtresa bojë. Komponimet e primerit të polistirenit duhet të përdoren vetëm në zona të hapura. Përndryshe, toksinat do të avullojnë me kalimin e kohës dhe do të helmojnë trupin tuaj në pjesë të vogla. Kjo është veçanërisht e rrezikshme për fëmijët. Abetare të tilla përdoren në raste të jashtëzakonshme për përfundimin e pllakave të caktuara ose për bojëra specifike që kërkojnë vetëm një shtresë të tillë bazë.
- Primerët më të mirë dhe më të zakonshëm janë akrilik. Avantazhi i tyre është se nuk kanë erë të fortë, përzihen në mënyrë perfekte me çdo sipërfaqe dhe përthithen shumë shpejt. Duke përdorur një lëng të tillë për trajtimin e betonit, mund të filloni fazën tjetër të përfundimit të sipërfaqes në vetëm 4 orë. Abetaret akrilike janë ideale për përfundimin e strukturave të betonit në ambiente të mbyllura, duke përfshirë dhomat e fëmijëve. Por nuk rekomandohet përdorimi i tyre për fasada për shkak të përthithjes shumë të shpejtë, dhe në të njëjtën kohë tharjes.
- Nëse dëshironi të lyeni muret e brendshme me një shtresë të hollë bojë ose të dekoroni me letër-muri, atëherë mund të përdorni abetare super të shpejta - polivinil acetat. Si rregull, ato do të thahen për rreth 30-40 minuta, pas së cilës muri mund të lyhet me zam PVA. Do të sigurohet shkalla maksimale e ngjitjes.
Kthehu te përmbajtja
Zgjedhja e llojit të primerit në bazë të cilësisë së bazës
Por përveç këtij klasifikimi, ekziston një tjetër që ju lejon të zgjidhni llojin optimal të abetares bazuar në porozitetin dhe shkallën e lirshmërisë së sipërfaqes së betonit. Ekzistojnë tre lloje të abetareve të tilla në total, të cilat tani do të përshkruhen më në detaje:
- Astaret me depërtim të thellë janë të destinuara kryesisht për sipërfaqet e betonit me të cilat janë të veshura sasi e madhe por. Për më tepër, këto pore janë mjaft të thella. Është e rëndësishme që sipërfaqja të mos jetë shumë e lirshme. Primerët me depërtim të thellë janë në gjendje të depërtojnë afërsisht 5-7 mm në sipërfaqe. Si rregull, ky lloj i përbërjes së tokës ka një shkallë të lartë ngjitjeje, e cila është kaq e rëndësishme në kushtet e poreve të thella. Kjo arrihet për shkak të përmbajtjes së grimcave të vogla të lateksit në lëng, të cilat, si shirita të vegjël gome ngjitëse, ngjitin me njëri-tjetrin betonin dhe materialin që aplikohet në të.
- Përbërjet impregnuese të tokës përdoren më së miri për sipërfaqet e vjetra të betonit që janë veçanërisht të lirshme. Abetare të tilla mund të përdoren edhe për mure që kanë shumë pore. Por ato do të jenë veçanërisht efektive për rindërtim. Falë një përbërësi të veçantë lidhës, abetarja ngopëse lidh në mënyrë të përsosur të gjitha grimcat më të vogla. Disa nga llojet më të shtrenjta të këtij lloji të përbërjes madje mund të forcojnë në mënyrë të konsiderueshme dhe të përhershme mure që më parë dukeshin të papërshtatshme. Sa më shumë nga ky abetare të aplikohet në beton në intervale të caktuara, aq më mirë do të forcohet dhe do të ndalojë rrënimin dhe shembjen.
- Dhe së fundi, një lloj tjetër abetare është një abetare ngjitëse për beton. Kjo përbërje është e aftë të formojë një film të veçantë të qëndrueshëm të padukshëm në sipërfaqe, falë të cilit do të jetë e mundur të ngjitet lehtësisht dhe me besueshmëri sipërfaqja e murit me materiale të tjera përfundimi.
Është shumë e përshtatshme të aplikoni një abetare të tillë në një sipërfaqe të lëmuar betoni që tashmë është lyer ose trajtuar më parë me stuko. Lejohet gjithashtu aplikimi i përbërjes në një mur relativisht të lëmuar përpara suvatimit, nëse shtresa e synuar e suvasë së aplikuar nuk është shumë e trashë.
Kthehu te përmbajtja
Rregullat për zgjedhjen e një abetare për beton
Tani është koha për të marrë në konsideratë parametrat kryesorë për zgjedhjen e një përbërje të vërtetë të cilësisë së lartë të tokës për një mur betoni.
Si të zgjidhni abetare për beton? Sigurisht, para së gjithash duhet të vendosni për llojin e abetares bazuar në materialin e mësipërm. Por është gjithashtu e rëndësishme të merren parasysh hollësitë e mëposhtme:
- Është më mirë të zgjidhni një abetare që përmban një sasi të mjaftueshme antiseptiku, pavarësisht nga lloji i tij. Kjo do të parandalojë shfaqjen e mykut në mure paraprakisht. Për zona të lagështa blini një abetare me një përmbajtje të lartë të antiseptikëve të fortë.
- Mendoni gjithmonë nëse do të përfundoni brendësinë apo pjesën e jashtme të dhomës me abetaren e blerë. Për muret e jashtme, përdorni një astar fasade që nuk thahet aq shpejt. Për muret e brendshme mund të përdoren formulime konvencionale.
- Mendoni se cilën dëshironi të përdorni materiali i mbarimit. Është e nevojshme të mendoni paraprakisht jo vetëm për shtresën që do të jetë ngjitur drejtpërdrejt me sipërfaqen e betonit, por edhe për të gjitha shtresat pasuese. Shumë prodhues prodhojnë lloje të ndryshme abetaresh, të cilat ndryshojnë pak nga njëri-tjetri në konsistencë dhe përbërje për tipe te ndryshme duke përfunduar. Kjo do t'ju lejojë të përfundoni murin me cilësinë dhe besueshmërinë më të lartë.
- Gjithmonë jepni përparësi kur zgjidhni prodhuesit e njohur. Nuk është aspak e nevojshme që abetare e mirë do të jetë e shtrenjtë. Çmimi i tij mund të jetë mesatar në krahasim me të gjithë të tjerët, ose edhe i ulët. Gjëja kryesore është mirësjellja dhe ndershmëria e prodhuesit.
- Kur blini tokë muret e betonit Kushtojini vëmendje mbrojtjes kundër falsifikimit, si dhe datës së prodhimit. Nëse substanca ka skaduar, atëherë mund të themi me besim se nuk do të ketë efektin e dëshiruar në beton. E njëjta gjë vlen edhe për falsifikimet.